#$@%#$%!

Ngiler SH3LL 360
: / proc / thread-self / root / usr / share / perl5 /

Information Server
MySQL : OFF Perl : OFF CURL : ON WGET : OFF PKEXEC : OFF

Directive	Local Value
IP Address	162.0.209.101
System	Linux premium169.web-hosting.com 4.18.0-553.50.1.lve.el8.x86_64 #1 SMP Thu Apr 17 19:10:24 UTC 2025 x86_64
User	luxeelil
PHP Version	8.0.30
Software	LiteSpeed
Doc root	Writable

Edit File : Benchmark.pm \| Size : 30.30 KB
package Benchmark; use strict; =head1 NAME Benchmark - benchmark running times of Perl code =head1 SYNOPSIS use Benchmark qw(:all) ; timethis ($count, "code"); # Use Perl code in strings... timethese($count, { 'Name1' => '...code1...', 'Name2' => '...code2...', }); # ... or use subroutine references. timethese($count, { 'Name1' => sub { ...code1... }, 'Name2' => sub { ...code2... }, }); # cmpthese can be used both ways as well cmpthese($count, { 'Name1' => '...code1...', 'Name2' => '...code2...', }); cmpthese($count, { 'Name1' => sub { ...code1... }, 'Name2' => sub { ...code2... }, }); # ...or in two stages $results = timethese($count, { 'Name1' => sub { ...code1... }, 'Name2' => sub { ...code2... }, }, 'none' ); cmpthese( $results ) ; $t = timeit($count, '...other code...') print "$count loops of other code took:",timestr($t),"\n"; $t = countit($time, '...other code...') $count = $t->iters ; print "$count loops of other code took:",timestr($t),"\n"; # enable hires wallclock timing if possible use Benchmark ':hireswallclock'; =head1 DESCRIPTION The Benchmark module encapsulates a number of routines to help you figure out how long it takes to execute some code. timethis - run a chunk of code several times timethese - run several chunks of code several times cmpthese - print results of timethese as a comparison chart timeit - run a chunk of code and see how long it goes countit - see how many times a chunk of code runs in a given time =head2 Methods =over 10 =item new Returns the current time. Example: use Benchmark; $t0 = Benchmark->new; # ... your code here ... $t1 = Benchmark->new; $td = timediff($t1, $t0); print "the code took:",timestr($td),"\n"; =item debug Enables or disable debugging by setting the C<$Benchmark::Debug> flag: Benchmark->debug(1); $t = timeit(10, ' 5 ** $Global '); Benchmark->debug(0); =item iters Returns the number of iterations. =back =head2 Standard Exports The following routines will be exported into your namespace if you use the Benchmark module: =over 10 =item timeit(COUNT, CODE) Arguments: COUNT is the number of times to run the loop, and CODE is the code to run. CODE may be either a code reference or a string to be eval'd; either way it will be run in the caller's package. Returns: a Benchmark object. =item timethis ( COUNT, CODE, [ TITLE, [ STYLE ]] ) Time COUNT iterations of CODE. CODE may be a string to eval or a code reference; either way the CODE will run in the caller's package. Results will be printed to STDOUT as TITLE followed by the times. TITLE defaults to "timethis COUNT" if none is provided. STYLE determines the format of the output, as described for timestr() below. The COUNT can be zero or negative: this means the I<minimum number of CPU seconds> to run. A zero signifies the default of 3 seconds. For example to run at least for 10 seconds: timethis(-10, $code) or to run two pieces of code tests for at least 3 seconds: timethese(0, { test1 => '...', test2 => '...'}) CPU seconds is, in UNIX terms, the user time plus the system time of the process itself, as opposed to the real (wallclock) time and the time spent by the child processes. Less than 0.1 seconds is not accepted (-0.01 as the count, for example, will cause a fatal runtime exception). Note that the CPU seconds is the B<minimum> time: CPU scheduling and other operating system factors may complicate the attempt so that a little bit more time is spent. The benchmark output will, however, also tell the number of C<$code> runs/second, which should be a more interesting number than the actually spent seconds. Returns a Benchmark object. =item timethese ( COUNT, CODEHASHREF, [ STYLE ] ) The CODEHASHREF is a reference to a hash containing names as keys and either a string to eval or a code reference for each value. For each (KEY, VALUE) pair in the CODEHASHREF, this routine will call timethis(COUNT, VALUE, KEY, STYLE) The routines are called in string comparison order of KEY. The COUNT can be zero or negative, see timethis(). Returns a hash reference of Benchmark objects, keyed by name. =item timediff ( T1, T2 ) Returns the difference between two Benchmark times as a Benchmark object suitable for passing to timestr(). =item timestr ( TIMEDIFF, [ STYLE, [ FORMAT ] ] ) Returns a string that formats the times in the TIMEDIFF object in the requested STYLE. TIMEDIFF is expected to be a Benchmark object similar to that returned by timediff(). STYLE can be any of 'all', 'none', 'noc', 'nop' or 'auto'. 'all' shows each of the 5 times available ('wallclock' time, user time, system time, user time of children, and system time of children). 'noc' shows all except the two children times. 'nop' shows only wallclock and the two children times. 'auto' (the default) will act as 'all' unless the children times are both zero, in which case it acts as 'noc'. 'none' prevents output. FORMAT is the L<printf(3)>-style format specifier (without the leading '%') to use to print the times. It defaults to '5.2f'. =back =head2 Optional Exports The following routines will be exported into your namespace if you specifically ask that they be imported: =over 10 =item clearcache ( COUNT ) Clear the cached time for COUNT rounds of the null loop. =item clearallcache ( ) Clear all cached times. =item cmpthese ( COUNT, CODEHASHREF, [ STYLE ] ) =item cmpthese ( RESULTSHASHREF, [ STYLE ] ) Optionally calls timethese(), then outputs comparison chart. This: cmpthese( -1, { a => "++\$i", b => "\$i = 2" } ) ; outputs a chart like: Rate b a b 2831802/s -- -61% a 7208959/s 155% -- This chart is sorted from slowest to fastest, and shows the percent speed difference between each pair of tests. C<cmpthese> can also be passed the data structure that timethese() returns: $results = timethese( -1, { a => "++\$i", b => "\$i = 2" } ) ; cmpthese( $results ); in case you want to see both sets of results. If the first argument is an unblessed hash reference, that is RESULTSHASHREF; otherwise that is COUNT. Returns a reference to an ARRAY of rows, each row is an ARRAY of cells from the above chart, including labels. This: my $rows = cmpthese( -1, { a => '++$i', b => '$i = 2' }, "none" ); returns a data structure like: [ [ '', 'Rate', 'b', 'a' ], [ 'b', '2885232/s', '--', '-59%' ], [ 'a', '7099126/s', '146%', '--' ], ] B<NOTE>: This result value differs from previous versions, which returned the C<timethese()> result structure. If you want that, just use the two statement C<timethese>...C<cmpthese> idiom shown above. Incidentally, note the variance in the result values between the two examples; this is typical of benchmarking. If this were a real benchmark, you would probably want to run a lot more iterations. =item countit(TIME, CODE) Arguments: TIME is the minimum length of time to run CODE for, and CODE is the code to run. CODE may be either a code reference or a string to be eval'd; either way it will be run in the caller's package. TIME is I<not> negative. countit() will run the loop many times to calculate the speed of CODE before running it for TIME. The actual time run for will usually be greater than TIME due to system clock resolution, so it's best to look at the number of iterations divided by the times that you are concerned with, not just the iterations. Returns: a Benchmark object. =item disablecache ( ) Disable caching of timings for the null loop. This will force Benchmark to recalculate these timings for each new piece of code timed. =item enablecache ( ) Enable caching of timings for the null loop. The time taken for COUNT rounds of the null loop will be calculated only once for each different COUNT used. =item timesum ( T1, T2 ) Returns the sum of two Benchmark times as a Benchmark object suitable for passing to timestr(). =back =head2 :hireswallclock If the Time::HiRes module has been installed, you can specify the special tag C<:hireswallclock> for Benchmark (if Time::HiRes is not available, the tag will be silently ignored). This tag will cause the wallclock time to be measured in microseconds, instead of integer seconds. Note though that the speed computations are still conducted in CPU time, not wallclock time. =head1 Benchmark Object Many of the functions in this module return a Benchmark object, or in the case of C<timethese()>, a reference to a hash, the values of which are Benchmark objects. This is useful if you want to store or further process results from Benchmark functions. Internally the Benchmark object holds timing values, described in L</"NOTES"> below. The following methods can be used to access them: =over 4 =item cpu_p Total CPU (User + System) of the main (parent) process. =item cpu_c Total CPU (User + System) of any children processes. =item cpu_a Total CPU of parent and any children processes. =item real Real elapsed time "wallclock seconds". =item iters Number of iterations run. =back The following illustrates use of the Benchmark object: $result = timethis(100000, sub { ... }); print "total CPU = ", $result->cpu_a, "\n"; =head1 NOTES The data is stored as a list of values from the time and times functions: ($real, $user, $system, $children_user, $children_system, $iters) in seconds for the whole loop (not divided by the number of rounds). The timing is done using time(3) and times(3). Code is executed in the caller's package. The time of the null loop (a loop with the same number of rounds but empty loop body) is subtracted from the time of the real loop. The null loop times can be cached, the key being the number of rounds. The caching can be controlled using calls like these: clearcache($key); clearallcache(); disablecache(); enablecache(); Caching is off by default, as it can (usually slightly) decrease accuracy and does not usually noticeably affect runtimes. =head1 EXAMPLES For example, use Benchmark qw( cmpthese ) ; $x = 3; cmpthese( -5, { a => sub{$x$x}, b => sub{$x*2}, } ); outputs something like this: Benchmark: running a, b, each for at least 5 CPU seconds... Rate b a b 1559428/s -- -62% a 4152037/s 166% -- while use Benchmark qw( timethese cmpthese ) ; $x = 3; $r = timethese( -5, { a => sub{$x$x}, b => sub{$x*2}, } ); cmpthese $r; outputs something like this: Benchmark: running a, b, each for at least 5 CPU seconds... a: 10 wallclock secs ( 5.14 usr + 0.13 sys = 5.27 CPU) @ 3835055.60/s (n=20210743) b: 5 wallclock secs ( 5.41 usr + 0.00 sys = 5.41 CPU) @ 1574944.92/s (n=8520452) Rate b a b 1574945/s -- -59% a 3835056/s 144% -- =head1 INHERITANCE Benchmark inherits from no other class, except of course from Exporter. =head1 CAVEATS Comparing eval'd strings with code references will give you inaccurate results: a code reference will show a slightly slower execution time than the equivalent eval'd string. The real time timing is done using time(2) and the granularity is therefore only one second. Short tests may produce negative figures because perl can appear to take longer to execute the empty loop than a short test; try: timethis(100,'1'); The system time of the null loop might be slightly more than the system time of the loop with the actual code and therefore the difference might end up being E<lt> 0. =head1 SEE ALSO L<Devel::NYTProf> - a Perl code profiler =head1 AUTHORS Jarkko Hietaniemi <F<jhi@iki.fi>>, Tim Bunce <F<Tim.Bunce@ig.co.uk>> =head1 MODIFICATION HISTORY September 8th, 1994; by Tim Bunce. March 28th, 1997; by Hugo van der Sanden: added support for code references and the already documented 'debug' method; revamped documentation. April 04-07th, 1997: by Jarkko Hietaniemi, added the run-for-some-time functionality. September, 1999; by Barrie Slaymaker: math fixes and accuracy and efficiency tweaks. Added cmpthese(). A result is now returned from timethese(). Exposed countit() (was runfor()). December, 2001; by Nicholas Clark: make timestr() recognise the style 'none' and return an empty string. If cmpthese is calling timethese, make it pass the style in. (so that 'none' will suppress output). Make sub new dump its debugging output to STDERR, to be consistent with everything else. All bugs found while writing a regression test. September, 2002; by Jarkko Hietaniemi: add ':hireswallclock' special tag. February, 2004; by Chia-liang Kao: make cmpthese and timestr use time statistics for children instead of parent when the style is 'nop'. November, 2007; by Christophe Grosjean: make cmpthese and timestr compute time consistently with style argument, default is 'all' not 'noc' any more. =cut # evaluate something in a clean lexical environment sub _doeval { no strict; eval shift } # # put any lexicals at file scope AFTER here # use Carp; use Exporter; our(@ISA, @EXPORT, @EXPORT_OK, %EXPORT_TAGS, $VERSION); @ISA=qw(Exporter); @EXPORT=qw(timeit timethis timethese timediff timestr); @EXPORT_OK=qw(timesum cmpthese countit clearcache clearallcache disablecache enablecache); %EXPORT_TAGS=( all => [ @EXPORT, @EXPORT_OK ] ) ; $VERSION = 1.22; # --- ':hireswallclock' special handling my $hirestime; sub mytime () { time } init(); sub BEGIN { if (eval 'require Time::HiRes') { import Time::HiRes qw(time); $hirestime = \&Time::HiRes::time; } } sub import { my $class = shift; if (grep { $_ eq ":hireswallclock" } @_) { @_ = grep { $_ ne ":hireswallclock" } @_; local $^W=0; mytime = $hirestime if defined $hirestime; } Benchmark->export_to_level(1, $class, @_); } our($Debug, $Min_Count, $Min_CPU, $Default_Format, $Default_Style, %_Usage, %Cache, $Do_Cache); sub init { $Debug = 0; $Min_Count = 4; $Min_CPU = 0.4; $Default_Format = '5.2f'; $Default_Style = 'auto'; # The cache can cause a slight loss of sys time accuracy. If a # user does many tests (>10) with very large counts (>10000) # or works on a very slow machine the cache may be useful. disablecache(); clearallcache(); } sub debug { $Debug = ($_[1] != 0); } sub usage { my $calling_sub = (caller(1))[3]; $calling_sub =~ s/^Benchmark:://; return $_Usage{$calling_sub} \|\| ''; } # The cache needs two branches: 's' for strings and 'c' for code. The # empty loop is different in these two cases. $_Usage{clearcache} = <<'USAGE'; usage: clearcache($count); USAGE sub clearcache { die usage unless @_ == 1; delete $Cache{"$_[0]c"}; delete $Cache{"$_[0]s"}; } $_Usage{clearallcache} = <<'USAGE'; usage: clearallcache(); USAGE sub clearallcache { die usage if @_; %Cache = (); } $_Usage{enablecache} = <<'USAGE'; usage: enablecache(); USAGE sub enablecache { die usage if @_; $Do_Cache = 1; } $_Usage{disablecache} = <<'USAGE'; usage: disablecache(); USAGE sub disablecache { die usage if @_; $Do_Cache = 0; } # --- Functions to process the 'time' data type sub new { my @t = (mytime, times, @_ == 2 ? $_[1] : 0); print STDERR "new=@t\n" if $Debug; bless \@t; } sub cpu_p { my($r,$pu,$ps,$cu,$cs) = @{$_[0]}; $pu+$ps ; } sub cpu_c { my($r,$pu,$ps,$cu,$cs) = @{$_[0]}; $cu+$cs ; } sub cpu_a { my($r,$pu,$ps,$cu,$cs) = @{$_[0]}; $pu+$ps+$cu+$cs ; } sub real { my($r,$pu,$ps,$cu,$cs) = @{$_[0]}; $r ; } sub iters { $_[0]->[5] ; } # return the sum of various times: which ones depending on $style sub elapsed { my ($self, $style) = @_; $style = "" unless defined $style; return $self->cpu_c if $style eq 'nop'; return $self->cpu_p if $style eq 'noc'; return $self->cpu_a; } $_Usage{timediff} = <<'USAGE'; usage: $result_diff = timediff($result1, $result2); USAGE sub timediff { my($a, $b) = @_; die usage unless ref $a and ref $b; my @r; for (my $i=0; $i < @$a; ++$i) { push(@r, $a->[$i] - $b->[$i]); } #die "Bad timediff(): ($r[1] + $r[2]) <= 0 (@$a[1,2]\|@$b[1,2])\n" # if ($r[1] + $r[2]) < 0; bless \@r; } $_Usage{timesum} = <<'USAGE'; usage: $sum = timesum($result1, $result2); USAGE sub timesum { my($a, $b) = @_; die usage unless ref $a and ref $b; my @r; for (my $i=0; $i < @$a; ++$i) { push(@r, $a->[$i] + $b->[$i]); } bless \@r; } $_Usage{timestr} = <<'USAGE'; usage: $formatted_result = timestr($result1); USAGE sub timestr { my($tr, $style, $f) = @_; die usage unless ref $tr; my @t = @$tr; warn "bad time value (@t)" unless @t==6; my($r, $pu, $ps, $cu, $cs, $n) = @t; my($pt, $ct, $tt) = ($tr->cpu_p, $tr->cpu_c, $tr->cpu_a); $f = $Default_Format unless defined $f; # format a time in the required style, other formats may be added here $style \|\|= $Default_Style; return '' if $style eq 'none'; $style = ($ct>0) ? 'all' : 'noc' if $style eq 'auto'; my $s = "@t $style"; # default for unknown style my $w = $hirestime ? "%2g" : "%2d"; $s = sprintf("$w wallclock secs (%$f usr %$f sys + %$f cusr %$f csys = %$f CPU)", $r,$pu,$ps,$cu,$cs,$tt) if $style eq 'all'; $s = sprintf("$w wallclock secs (%$f usr + %$f sys = %$f CPU)", $r,$pu,$ps,$pt) if $style eq 'noc'; $s = sprintf("$w wallclock secs (%$f cusr + %$f csys = %$f CPU)", $r,$cu,$cs,$ct) if $style eq 'nop'; my $elapsed = $tr->elapsed($style); $s .= sprintf(" @ %$f/s (n=$n)",$n/($elapsed)) if $n && $elapsed; $s; } sub timedebug { my($msg, $t) = @_; print STDERR "$msg",timestr($t),"\n" if $Debug; } # --- Functions implementing low-level support for timing loops $_Usage{runloop} = <<'USAGE'; usage: runloop($number, [$string \| $coderef]) USAGE sub runloop { my($n, $c) = @_; $n+=0; # force numeric now, so garbage won't creep into the eval croak "negative loopcount $n" if $n<0; confess usage unless defined $c; my($t0, $t1, $td); # before, after, difference # find package of caller so we can execute code there my($curpack) = caller(0); my($i, $pack)= 0; while (($pack) = caller(++$i)) { last if $pack ne $curpack; } my ($subcode, $subref); if (ref $c eq 'CODE') { $subcode = "sub { for (1 .. $n) { local \$_; package $pack; &\$c; } }"; $subref = eval $subcode; } else { $subcode = "sub { for (1 .. $n) { local \$_; package $pack; $c;} }"; $subref = _doeval($subcode); } croak "runloop unable to compile '$c': $@\ncode: $subcode\n" if $@; print STDERR "runloop $n '$subcode'\n" if $Debug; # Wait for the user timer to tick. This makes the error range more like # -0.01, +0. If we don't wait, then it's more like -0.01, +0.01. This # may not seem important, but it significantly reduces the chances of # getting a too low initial $n in the initial, 'find the minimum' loop # in &countit. This, in turn, can reduce the number of calls to # &runloop a lot, and thus reduce additive errors. # # Note that its possible for the act of reading the system clock to # burn lots of system CPU while we burn very little user clock in the # busy loop, which can cause the loop to run for a very long wall time. # So gradually ramp up the duration of the loop. See RT #122003 # my $tbase = Benchmark->new(0)->[1]; my $limit = 1; while ( ( $t0 = Benchmark->new(0) )->[1] == $tbase ) { for (my $i=0; $i < $limit; $i++) { my $x = $i / 1.5 } # burn user CPU $limit = 1.1; } $subref->(); $t1 = Benchmark->new($n); $td = &timediff($t1, $t0); timedebug("runloop:",$td); $td; } $_Usage{timeit} = <<'USAGE'; usage: $result = timeit($count, 'code' ); or $result = timeit($count, sub { code } ); USAGE sub timeit { my($n, $code) = @_; my($wn, $wc, $wd); die usage unless defined $code and (!ref $code or ref $code eq 'CODE'); printf STDERR "timeit $n $code\n" if $Debug; my $cache_key = $n . ( ref( $code ) ? 'c' : 's' ); if ($Do_Cache && exists $Cache{$cache_key} ) { $wn = $Cache{$cache_key}; } else { $wn = &runloop($n, ref( $code ) ? sub { } : '' ); # Can't let our baseline have any iterations, or they get subtracted # out of the result. $wn->[5] = 0; $Cache{$cache_key} = $wn; } $wc = &runloop($n, $code); $wd = timediff($wc, $wn); timedebug("timeit: ",$wc); timedebug(" - ",$wn); timedebug(" = ",$wd); $wd; } my $default_for = 3; my $min_for = 0.1; $_Usage{countit} = <<'USAGE'; usage: $result = countit($time, 'code' ); or $result = countit($time, sub { code } ); USAGE sub countit { my ( $tmax, $code ) = @_; die usage unless @_; if ( not defined $tmax or $tmax == 0 ) { $tmax = $default_for; } elsif ( $tmax < 0 ) { $tmax = -$tmax; } die "countit($tmax, ...): timelimit cannot be less than $min_for.\n" if $tmax < $min_for; my ($n, $tc); # First find the minimum $n that gives a significant timing. my $zeros=0; for ($n = 1; ; $n = 2 ) { my $t0 = Benchmark->new(0); my $td = timeit($n, $code); my $t1 = Benchmark->new(0); $tc = $td->[1] + $td->[2]; if ( $tc <= 0 and $n > 1024 ) { my $d = timediff($t1, $t0); # note that $d is the total CPU time taken to call timeit(), # while $tc is is difference in CPU secs between the empty run # and the code run. If the code is trivial, its possible # for $d to get large while $tc is still zero (or slightly # negative). Bail out once timeit() starts taking more than a # few seconds without noticeable difference. if ($d->[1] + $d->[2] > 8 \|\| ++$zeros > 16) { die "Timing is consistently zero in estimation loop, cannot benchmark. N=$n\n"; } } else { $zeros = 0; } last if $tc > 0.1; } my $nmin = $n; # Get $n high enough that we can guess the final $n with some accuracy. my $tpra = 0.1 * $tmax; # Target/time practice. while ( $tc < $tpra ) { # The 5% fudge is to keep us from iterating again all # that often (this speeds overall responsiveness when $tmax is big # and we guess a little low). This does not noticeably affect # accuracy since we're not counting these times. $n = int( $tpra * 1.05 * $n / $tc ); # Linear approximation. my $td = timeit($n, $code); my $new_tc = $td->[1] + $td->[2]; # Make sure we are making progress. $tc = $new_tc > 1.2 * $tc ? $new_tc : 1.2 * $tc; } # Now, do the 'for real' timing(s), repeating until we exceed # the max. my $ntot = 0; my $rtot = 0; my $utot = 0.0; my $stot = 0.0; my $cutot = 0.0; my $cstot = 0.0; my $ttot = 0.0; # The 5% fudge is because $n is often a few % low even for routines # with stable times and avoiding extra timeit()s is nice for # accuracy's sake. $n = int( $n * ( 1.05 * $tmax / $tc ) ); $zeros=0; while () { my $td = timeit($n, $code); $ntot += $n; $rtot += $td->[0]; $utot += $td->[1]; $stot += $td->[2]; $cutot += $td->[3]; $cstot += $td->[4]; $ttot = $utot + $stot; last if $ttot >= $tmax; if ( $ttot <= 0 ) { ++$zeros > 16 and die "Timing is consistently zero, cannot benchmark. N=$n\n"; } else { $zeros = 0; } $ttot = 0.01 if $ttot < 0.01; my $r = $tmax / $ttot - 1; # Linear approximation. $n = int( $r * $ntot ); $n = $nmin if $n < $nmin; } return bless [ $rtot, $utot, $stot, $cutot, $cstot, $ntot ]; } # --- Functions implementing high-level time-then-print utilities sub n_to_for { my $n = shift; return $n == 0 ? $default_for : $n < 0 ? -$n : undef; } $_Usage{timethis} = <<'USAGE'; usage: $result = timethis($time, 'code' ); or $result = timethis($time, sub { code } ); USAGE sub timethis{ my($n, $code, $title, $style) = @_; my($t, $forn); die usage unless defined $code and (!ref $code or ref $code eq 'CODE'); if ( $n > 0 ) { croak "non-integer loopcount $n, stopped" if int($n)<$n; $t = timeit($n, $code); $title = "timethis $n" unless defined $title; } else { my $fort = n_to_for( $n ); $t = countit( $fort, $code ); $title = "timethis for $fort" unless defined $title; $forn = $t->[-1]; } local $\| = 1; $style = "" unless defined $style; printf("%10s: ", $title) unless $style eq 'none'; print timestr($t, $style, $Default_Format),"\n" unless $style eq 'none'; $n = $forn if defined $forn; if ($t->elapsed($style) < 0) { # due to clock granularity and variable CPU speed and load, # on quick code with a small number of loops, it's possible for # the empty loop to appear to take longer than the real loop # (e.g. 1 tick versus 0 ticks). This leads to a negative elapsed # time. In this case, floor it at zero, to stop bizarre results. print " (warning: too few iterations for a reliable count)\n"; $t->[$_] = 0 for 1..4; } # A conservative warning to spot very silly tests. # Don't assume that your benchmark is ok simply because # you don't get this warning! print " (warning: too few iterations for a reliable count)\n" if $n < $Min_Count \|\| ($t->real < 1 && $n < 1000) \|\| $t->cpu_a < $Min_CPU; $t; } $_Usage{timethese} = <<'USAGE'; usage: timethese($count, { Name1 => 'code1', ... }); or timethese($count, { Name1 => sub { code1 }, ... }); USAGE sub timethese{ my($n, $alt, $style) = @_; die usage unless ref $alt eq 'HASH'; my @names = sort keys %$alt; $style = "" unless defined $style; print "Benchmark: " unless $style eq 'none'; if ( $n > 0 ) { croak "non-integer loopcount $n, stopped" if int($n)<$n; print "timing $n iterations of" unless $style eq 'none'; } else { print "running" unless $style eq 'none'; } print " ", join(', ',@names) unless $style eq 'none'; unless ( $n > 0 ) { my $for = n_to_for( $n ); print ", each" if $n > 1 && $style ne 'none'; print " for at least $for CPU seconds" unless $style eq 'none'; } print "...\n" unless $style eq 'none'; # we could save the results in an array and produce a summary here # sum, min, max, avg etc etc my %results; foreach my $name (@names) { $results{$name} = timethis ($n, $alt -> {$name}, $name, $style); } return \%results; } $_Usage{cmpthese} = <<'USAGE'; usage: cmpthese($count, { Name1 => 'code1', ... }); or cmpthese($count, { Name1 => sub { code1 }, ... }); or cmpthese($result, $style); USAGE sub cmpthese{ my ($results, $style); # $count can be a blessed object. if ( ref $_[0] eq 'HASH' ) { ($results, $style) = @_; } else { my($count, $code) = @_[0,1]; $style = $_[2] if defined $_[2]; die usage unless ref $code eq 'HASH'; $results = timethese($count, $code, ($style \|\| "none")); } $style = "" unless defined $style; # Flatten in to an array of arrays with the name as the first field my @vals = map{ [ $_, @{$results->{$_}} ] } keys %$results; for (@vals) { # recreate the pre-flattened Benchmark object my $tmp_bm = bless [ @{$_}[1..$#$_] ]; my $elapsed = $tmp_bm->elapsed($style); # The epsilon fudge here is to prevent div by 0. Since clock # resolutions are much larger, it's below the noise floor. my $rate = $_->[6]/(($elapsed)+0.000000000000001); $_->[7] = $rate; } # Sort by rate @vals = sort { $a->[7] <=> $b->[7] } @vals; # If more than half of the rates are greater than one... my $display_as_rate = @vals ? ($vals[$#vals>>1]->[7] > 1) : 0; my @rows; my @col_widths; my @top_row = ( '', $display_as_rate ? 'Rate' : 's/iter', map { $_->[0] } @vals ); push @rows, \@top_row; @col_widths = map { length( $_ ) } @top_row; # Build the data rows # We leave the last column in even though it never has any data. Perhaps # it should go away. Also, perhaps a style for a single column of # percentages might be nice. for my $row_val ( @vals ) { my @row; # Column 0 = test name push @row, $row_val->[0]; $col_widths[0] = length( $row_val->[0] ) if length( $row_val->[0] ) > $col_widths[0]; # Column 1 = performance my $row_rate = $row_val->[7]; # We assume that we'll never get a 0 rate. my $rate = $display_as_rate ? $row_rate : 1 / $row_rate; # Only give a few decimal places before switching to sci. notation, # since the results aren't usually that accurate anyway. my $format = $rate >= 100 ? "%0.0f" : $rate >= 10 ? "%0.1f" : $rate >= 1 ? "%0.2f" : $rate >= 0.1 ? "%0.3f" : "%0.2e"; $format .= "/s" if $display_as_rate; my $formatted_rate = sprintf( $format, $rate ); push @row, $formatted_rate; $col_widths[1] = length( $formatted_rate ) if length( $formatted_rate ) > $col_widths[1]; # Columns 2..N = performance ratios my $skip_rest = 0; for ( my $col_num = 0 ; $col_num < @vals ; ++$col_num ) { my $col_val = $vals[$col_num]; my $out; if ( $skip_rest ) { $out = ''; } elsif ( $col_val->[0] eq $row_val->[0] ) { $out = "--"; # $skip_rest = 1; } else { my $col_rate = $col_val->[7]; $out = sprintf( "%.0f%%", 100*$row_rate/$col_rate - 100 ); } push @row, $out; $col_widths[$col_num+2] = length( $out ) if length( $out ) > $col_widths[$col_num+2]; # A little weirdness to set the first column width properly $col_widths[$col_num+2] = length( $col_val->[0] ) if length( $col_val->[0] ) > $col_widths[$col_num+2]; } push @rows, \@row; } return \@rows if $style eq "none"; # Equalize column widths in the chart as much as possible without # exceeding 80 characters. This does not use or affect cols 0 or 1. my @sorted_width_refs = sort { $$a <=> $$b } map { \$_ } @col_widths[2..$#col_widths]; my $max_width = ${$sorted_width_refs[-1]}; my $total = @col_widths - 1 ; for ( @col_widths ) { $total += $_ } STRETCHER: while ( $total < 80 ) { my $min_width = ${$sorted_width_refs[0]}; last if $min_width == $max_width; for ( @sorted_width_refs ) { last if $$_ > $min_width; ++$$_; ++$total; last STRETCHER if $total >= 80; } } # Dump the output my $format = join( ' ', map { "%${_}s" } @col_widths ) . "\n"; substr( $format, 1, 0 ) = '-'; for ( @rows ) { printf $format, @$_; } return \@rows ; } 1; Back

Edit File : Benchmark.pm | Size : 30.30 KB

package Benchmark;

use strict;

=head1 NAME

Benchmark - benchmark running times of Perl code

=head1 SYNOPSIS

use Benchmark qw(:all) ;

timethis ($count, "code");

# Use Perl code in strings...
    timethese($count, {
	'Name1' => '...code1...',
	'Name2' => '...code2...',
    });

# ... or use subroutine references.
    timethese($count, {
	'Name1' => sub { ...code1... },
	'Name2' => sub { ...code2... },
    });

# cmpthese can be used both ways as well
    cmpthese($count, {
	'Name1' => '...code1...',
	'Name2' => '...code2...',
    });

cmpthese($count, {
	'Name1' => sub { ...code1... },
	'Name2' => sub { ...code2... },
    });

# ...or in two stages
    $results = timethese($count,
        {
	    'Name1' => sub { ...code1... },
	    'Name2' => sub { ...code2... },
        },
	'none'
    );
    cmpthese( $results ) ;

$t = timeit($count, '...other code...')
    print "$count loops of other code took:",timestr($t),"\n";

$t = countit($time, '...other code...')
    $count = $t->iters ;
    print "$count loops of other code took:",timestr($t),"\n";

# enable hires wallclock timing if possible
    use Benchmark ':hireswallclock';

=head1 DESCRIPTION

The Benchmark module encapsulates a number of routines to help you
figure out how long it takes to execute some code.

timethis - run a chunk of code several times

timethese - run several chunks of code several times

cmpthese - print results of timethese as a comparison chart

timeit - run a chunk of code and see how long it goes

countit - see how many times a chunk of code runs in a given time

=head2 Methods

=over 10

=item new

Returns the current time.   Example:

use Benchmark;
    $t0 = Benchmark->new;
    # ... your code here ...
    $t1 = Benchmark->new;
    $td = timediff($t1, $t0);
    print "the code took:",timestr($td),"\n";

=item debug

Enables or disable debugging by setting the C<$Benchmark::Debug> flag:

Benchmark->debug(1);
    $t = timeit(10, ' 5 ** $Global ');
    Benchmark->debug(0);

=item iters

Returns the number of iterations.

=back

=head2 Standard Exports

The following routines will be exported into your namespace
if you use the Benchmark module:

=over 10

=item timeit(COUNT, CODE)

Arguments: COUNT is the number of times to run the loop, and CODE is
the code to run.  CODE may be either a code reference or a string to
be eval'd; either way it will be run in the caller's package.

Returns: a Benchmark object.

=item timethis ( COUNT, CODE, [ TITLE, [ STYLE ]] )

Time COUNT iterations of CODE. CODE may be a string to eval or a
code reference; either way the CODE will run in the caller's package.
Results will be printed to STDOUT as TITLE followed by the times.
TITLE defaults to "timethis COUNT" if none is provided. STYLE
determines the format of the output, as described for timestr() below.

The COUNT can be zero or negative: this means the I<minimum number of
CPU seconds> to run.  A zero signifies the default of 3 seconds.  For
example to run at least for 10 seconds:

timethis(-10, $code)

or to run two pieces of code tests for at least 3 seconds:

timethese(0, { test1 => '...', test2 => '...'})

CPU seconds is, in UNIX terms, the user time plus the system time of
the process itself, as opposed to the real (wallclock) time and the
time spent by the child processes.  Less than 0.1 seconds is not
accepted (-0.01 as the count, for example, will cause a fatal runtime
exception).

Note that the CPU seconds is the B<minimum> time: CPU scheduling and
other operating system factors may complicate the attempt so that a
little bit more time is spent.  The benchmark output will, however,
also tell the number of C<$code> runs/second, which should be a more
interesting number than the actually spent seconds.

Returns a Benchmark object.

=item timethese ( COUNT, CODEHASHREF, [ STYLE ] )

The CODEHASHREF is a reference to a hash containing names as keys
and either a string to eval or a code reference for each value.
For each (KEY, VALUE) pair in the CODEHASHREF, this routine will
call

timethis(COUNT, VALUE, KEY, STYLE)

The routines are called in string comparison order of KEY.

The COUNT can be zero or negative, see timethis().

Returns a hash reference of Benchmark objects, keyed by name.

=item timediff ( T1, T2 )

Returns the difference between two Benchmark times as a Benchmark
object suitable for passing to timestr().

=item timestr ( TIMEDIFF, [ STYLE, [ FORMAT ] ] )

Returns a string that formats the times in the TIMEDIFF object in
the requested STYLE. TIMEDIFF is expected to be a Benchmark object
similar to that returned by timediff().

STYLE can be any of 'all', 'none', 'noc', 'nop' or 'auto'. 'all' shows
each of the 5 times available ('wallclock' time, user time, system time,
user time of children, and system time of children). 'noc' shows all
except the two children times. 'nop' shows only wallclock and the
two children times. 'auto' (the default) will act as 'all' unless
the children times are both zero, in which case it acts as 'noc'.
'none' prevents output.

FORMAT is the L<printf(3)>-style format specifier (without the
leading '%') to use to print the times. It defaults to '5.2f'.

=back

=head2 Optional Exports

The following routines will be exported into your namespace
if you specifically ask that they be imported:

=over 10

=item clearcache ( COUNT )

Clear the cached time for COUNT rounds of the null loop.

=item clearallcache ( )

Clear all cached times.

=item cmpthese ( COUNT, CODEHASHREF, [ STYLE ] )

=item cmpthese ( RESULTSHASHREF, [ STYLE ] )

Optionally calls timethese(), then outputs comparison chart.  This:

cmpthese( -1, { a => "++\$i", b => "\$i *= 2" } ) ;

outputs a chart like:

Rate    b    a
    b 2831802/s   -- -61%
    a 7208959/s 155%   --

This chart is sorted from slowest to fastest, and shows the percent speed
difference between each pair of tests.

C<cmpthese> can also be passed the data structure that timethese() returns:

$results = timethese( -1,
        { a => "++\$i", b => "\$i *= 2" } ) ;
    cmpthese( $results );

in case you want to see both sets of results.
If the first argument is an unblessed hash reference,
that is RESULTSHASHREF; otherwise that is COUNT.

Returns a reference to an ARRAY of rows, each row is an ARRAY of cells from the
above chart, including labels. This:

my $rows = cmpthese( -1,
        { a => '++$i', b => '$i *= 2' }, "none" );

returns a data structure like:

[
        [ '',       'Rate',   'b',    'a' ],
        [ 'b', '2885232/s',  '--', '-59%' ],
        [ 'a', '7099126/s', '146%',  '--' ],
    ]

B<NOTE>: This result value differs from previous versions, which returned
the C<timethese()> result structure.  If you want that, just use the two
statement C<timethese>...C<cmpthese> idiom shown above.

Incidentally, note the variance in the result values between the two examples;
this is typical of benchmarking.  If this were a real benchmark, you would
probably want to run a lot more iterations.

=item countit(TIME, CODE)

Arguments: TIME is the minimum length of time to run CODE for, and CODE is
the code to run.  CODE may be either a code reference or a string to
be eval'd; either way it will be run in the caller's package.

TIME is I<not> negative.  countit() will run the loop many times to
calculate the speed of CODE before running it for TIME.  The actual
time run for will usually be greater than TIME due to system clock
resolution, so it's best to look at the number of iterations divided
by the times that you are concerned with, not just the iterations.

Returns: a Benchmark object.

=item disablecache ( )

Disable caching of timings for the null loop. This will force Benchmark
to recalculate these timings for each new piece of code timed.

=item enablecache ( )

Enable caching of timings for the null loop. The time taken for COUNT
rounds of the null loop will be calculated only once for each
different COUNT used.

=item timesum ( T1, T2 )

Returns the sum of two Benchmark times as a Benchmark object suitable
for passing to timestr().

=back

=head2 :hireswallclock

If the Time::HiRes module has been installed, you can specify the
special tag C<:hireswallclock> for Benchmark (if Time::HiRes is not
available, the tag will be silently ignored).  This tag will cause the
wallclock time to be measured in microseconds, instead of integer
seconds.  Note though that the speed computations are still conducted
in CPU time, not wallclock time.

=head1 Benchmark Object

Many of the functions in this module return a Benchmark object,
or in the case of C<timethese()>, a reference to a hash, the values of
which are Benchmark objects.  This is useful if you want to store or
further process results from Benchmark functions.

Internally the Benchmark object holds timing values,
described in L</"NOTES"> below.
The following methods can be used to access them:

=over 4

=item cpu_p

Total CPU (User + System) of the main (parent) process.

=item cpu_c

Total CPU (User + System) of any children processes.

=item cpu_a

Total CPU of parent and any children processes.

=item real

Real elapsed time "wallclock seconds".

=item iters

Number of iterations run.

=back

The following illustrates use of the Benchmark object:

$result = timethis(100000, sub { ... });
    print "total CPU = ", $result->cpu_a, "\n";

=head1 NOTES

The data is stored as a list of values from the time and times
functions:

($real, $user, $system, $children_user, $children_system, $iters)

in seconds for the whole loop (not divided by the number of rounds).

The timing is done using time(3) and times(3).

Code is executed in the caller's package.

The time of the null loop (a loop with the same
number of rounds but empty loop body) is subtracted
from the time of the real loop.

The null loop times can be cached, the key being the
number of rounds. The caching can be controlled using
calls like these:

clearcache($key);
    clearallcache();

disablecache();
    enablecache();

Caching is off by default, as it can (usually slightly) decrease
accuracy and does not usually noticeably affect runtimes.

=head1 EXAMPLES

For example,

use Benchmark qw( cmpthese ) ;
    $x = 3;
    cmpthese( -5, {
        a => sub{$x*$x},
        b => sub{$x**2},
    } );

outputs something like this:

Benchmark: running a, b, each for at least 5 CPU seconds...
          Rate    b    a
   b 1559428/s   -- -62%
   a 4152037/s 166%   --

while

use Benchmark qw( timethese cmpthese ) ;
    $x = 3;
    $r = timethese( -5, {
        a => sub{$x*$x},
        b => sub{$x**2},
    } );
    cmpthese $r;

outputs something like this:

Benchmark: running a, b, each for at least 5 CPU seconds...
             a: 10 wallclock secs ( 5.14 usr +  0.13 sys =  5.27 CPU) @ 3835055.60/s (n=20210743)
             b:  5 wallclock secs ( 5.41 usr +  0.00 sys =  5.41 CPU) @ 1574944.92/s (n=8520452)
           Rate    b    a
    b 1574945/s   -- -59%
    a 3835056/s 144%   --

=head1 INHERITANCE

Benchmark inherits from no other class, except of course
from Exporter.

=head1 CAVEATS

Comparing eval'd strings with code references will give you
inaccurate results: a code reference will show a slightly slower
execution time than the equivalent eval'd string.

The real time timing is done using time(2) and
the granularity is therefore only one second.

Short tests may produce negative figures because perl
can appear to take longer to execute the empty loop
than a short test; try:

timethis(100,'1');

The system time of the null loop might be slightly
more than the system time of the loop with the actual
code and therefore the difference might end up being E<lt> 0.

=head1 SEE ALSO

L<Devel::NYTProf> - a Perl code profiler

=head1 AUTHORS

Jarkko Hietaniemi <F<jhi@iki.fi>>, Tim Bunce <F<Tim.Bunce@ig.co.uk>>

=head1 MODIFICATION HISTORY

September 8th, 1994; by Tim Bunce.

March 28th, 1997; by Hugo van der Sanden: added support for code
references and the already documented 'debug' method; revamped
documentation.

April 04-07th, 1997: by Jarkko Hietaniemi, added the run-for-some-time
functionality.

September, 1999; by Barrie Slaymaker: math fixes and accuracy and
efficiency tweaks.  Added cmpthese().  A result is now returned from
timethese().  Exposed countit() (was runfor()).

December, 2001; by Nicholas Clark: make timestr() recognise the style 'none'
and return an empty string. If cmpthese is calling timethese, make it pass the
style in. (so that 'none' will suppress output). Make sub new dump its
debugging output to STDERR, to be consistent with everything else.
All bugs found while writing a regression test.

September, 2002; by Jarkko Hietaniemi: add ':hireswallclock' special tag.

February, 2004; by Chia-liang Kao: make cmpthese and timestr use time
statistics for children instead of parent when the style is 'nop'.

November, 2007; by Christophe Grosjean: make cmpthese and timestr compute
time consistently with style argument, default is 'all' not 'noc' any more.

=cut

# evaluate something in a clean lexical environment
sub _doeval { no strict;  eval shift }

#
# put any lexicals at file scope AFTER here
#

use Carp;
use Exporter;

our(@ISA, @EXPORT, @EXPORT_OK, %EXPORT_TAGS, $VERSION);

@ISA=qw(Exporter);
@EXPORT=qw(timeit timethis timethese timediff timestr);
@EXPORT_OK=qw(timesum cmpthese countit
	      clearcache clearallcache disablecache enablecache);
%EXPORT_TAGS=( all => [ @EXPORT, @EXPORT_OK ] ) ;

$VERSION = 1.22;

# --- ':hireswallclock' special handling

my $hirestime;

sub mytime () { time }

init();

sub BEGIN {
    if (eval 'require Time::HiRes') {
	import Time::HiRes qw(time);
	$hirestime = \&Time::HiRes::time;
    }
}

sub import {
    my $class = shift;
    if (grep { $_ eq ":hireswallclock" } @_) {
	@_ = grep { $_ ne ":hireswallclock" } @_;
	local $^W=0;
	*mytime = $hirestime if defined $hirestime;
    }
    Benchmark->export_to_level(1, $class, @_);
}

our($Debug, $Min_Count, $Min_CPU, $Default_Format, $Default_Style,
    %_Usage, %Cache, $Do_Cache);

sub init {
    $Debug = 0;
    $Min_Count = 4;
    $Min_CPU   = 0.4;
    $Default_Format = '5.2f';
    $Default_Style = 'auto';
    # The cache can cause a slight loss of sys time accuracy. If a
    # user does many tests (>10) with *very* large counts (>10000)
    # or works on a very slow machine the cache may be useful.
    disablecache();
    clearallcache();
}

sub debug { $Debug = ($_[1] != 0); }

sub usage {
    my $calling_sub = (caller(1))[3];
    $calling_sub =~ s/^Benchmark:://;
    return $_Usage{$calling_sub} || '';
}

# The cache needs two branches: 's' for strings and 'c' for code.  The
# empty loop is different in these two cases.

$_Usage{clearcache} = <<'USAGE';
usage: clearcache($count);
USAGE

sub clearcache    {
    die usage unless @_ == 1;
    delete $Cache{"$_[0]c"}; delete $Cache{"$_[0]s"};
}

$_Usage{clearallcache} = <<'USAGE';
usage: clearallcache();
USAGE

sub clearallcache {
    die usage if @_;
    %Cache = ();
}

$_Usage{enablecache} = <<'USAGE';
usage: enablecache();
USAGE

sub enablecache   {
    die usage if @_;
    $Do_Cache = 1;
}

$_Usage{disablecache} = <<'USAGE';
usage: disablecache();
USAGE

sub disablecache  {
    die usage if @_;
    $Do_Cache = 0;
}

# --- Functions to process the 'time' data type

sub new { my @t = (mytime, times, @_ == 2 ? $_[1] : 0);
	  print STDERR "new=@t\n" if $Debug;
	  bless \@t; }

sub cpu_p { my($r,$pu,$ps,$cu,$cs) = @{$_[0]}; $pu+$ps         ; }
sub cpu_c { my($r,$pu,$ps,$cu,$cs) = @{$_[0]};         $cu+$cs ; }
sub cpu_a { my($r,$pu,$ps,$cu,$cs) = @{$_[0]}; $pu+$ps+$cu+$cs ; }
sub real  { my($r,$pu,$ps,$cu,$cs) = @{$_[0]}; $r              ; }
sub iters { $_[0]->[5] ; }

# return the sum of various times: which ones depending on $style

sub elapsed {
    my ($self, $style) = @_;
    $style = "" unless defined $style;

return $self->cpu_c if $style eq 'nop';
    return $self->cpu_p if $style eq 'noc';
    return $self->cpu_a;
}

$_Usage{timediff} = <<'USAGE';
usage: $result_diff = timediff($result1, $result2);
USAGE

sub timediff {
    my($a, $b) = @_;

die usage unless ref $a and ref $b;

my @r;
    for (my $i=0; $i < @$a; ++$i) {
	push(@r, $a->[$i] - $b->[$i]);
    }
    #die "Bad timediff(): ($r[1] + $r[2]) <= 0 (@$a[1,2]|@$b[1,2])\n"
    #        if ($r[1] + $r[2]) < 0;
    bless \@r;
}

$_Usage{timesum} = <<'USAGE';
usage: $sum = timesum($result1, $result2);
USAGE

sub timesum {
    my($a, $b) = @_;

die usage unless ref $a and ref $b;

my @r;
    for (my $i=0; $i < @$a; ++$i) {
 	push(@r, $a->[$i] + $b->[$i]);
    }
    bless \@r;
}

$_Usage{timestr} = <<'USAGE';
usage: $formatted_result = timestr($result1);
USAGE

sub timestr {
    my($tr, $style, $f) = @_;

die usage unless ref $tr;

my @t = @$tr;
    warn "bad time value (@t)" unless @t==6;
    my($r, $pu, $ps, $cu, $cs, $n) = @t;
    my($pt, $ct, $tt) = ($tr->cpu_p, $tr->cpu_c, $tr->cpu_a);
    $f = $Default_Format unless defined $f;
    # format a time in the required style, other formats may be added here
    $style ||= $Default_Style;
    return '' if $style eq 'none';
    $style = ($ct>0) ? 'all' : 'noc' if $style eq 'auto';
    my $s = "@t $style"; # default for unknown style
    my $w = $hirestime ? "%2g" : "%2d";
    $s = sprintf("$w wallclock secs (%$f usr %$f sys + %$f cusr %$f csys = %$f CPU)",
			    $r,$pu,$ps,$cu,$cs,$tt) if $style eq 'all';
    $s = sprintf("$w wallclock secs (%$f usr + %$f sys = %$f CPU)",
			    $r,$pu,$ps,$pt) if $style eq 'noc';
    $s = sprintf("$w wallclock secs (%$f cusr + %$f csys = %$f CPU)",
			    $r,$cu,$cs,$ct) if $style eq 'nop';
    my $elapsed = $tr->elapsed($style);
    $s .= sprintf(" @ %$f/s (n=$n)",$n/($elapsed)) if $n && $elapsed;
    $s;
}

sub timedebug {
    my($msg, $t) = @_;
    print STDERR "$msg",timestr($t),"\n" if $Debug;
}

# --- Functions implementing low-level support for timing loops

$_Usage{runloop} = <<'USAGE';
usage: runloop($number, [$string | $coderef])
USAGE

sub runloop {
    my($n, $c) = @_;

$n+=0; # force numeric now, so garbage won't creep into the eval
    croak "negative loopcount $n" if $n<0;
    confess usage unless defined $c;
    my($t0, $t1, $td); # before, after, difference

# find package of caller so we can execute code there
    my($curpack) = caller(0);
    my($i, $pack)= 0;
    while (($pack) = caller(++$i)) {
	last if $pack ne $curpack;
    }

my ($subcode, $subref);
    if (ref $c eq 'CODE') {
	$subcode = "sub { for (1 .. $n) { local \$_; package $pack; &\$c; } }";
        $subref  = eval $subcode;
    }
    else {
	$subcode = "sub { for (1 .. $n) { local \$_; package $pack; $c;} }";
        $subref  = _doeval($subcode);
    }
    croak "runloop unable to compile '$c': $@\ncode: $subcode\n" if $@;
    print STDERR "runloop $n '$subcode'\n" if $Debug;

# Wait for the user timer to tick.  This makes the error range more like
    # -0.01, +0.  If we don't wait, then it's more like -0.01, +0.01.  This
    # may not seem important, but it significantly reduces the chances of
    # getting a too low initial $n in the initial, 'find the minimum' loop
    # in &countit.  This, in turn, can reduce the number of calls to
    # &runloop a lot, and thus reduce additive errors.
    #
    # Note that its possible for the act of reading the system clock to
    # burn lots of system CPU while we burn very little user clock in the
    # busy loop, which can cause the loop to run for a very long wall time.
    # So gradually ramp up the duration of the loop. See RT #122003
    #
    my $tbase = Benchmark->new(0)->[1];
    my $limit = 1;
    while ( ( $t0 = Benchmark->new(0) )->[1] == $tbase ) {
        for (my $i=0; $i < $limit; $i++) { my $x = $i / 1.5 } # burn user CPU
        $limit *= 1.1;
    }
    $subref->();
    $t1 = Benchmark->new($n);
    $td = &timediff($t1, $t0);
    timedebug("runloop:",$td);
    $td;
}

$_Usage{timeit} = <<'USAGE';
usage: $result = timeit($count, 'code' );        or
       $result = timeit($count, sub { code } );
USAGE

sub timeit {
    my($n, $code) = @_;
    my($wn, $wc, $wd);

die usage unless defined $code and
                     (!ref $code or ref $code eq 'CODE');

printf STDERR "timeit $n $code\n" if $Debug;
    my $cache_key = $n . ( ref( $code ) ? 'c' : 's' );
    if ($Do_Cache && exists $Cache{$cache_key} ) {
	$wn = $Cache{$cache_key};
    } else {
	$wn = &runloop($n, ref( $code ) ? sub { } : '' );
	# Can't let our baseline have any iterations, or they get subtracted
	# out of the result.
	$wn->[5] = 0;
	$Cache{$cache_key} = $wn;
    }

$wc = &runloop($n, $code);

$wd = timediff($wc, $wn);
    timedebug("timeit: ",$wc);
    timedebug("      - ",$wn);
    timedebug("      = ",$wd);

$wd;
}

my $default_for = 3;
my $min_for     = 0.1;

$_Usage{countit} = <<'USAGE';
usage: $result = countit($time, 'code' );        or
       $result = countit($time, sub { code } );
USAGE

sub countit {
    my ( $tmax, $code ) = @_;

die usage unless @_;

if ( not defined $tmax or $tmax == 0 ) {
	$tmax = $default_for;
    } elsif ( $tmax < 0 ) {
	$tmax = -$tmax;
    }

die "countit($tmax, ...): timelimit cannot be less than $min_for.\n"
	if $tmax < $min_for;

my ($n, $tc);

# First find the minimum $n that gives a significant timing.
    my $zeros=0;
    for ($n = 1; ; $n *= 2 ) {
	my $t0 = Benchmark->new(0);
	my $td = timeit($n, $code);
	my $t1 = Benchmark->new(0);
	$tc = $td->[1] + $td->[2];
	if ( $tc <= 0 and $n > 1024 ) {
	    my $d = timediff($t1, $t0);
	    # note that $d is the total CPU time taken to call timeit(),
	    # while $tc is is difference in CPU secs between the empty run
	    # and the code run. If the code is trivial, its possible
	    # for $d to get large while $tc is still zero (or slightly
	    # negative). Bail out once timeit() starts taking more than a
	    # few seconds without noticeable difference.
	    if ($d->[1] + $d->[2] > 8
		|| ++$zeros > 16)
	    {
	        die "Timing is consistently zero in estimation loop, cannot benchmark. N=$n\n";
            }
	} else {
	    $zeros = 0;
	}
	last if $tc > 0.1;
    }

my $nmin = $n;

# Get $n high enough that we can guess the final $n with some accuracy.
    my $tpra = 0.1 * $tmax; # Target/time practice.
    while ( $tc < $tpra ) {
	# The 5% fudge is to keep us from iterating again all
	# that often (this speeds overall responsiveness when $tmax is big
	# and we guess a little low).  This does not noticeably affect
	# accuracy since we're not counting these times.
	$n = int( $tpra * 1.05 * $n / $tc ); # Linear approximation.
	my $td = timeit($n, $code);
	my $new_tc = $td->[1] + $td->[2];
        # Make sure we are making progress.
        $tc = $new_tc > 1.2 * $tc ? $new_tc : 1.2 * $tc;
    }

# Now, do the 'for real' timing(s), repeating until we exceed
    # the max.
    my $ntot  = 0;
    my $rtot  = 0;
    my $utot  = 0.0;
    my $stot  = 0.0;
    my $cutot = 0.0;
    my $cstot = 0.0;
    my $ttot  = 0.0;

# The 5% fudge is because $n is often a few % low even for routines
    # with stable times and avoiding extra timeit()s is nice for
    # accuracy's sake.
    $n = int( $n * ( 1.05 * $tmax / $tc ) );
    $zeros=0;
    while () {
	my $td = timeit($n, $code);
	$ntot  += $n;
	$rtot  += $td->[0];
	$utot  += $td->[1];
	$stot  += $td->[2];
	$cutot += $td->[3];
	$cstot += $td->[4];
	$ttot = $utot + $stot;
	last if $ttot >= $tmax;
	if ( $ttot <= 0 ) {
	    ++$zeros > 16
	        and die "Timing is consistently zero, cannot benchmark. N=$n\n";
	} else {
	    $zeros = 0;
	}
        $ttot = 0.01 if $ttot < 0.01;
	my $r = $tmax / $ttot - 1; # Linear approximation.
	$n = int( $r * $ntot );
	$n = $nmin if $n < $nmin;
    }

return bless [ $rtot, $utot, $stot, $cutot, $cstot, $ntot ];
}

# --- Functions implementing high-level time-then-print utilities

sub n_to_for {
    my $n = shift;
    return $n == 0 ? $default_for : $n < 0 ? -$n : undef;
}

$_Usage{timethis} = <<'USAGE';
usage: $result = timethis($time, 'code' );        or
       $result = timethis($time, sub { code } );
USAGE

sub timethis{
    my($n, $code, $title, $style) = @_;
    my($t, $forn);

die usage unless defined $code and
                     (!ref $code or ref $code eq 'CODE');

if ( $n > 0 ) {
	croak "non-integer loopcount $n, stopped" if int($n)<$n;
	$t = timeit($n, $code);
	$title = "timethis $n" unless defined $title;
    } else {
	my $fort  = n_to_for( $n );
	$t     = countit( $fort, $code );
	$title = "timethis for $fort" unless defined $title;
	$forn  = $t->[-1];
    }
    local $| = 1;
    $style = "" unless defined $style;
    printf("%10s: ", $title) unless $style eq 'none';
    print timestr($t, $style, $Default_Format),"\n" unless $style eq 'none';

$n = $forn if defined $forn;

if ($t->elapsed($style) < 0) {
        # due to clock granularity and variable CPU speed and load,
        # on quick code with a small number of loops, it's possible for
        # the empty loop to appear to take longer than the real loop
        # (e.g. 1 tick versus 0 ticks). This leads to a negative elapsed
        # time. In this case, floor it at zero, to stop bizarre results.
        print "            (warning: too few iterations for a reliable count)\n";
        $t->[$_] = 0 for 1..4;
    }

# A conservative warning to spot very silly tests.
    # Don't assume that your benchmark is ok simply because
    # you don't get this warning!
    print "            (warning: too few iterations for a reliable count)\n"
	if     $n < $Min_Count
	    || ($t->real < 1 && $n < 1000)
	    || $t->cpu_a < $Min_CPU;
    $t;
}

$_Usage{timethese} = <<'USAGE';
usage: timethese($count, { Name1 => 'code1', ... });        or
       timethese($count, { Name1 => sub { code1 }, ... });
USAGE

sub timethese{
    my($n, $alt, $style) = @_;
    die usage unless ref $alt eq 'HASH';

my @names = sort keys %$alt;
    $style = "" unless defined $style;
    print "Benchmark: " unless $style eq 'none';
    if ( $n > 0 ) {
	croak "non-integer loopcount $n, stopped" if int($n)<$n;
	print "timing $n iterations of" unless $style eq 'none';
    } else {
	print "running" unless $style eq 'none';
    }
    print " ", join(', ',@names) unless $style eq 'none';
    unless ( $n > 0 ) {
	my $for = n_to_for( $n );
	print ", each" if $n > 1 && $style ne 'none';
	print " for at least $for CPU seconds" unless $style eq 'none';
    }
    print "...\n" unless $style eq 'none';

# we could save the results in an array and produce a summary here
    # sum, min, max, avg etc etc
    my %results;
    foreach my $name (@names) {
        $results{$name} = timethis ($n, $alt -> {$name}, $name, $style);
    }

return \%results;
}

$_Usage{cmpthese} = <<'USAGE';
usage: cmpthese($count, { Name1 => 'code1', ... });        or
       cmpthese($count, { Name1 => sub { code1 }, ... });  or
       cmpthese($result, $style);
USAGE

sub cmpthese{
    my ($results, $style);

# $count can be a blessed object.
    if ( ref $_[0] eq 'HASH' ) {
        ($results, $style) = @_;
    }
    else {
        my($count, $code) = @_[0,1];
        $style = $_[2] if defined $_[2];

die usage unless ref $code eq 'HASH';

$results = timethese($count, $code, ($style || "none"));
    }

$style = "" unless defined $style;

# Flatten in to an array of arrays with the name as the first field
    my @vals = map{ [ $_, @{$results->{$_}} ] } keys %$results;

for (@vals) {
        # recreate the pre-flattened Benchmark object
        my $tmp_bm = bless [ @{$_}[1..$#$_] ];
	my $elapsed = $tmp_bm->elapsed($style);
	# The epsilon fudge here is to prevent div by 0.  Since clock
	# resolutions are much larger, it's below the noise floor.
	my $rate = $_->[6]/(($elapsed)+0.000000000000001);
	$_->[7] = $rate;
    }

# Sort by rate
    @vals = sort { $a->[7] <=> $b->[7] } @vals;

# If more than half of the rates are greater than one...
    my $display_as_rate = @vals ? ($vals[$#vals>>1]->[7] > 1) : 0;

my @rows;
    my @col_widths;

my @top_row = (
        '',
	$display_as_rate ? 'Rate' : 's/iter',
	map { $_->[0] } @vals
    );

push @rows, \@top_row;
    @col_widths = map { length( $_ ) } @top_row;

# Build the data rows
    # We leave the last column in even though it never has any data.  Perhaps
    # it should go away.  Also, perhaps a style for a single column of
    # percentages might be nice.
    for my $row_val ( @vals ) {
	my @row;

# Column 0 = test name
	push @row, $row_val->[0];
	$col_widths[0] = length( $row_val->[0] )
	    if length( $row_val->[0] ) > $col_widths[0];

# Column 1 = performance
	my $row_rate = $row_val->[7];

# We assume that we'll never get a 0 rate.
	my $rate = $display_as_rate ? $row_rate : 1 / $row_rate;

# Only give a few decimal places before switching to sci. notation,
	# since the results aren't usually that accurate anyway.
	my $format =
	   $rate >= 100 ?
	       "%0.0f" :
	   $rate >= 10 ?
	       "%0.1f" :
	   $rate >= 1 ?
	       "%0.2f" :
	   $rate >= 0.1 ?
	       "%0.3f" :
	       "%0.2e";

$format .= "/s"
	    if $display_as_rate;

my $formatted_rate = sprintf( $format, $rate );
	push @row, $formatted_rate;
	$col_widths[1] = length( $formatted_rate )
	    if length( $formatted_rate ) > $col_widths[1];

# Columns 2..N = performance ratios
	my $skip_rest = 0;
	for ( my $col_num = 0 ; $col_num < @vals ; ++$col_num ) {
	    my $col_val = $vals[$col_num];
	    my $out;
	    if ( $skip_rest ) {
		$out = '';
	    }
	    elsif ( $col_val->[0] eq $row_val->[0] ) {
		$out = "--";
		# $skip_rest = 1;
	    }
	    else {
		my $col_rate = $col_val->[7];
		$out = sprintf( "%.0f%%", 100*$row_rate/$col_rate - 100 );
	    }
	    push @row, $out;
	    $col_widths[$col_num+2] = length( $out )
		if length( $out ) > $col_widths[$col_num+2];

# A little weirdness to set the first column width properly
	    $col_widths[$col_num+2] = length( $col_val->[0] )
		if length( $col_val->[0] ) > $col_widths[$col_num+2];
	}
	push @rows, \@row;
    }

return \@rows if $style eq "none";

# Equalize column widths in the chart as much as possible without
    # exceeding 80 characters.  This does not use or affect cols 0 or 1.
    my @sorted_width_refs =
       sort { $$a <=> $$b } map { \$_ } @col_widths[2..$#col_widths];
    my $max_width = ${$sorted_width_refs[-1]};

my $total = @col_widths - 1 ;
    for ( @col_widths ) { $total += $_ }

STRETCHER:
    while ( $total < 80 ) {
	my $min_width = ${$sorted_width_refs[0]};
	last
	   if $min_width == $max_width;
	for ( @sorted_width_refs ) {
	    last
		if $$_ > $min_width;
	    ++$$_;
	    ++$total;
	    last STRETCHER
		if $total >= 80;
	}
    }

# Dump the output
    my $format = join( ' ', map { "%${_}s" } @col_widths ) . "\n";
    substr( $format, 1, 0 ) = '-';
    for ( @rows ) {
	printf $format, @$_;
    }

return \@rows ;
}

Back