#$@%#$%!

Ngiler SH3LL 360
: / opt / cpanel / ea-openssl11 / include / openssl /

Information Server
MySQL : OFF Perl : OFF CURL : ON WGET : OFF PKEXEC : OFF

Directive	Local Value
IP Address	162.0.209.101
System	Linux premium169.web-hosting.com 4.18.0-553.50.1.lve.el8.x86_64 #1 SMP Thu Apr 17 19:10:24 UTC 2025 x86_64
User	luxeelil
PHP Version	8.0.30
Software	LiteSpeed
Doc root	Writable

Edit File : engine.h \| Size : 33.91 KB
/* * Copyright 2000-2022 The OpenSSL Project Authors. All Rights Reserved. * Copyright (c) 2002, Oracle and/or its affiliates. All rights reserved * * Licensed under the OpenSSL license (the "License"). You may not use * this file except in compliance with the License. You can obtain a copy * in the file LICENSE in the source distribution or at * https://www.openssl.org/source/license.html / #ifndef HEADER_ENGINE_H # define HEADER_ENGINE_H # include <openssl/opensslconf.h> # ifndef OPENSSL_NO_ENGINE # if OPENSSL_API_COMPAT < 0x10100000L # include <openssl/bn.h> # include <openssl/rsa.h> # include <openssl/dsa.h> # include <openssl/dh.h> # include <openssl/ec.h> # include <openssl/rand.h> # include <openssl/ui.h> # include <openssl/err.h> # endif # include <openssl/ossl_typ.h> # include <openssl/symhacks.h> # include <openssl/x509.h> # include <openssl/engineerr.h> # ifdef __cplusplus extern "C" { # endif / * These flags are used to control combinations of algorithm (methods) by * bitwise "OR"ing. / # define ENGINE_METHOD_RSA (unsigned int)0x0001 # define ENGINE_METHOD_DSA (unsigned int)0x0002 # define ENGINE_METHOD_DH (unsigned int)0x0004 # define ENGINE_METHOD_RAND (unsigned int)0x0008 # define ENGINE_METHOD_CIPHERS (unsigned int)0x0040 # define ENGINE_METHOD_DIGESTS (unsigned int)0x0080 # define ENGINE_METHOD_PKEY_METHS (unsigned int)0x0200 # define ENGINE_METHOD_PKEY_ASN1_METHS (unsigned int)0x0400 # define ENGINE_METHOD_EC (unsigned int)0x0800 / Obvious all-or-nothing cases. / # define ENGINE_METHOD_ALL (unsigned int)0xFFFF # define ENGINE_METHOD_NONE (unsigned int)0x0000 / * This(ese) flag(s) controls behaviour of the ENGINE_TABLE mechanism used * internally to control registration of ENGINE implementations, and can be * set by ENGINE_set_table_flags(). The "NOINIT" flag prevents attempts to * initialise registered ENGINEs if they are not already initialised. / # define ENGINE_TABLE_FLAG_NOINIT (unsigned int)0x0001 / ENGINE flags that can be set by ENGINE_set_flags(). / / Not used / / #define ENGINE_FLAGS_MALLOCED 0x0001 / / * This flag is for ENGINEs that wish to handle the various 'CMD'-related * control commands on their own. Without this flag, ENGINE_ctrl() handles * these control commands on behalf of the ENGINE using their "cmd_defns" * data. / # define ENGINE_FLAGS_MANUAL_CMD_CTRL (int)0x0002 / * This flag is for ENGINEs who return new duplicate structures when found * via "ENGINE_by_id()". When an ENGINE must store state (eg. if * ENGINE_ctrl() commands are called in sequence as part of some stateful * process like key-generation setup and execution), it can set this flag - * then each attempt to obtain the ENGINE will result in it being copied into * a new structure. Normally, ENGINEs don't declare this flag so * ENGINE_by_id() just increments the existing ENGINE's structural reference * count. / # define ENGINE_FLAGS_BY_ID_COPY (int)0x0004 / * This flag if for an ENGINE that does not want its methods registered as * part of ENGINE_register_all_complete() for example if the methods are not * usable as default methods. / # define ENGINE_FLAGS_NO_REGISTER_ALL (int)0x0008 / * ENGINEs can support their own command types, and these flags are used in * ENGINE_CTRL_GET_CMD_FLAGS to indicate to the caller what kind of input * each command expects. Currently only numeric and string input is * supported. If a control command supports none of the _NUMERIC, _STRING, or * _NO_INPUT options, then it is regarded as an "internal" control command - * and not for use in config setting situations. As such, they're not * available to the ENGINE_ctrl_cmd_string() function, only raw ENGINE_ctrl() * access. Changes to this list of 'command types' should be reflected * carefully in ENGINE_cmd_is_executable() and ENGINE_ctrl_cmd_string(). / / accepts a 'long' input value (3rd parameter to ENGINE_ctrl) / # define ENGINE_CMD_FLAG_NUMERIC (unsigned int)0x0001 / * accepts string input (cast from 'void' to 'const char ', 4th parameter * to ENGINE_ctrl) / # define ENGINE_CMD_FLAG_STRING (unsigned int)0x0002 / * Indicates that the control command takes no input. Ie. the control * command is unparameterised. / # define ENGINE_CMD_FLAG_NO_INPUT (unsigned int)0x0004 / * Indicates that the control command is internal. This control command won't * be shown in any output, and is only usable through the ENGINE_ctrl_cmd() * function. / # define ENGINE_CMD_FLAG_INTERNAL (unsigned int)0x0008 / * NB: These 3 control commands are deprecated and should not be used. * ENGINEs relying on these commands should compile conditional support for * compatibility (eg. if these symbols are defined) but should also migrate * the same functionality to their own ENGINE-specific control functions that * can be "discovered" by calling applications. The fact these control * commands wouldn't be "executable" (ie. usable by text-based config) * doesn't change the fact that application code can find and use them * without requiring per-ENGINE hacking. / / * These flags are used to tell the ctrl function what should be done. All * command numbers are shared between all engines, even if some don't make * sense to some engines. In such a case, they do nothing but return the * error ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED. / # define ENGINE_CTRL_SET_LOGSTREAM 1 # define ENGINE_CTRL_SET_PASSWORD_CALLBACK 2 # define ENGINE_CTRL_HUP 3/ Close and reinitialise * any handles/connections * etc. / # define ENGINE_CTRL_SET_USER_INTERFACE 4/ Alternative to callback / # define ENGINE_CTRL_SET_CALLBACK_DATA 5/ User-specific data, used * when calling the password * callback and the user * interface / # define ENGINE_CTRL_LOAD_CONFIGURATION 6/ Load a configuration, * given a string that * represents a file name * or so / # define ENGINE_CTRL_LOAD_SECTION 7/ Load data from a given * section in the already * loaded configuration / / * These control commands allow an application to deal with an arbitrary * engine in a dynamic way. Warn: Negative return values indicate errors FOR * THESE COMMANDS because zero is used to indicate 'end-of-list'. Other * commands, including ENGINE-specific command types, return zero for an * error. An ENGINE can choose to implement these ctrl functions, and can * internally manage things however it chooses - it does so by setting the * ENGINE_FLAGS_MANUAL_CMD_CTRL flag (using ENGINE_set_flags()). Otherwise * the ENGINE_ctrl() code handles this on the ENGINE's behalf using the * cmd_defns data (set using ENGINE_set_cmd_defns()). This means an ENGINE's * ctrl() handler need only implement its own commands - the above "meta" * commands will be taken care of. / / * Returns non-zero if the supplied ENGINE has a ctrl() handler. If "not", * then all the remaining control commands will return failure, so it is * worth checking this first if the caller is trying to "discover" the * engine's capabilities and doesn't want errors generated unnecessarily. / # define ENGINE_CTRL_HAS_CTRL_FUNCTION 10 / * Returns a positive command number for the first command supported by the * engine. Returns zero if no ctrl commands are supported. / # define ENGINE_CTRL_GET_FIRST_CMD_TYPE 11 / * The 'long' argument specifies a command implemented by the engine, and the * return value is the next command supported, or zero if there are no more. / # define ENGINE_CTRL_GET_NEXT_CMD_TYPE 12 / * The 'void' argument is a command name (cast from 'const char '), and the * return value is the command that corresponds to it. / # define ENGINE_CTRL_GET_CMD_FROM_NAME 13 / * The next two allow a command to be converted into its corresponding string * form. In each case, the 'long' argument supplies the command. In the * NAME_LEN case, the return value is the length of the command name (not * counting a trailing EOL). In the NAME case, the 'void' argument must be a string buffer large enough, and it will be populated with the name of the * command (WITH a trailing EOL). / # define ENGINE_CTRL_GET_NAME_LEN_FROM_CMD 14 # define ENGINE_CTRL_GET_NAME_FROM_CMD 15 / The next two are similar but give a "short description" of a command. / # define ENGINE_CTRL_GET_DESC_LEN_FROM_CMD 16 # define ENGINE_CTRL_GET_DESC_FROM_CMD 17 / * With this command, the return value is the OR'd combination of * ENGINE_CMD_FLAG_*** values that indicate what kind of input a given * engine-specific ctrl command expects. / # define ENGINE_CTRL_GET_CMD_FLAGS 18 / * ENGINE implementations should start the numbering of their own control * commands from this value. (ie. ENGINE_CMD_BASE, ENGINE_CMD_BASE + 1, etc). / # define ENGINE_CMD_BASE 200 / * NB: These 2 nCipher "chil" control commands are deprecated, and their * functionality is now available through ENGINE-specific control commands * (exposed through the above-mentioned 'CMD'-handling). Code using these 2 * commands should be migrated to the more general command handling before * these are removed. / / Flags specific to the nCipher "chil" engine / # define ENGINE_CTRL_CHIL_SET_FORKCHECK 100 / * Depending on the value of the (long)i argument, this sets or * unsets the SimpleForkCheck flag in the CHIL API to enable or * disable checking and workarounds for applications that fork(). / # define ENGINE_CTRL_CHIL_NO_LOCKING 101 / * This prevents the initialisation function from providing mutex * callbacks to the nCipher library. / / * If an ENGINE supports its own specific control commands and wishes the * framework to handle the above 'ENGINE_CMD_**'-manipulation commands on its behalf, it should supply a null-terminated array of ENGINE_CMD_DEFN * entries to ENGINE_set_cmd_defns(). It should also implement a ctrl() * handler that supports the stated commands (ie. the "cmd_num" entries as * described by the array). NB: The array must be ordered in increasing order * of cmd_num. "null-terminated" means that the last ENGINE_CMD_DEFN element * has cmd_num set to zero and/or cmd_name set to NULL. / typedef struct ENGINE_CMD_DEFN_st { unsigned int cmd_num; / The command number / const char cmd_name; /* The command name itself / const char cmd_desc; /* A short description of the command / unsigned int cmd_flags; / The input the command expects / } ENGINE_CMD_DEFN; / Generic function pointer / typedef int (ENGINE_GEN_FUNC_PTR) (void); /* Generic function pointer taking no arguments / typedef int (ENGINE_GEN_INT_FUNC_PTR) (ENGINE ); / Specific control function pointer / typedef int (ENGINE_CTRL_FUNC_PTR) (ENGINE , int, long, void , void (f) (void)); / Generic load_key function pointer / typedef EVP_PKEY (ENGINE_LOAD_KEY_PTR)(ENGINE , const char , UI_METHOD ui_method, void callback_data); typedef int (ENGINE_SSL_CLIENT_CERT_PTR) (ENGINE , SSL ssl, STACK_OF(X509_NAME) ca_dn, X509 pcert, EVP_PKEY pkey, STACK_OF(X509) pother, UI_METHOD ui_method, void callback_data); /- * These callback types are for an ENGINE's handler for cipher and digest logic. * These handlers have these prototypes; * int foo(ENGINE e, const EVP_CIPHER cipher, const int nids, int nid); int foo(ENGINE e, const EVP_MD digest, const int nids, int nid); Looking at how to implement these handlers in the case of cipher support, if * the framework wants the EVP_CIPHER for 'nid', it will call; * foo(e, &p_evp_cipher, NULL, nid); (return zero for failure) * If the framework wants a list of supported 'nid's, it will call; * foo(e, NULL, &p_nids, 0); (returns number of 'nids' or -1 for error) / / * Returns to a pointer to the array of supported cipher 'nid's. If the * second parameter is non-NULL it is set to the size of the returned array. / typedef int (ENGINE_CIPHERS_PTR) (ENGINE , const EVP_CIPHER , const int , int); typedef int (ENGINE_DIGESTS_PTR) (ENGINE , const EVP_MD , const int , int); typedef int (ENGINE_PKEY_METHS_PTR) (ENGINE , EVP_PKEY_METHOD , const int , int); typedef int (ENGINE_PKEY_ASN1_METHS_PTR) (ENGINE , EVP_PKEY_ASN1_METHOD , const int , int); / * STRUCTURE functions ... all of these functions deal with pointers to * ENGINE structures where the pointers have a "structural reference". This * means that their reference is to allowed access to the structure but it * does not imply that the structure is functional. To simply increment or * decrement the structural reference count, use ENGINE_by_id and * ENGINE_free. NB: This is not required when iterating using ENGINE_get_next * as it will automatically decrement the structural reference count of the * "current" ENGINE and increment the structural reference count of the * ENGINE it returns (unless it is NULL). / / Get the first/last "ENGINE" type available. / ENGINE ENGINE_get_first(void); ENGINE ENGINE_get_last(void); / Iterate to the next/previous "ENGINE" type (NULL = end of the list). / ENGINE ENGINE_get_next(ENGINE e); ENGINE ENGINE_get_prev(ENGINE e); / Add another "ENGINE" type into the array. / int ENGINE_add(ENGINE e); /* Remove an existing "ENGINE" type from the array. / int ENGINE_remove(ENGINE e); /* Retrieve an engine from the list by its unique "id" value. / ENGINE ENGINE_by_id(const char id); #if OPENSSL_API_COMPAT < 0x10100000L # define ENGINE_load_openssl() \ OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_OPENSSL, NULL) # define ENGINE_load_dynamic() \ OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_DYNAMIC, NULL) # ifndef OPENSSL_NO_STATIC_ENGINE # define ENGINE_load_padlock() \ OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_PADLOCK, NULL) # define ENGINE_load_capi() \ OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_CAPI, NULL) # define ENGINE_load_afalg() \ OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_AFALG, NULL) # endif # define ENGINE_load_cryptodev() \ OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_CRYPTODEV, NULL) # define ENGINE_load_rdrand() \ OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_RDRAND, NULL) #endif void ENGINE_load_builtin_engines(void); / * Get and set global flags (ENGINE_TABLE_FLAG_**) for the implementation "registry" handling. / unsigned int ENGINE_get_table_flags(void); void ENGINE_set_table_flags(unsigned int flags); /- Manage registration of ENGINEs per "table". For each type, there are 3 * functions; * ENGINE_register_**(e) - registers the implementation from 'e' (if it has one) ENGINE_unregister_**(e) - unregister the implementation from 'e' ENGINE_register_all_*() - call ENGINE_register_() for each 'e' in the list Cleanup is automatically registered from each table when required. / int ENGINE_register_RSA(ENGINE e); void ENGINE_unregister_RSA(ENGINE e); void ENGINE_register_all_RSA(void); int ENGINE_register_DSA(ENGINE e); void ENGINE_unregister_DSA(ENGINE e); void ENGINE_register_all_DSA(void); int ENGINE_register_EC(ENGINE e); void ENGINE_unregister_EC(ENGINE e); void ENGINE_register_all_EC(void); int ENGINE_register_DH(ENGINE e); void ENGINE_unregister_DH(ENGINE e); void ENGINE_register_all_DH(void); int ENGINE_register_RAND(ENGINE e); void ENGINE_unregister_RAND(ENGINE e); void ENGINE_register_all_RAND(void); int ENGINE_register_ciphers(ENGINE e); void ENGINE_unregister_ciphers(ENGINE e); void ENGINE_register_all_ciphers(void); int ENGINE_register_digests(ENGINE e); void ENGINE_unregister_digests(ENGINE e); void ENGINE_register_all_digests(void); int ENGINE_register_pkey_meths(ENGINE e); void ENGINE_unregister_pkey_meths(ENGINE e); void ENGINE_register_all_pkey_meths(void); int ENGINE_register_pkey_asn1_meths(ENGINE e); void ENGINE_unregister_pkey_asn1_meths(ENGINE e); void ENGINE_register_all_pkey_asn1_meths(void); / * These functions register all support from the above categories. Note, use * of these functions can result in static linkage of code your application * may not need. If you only need a subset of functionality, consider using * more selective initialisation. / int ENGINE_register_complete(ENGINE e); int ENGINE_register_all_complete(void); /* * Send parameterised control commands to the engine. The possibilities to * send down an integer, a pointer to data or a function pointer are * provided. Any of the parameters may or may not be NULL, depending on the * command number. In actuality, this function only requires a structural * (rather than functional) reference to an engine, but many control commands * may require the engine be functional. The caller should be aware of trying * commands that require an operational ENGINE, and only use functional * references in such situations. / int ENGINE_ctrl(ENGINE e, int cmd, long i, void p, void (f) (void)); /* * This function tests if an ENGINE-specific command is usable as a * "setting". Eg. in an application's config file that gets processed through * ENGINE_ctrl_cmd_string(). If this returns zero, it is not available to * ENGINE_ctrl_cmd_string(), only ENGINE_ctrl(). / int ENGINE_cmd_is_executable(ENGINE e, int cmd); /* * This function works like ENGINE_ctrl() with the exception of taking a * command name instead of a command number, and can handle optional * commands. See the comment on ENGINE_ctrl_cmd_string() for an explanation * on how to use the cmd_name and cmd_optional. / int ENGINE_ctrl_cmd(ENGINE e, const char cmd_name, long i, void p, void (f) (void), int cmd_optional); / * This function passes a command-name and argument to an ENGINE. The * cmd_name is converted to a command number and the control command is * called using 'arg' as an argument (unless the ENGINE doesn't support such * a command, in which case no control command is called). The command is * checked for input flags, and if necessary the argument will be converted * to a numeric value. If cmd_optional is non-zero, then if the ENGINE * doesn't support the given cmd_name the return value will be success * anyway. This function is intended for applications to use so that users * (or config files) can supply engine-specific config data to the ENGINE at * run-time to control behaviour of specific engines. As such, it shouldn't * be used for calling ENGINE_ctrl() functions that return data, deal with * binary data, or that are otherwise supposed to be used directly through * ENGINE_ctrl() in application code. Any "return" data from an ENGINE_ctrl() * operation in this function will be lost - the return value is interpreted * as failure if the return value is zero, success otherwise, and this * function returns a boolean value as a result. In other words, vendors of * 'ENGINE'-enabled devices should write ENGINE implementations with * parameterisations that work in this scheme, so that compliant ENGINE-based * applications can work consistently with the same configuration for the * same ENGINE-enabled devices, across applications. / int ENGINE_ctrl_cmd_string(ENGINE e, const char cmd_name, const char arg, int cmd_optional); /* * These functions are useful for manufacturing new ENGINE structures. They * don't address reference counting at all - one uses them to populate an * ENGINE structure with personalised implementations of things prior to * using it directly or adding it to the builtin ENGINE list in OpenSSL. * These are also here so that the ENGINE structure doesn't have to be * exposed and break binary compatibility! / ENGINE ENGINE_new(void); int ENGINE_free(ENGINE e); int ENGINE_up_ref(ENGINE e); int ENGINE_set_id(ENGINE e, const char id); int ENGINE_set_name(ENGINE e, const char name); int ENGINE_set_RSA(ENGINE e, const RSA_METHOD rsa_meth); int ENGINE_set_DSA(ENGINE e, const DSA_METHOD dsa_meth); int ENGINE_set_EC(ENGINE e, const EC_KEY_METHOD ecdsa_meth); int ENGINE_set_DH(ENGINE e, const DH_METHOD dh_meth); int ENGINE_set_RAND(ENGINE e, const RAND_METHOD rand_meth); int ENGINE_set_destroy_function(ENGINE e, ENGINE_GEN_INT_FUNC_PTR destroy_f); int ENGINE_set_init_function(ENGINE e, ENGINE_GEN_INT_FUNC_PTR init_f); int ENGINE_set_finish_function(ENGINE e, ENGINE_GEN_INT_FUNC_PTR finish_f); int ENGINE_set_ctrl_function(ENGINE e, ENGINE_CTRL_FUNC_PTR ctrl_f); int ENGINE_set_load_privkey_function(ENGINE e, ENGINE_LOAD_KEY_PTR loadpriv_f); int ENGINE_set_load_pubkey_function(ENGINE e, ENGINE_LOAD_KEY_PTR loadpub_f); int ENGINE_set_load_ssl_client_cert_function(ENGINE e, ENGINE_SSL_CLIENT_CERT_PTR loadssl_f); int ENGINE_set_ciphers(ENGINE e, ENGINE_CIPHERS_PTR f); int ENGINE_set_digests(ENGINE e, ENGINE_DIGESTS_PTR f); int ENGINE_set_pkey_meths(ENGINE e, ENGINE_PKEY_METHS_PTR f); int ENGINE_set_pkey_asn1_meths(ENGINE e, ENGINE_PKEY_ASN1_METHS_PTR f); int ENGINE_set_flags(ENGINE e, int flags); int ENGINE_set_cmd_defns(ENGINE e, const ENGINE_CMD_DEFN defns); /* These functions allow control over any per-structure ENGINE data. / #define ENGINE_get_ex_new_index(l, p, newf, dupf, freef) \ CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_ENGINE, l, p, newf, dupf, freef) int ENGINE_set_ex_data(ENGINE e, int idx, void arg); void ENGINE_get_ex_data(const ENGINE e, int idx); #if OPENSSL_API_COMPAT < 0x10100000L / * This function previously cleaned up anything that needs it. Auto-deinit will * now take care of it so it is no longer required to call this function. / # define ENGINE_cleanup() while(0) continue #endif / * These return values from within the ENGINE structure. These can be useful * with functional references as well as structural references - it depends * which you obtained. Using the result for functional purposes if you only * obtained a structural reference may be problematic! / const char ENGINE_get_id(const ENGINE e); const char ENGINE_get_name(const ENGINE e); const RSA_METHOD ENGINE_get_RSA(const ENGINE e); const DSA_METHOD ENGINE_get_DSA(const ENGINE e); const EC_KEY_METHOD ENGINE_get_EC(const ENGINE e); const DH_METHOD ENGINE_get_DH(const ENGINE e); const RAND_METHOD ENGINE_get_RAND(const ENGINE e); ENGINE_GEN_INT_FUNC_PTR ENGINE_get_destroy_function(const ENGINE e); ENGINE_GEN_INT_FUNC_PTR ENGINE_get_init_function(const ENGINE e); ENGINE_GEN_INT_FUNC_PTR ENGINE_get_finish_function(const ENGINE e); ENGINE_CTRL_FUNC_PTR ENGINE_get_ctrl_function(const ENGINE e); ENGINE_LOAD_KEY_PTR ENGINE_get_load_privkey_function(const ENGINE e); ENGINE_LOAD_KEY_PTR ENGINE_get_load_pubkey_function(const ENGINE e); ENGINE_SSL_CLIENT_CERT_PTR ENGINE_get_ssl_client_cert_function(const ENGINE e); ENGINE_CIPHERS_PTR ENGINE_get_ciphers(const ENGINE e); ENGINE_DIGESTS_PTR ENGINE_get_digests(const ENGINE e); ENGINE_PKEY_METHS_PTR ENGINE_get_pkey_meths(const ENGINE e); ENGINE_PKEY_ASN1_METHS_PTR ENGINE_get_pkey_asn1_meths(const ENGINE e); const EVP_CIPHER ENGINE_get_cipher(ENGINE e, int nid); const EVP_MD ENGINE_get_digest(ENGINE e, int nid); const EVP_PKEY_METHOD ENGINE_get_pkey_meth(ENGINE e, int nid); const EVP_PKEY_ASN1_METHOD ENGINE_get_pkey_asn1_meth(ENGINE e, int nid); const EVP_PKEY_ASN1_METHOD ENGINE_get_pkey_asn1_meth_str(ENGINE e, const char str, int len); const EVP_PKEY_ASN1_METHOD ENGINE_pkey_asn1_find_str(ENGINE *pe, const char str, int len); const ENGINE_CMD_DEFN ENGINE_get_cmd_defns(const ENGINE e); int ENGINE_get_flags(const ENGINE e); / * FUNCTIONAL functions. These functions deal with ENGINE structures that * have (or will) be initialised for use. Broadly speaking, the structural * functions are useful for iterating the list of available engine types, * creating new engine types, and other "list" operations. These functions * actually deal with ENGINEs that are to be used. As such these functions * can fail (if applicable) when particular engines are unavailable - eg. if * a hardware accelerator is not attached or not functioning correctly. Each * ENGINE has 2 reference counts; structural and functional. Every time a * functional reference is obtained or released, a corresponding structural * reference is automatically obtained or released too. / / * Initialise a engine type for use (or up its reference count if it's * already in use). This will fail if the engine is not currently operational * and cannot initialise. / int ENGINE_init(ENGINE e); /* * Free a functional reference to a engine type. This does not require a * corresponding call to ENGINE_free as it also releases a structural * reference. / int ENGINE_finish(ENGINE e); /* * The following functions handle keys that are stored in some secondary * location, handled by the engine. The storage may be on a card or * whatever. / EVP_PKEY ENGINE_load_private_key(ENGINE e, const char key_id, UI_METHOD ui_method, void callback_data); EVP_PKEY ENGINE_load_public_key(ENGINE e, const char key_id, UI_METHOD ui_method, void callback_data); int ENGINE_load_ssl_client_cert(ENGINE e, SSL s, STACK_OF(X509_NAME) ca_dn, X509 pcert, EVP_PKEY ppkey, STACK_OF(X509) *pother, UI_METHOD ui_method, void callback_data); / * This returns a pointer for the current ENGINE structure that is (by * default) performing any RSA operations. The value returned is an * incremented reference, so it should be free'd (ENGINE_finish) before it is * discarded. / ENGINE ENGINE_get_default_RSA(void); /* Same for the other "methods" / ENGINE ENGINE_get_default_DSA(void); ENGINE ENGINE_get_default_EC(void); ENGINE ENGINE_get_default_DH(void); ENGINE ENGINE_get_default_RAND(void); / * These functions can be used to get a functional reference to perform * ciphering or digesting corresponding to "nid". / ENGINE ENGINE_get_cipher_engine(int nid); ENGINE ENGINE_get_digest_engine(int nid); ENGINE ENGINE_get_pkey_meth_engine(int nid); ENGINE ENGINE_get_pkey_asn1_meth_engine(int nid); / * This sets a new default ENGINE structure for performing RSA operations. If * the result is non-zero (success) then the ENGINE structure will have had * its reference count up'd so the caller should still free their own * reference 'e'. / int ENGINE_set_default_RSA(ENGINE e); int ENGINE_set_default_string(ENGINE e, const char def_list); /* Same for the other "methods" / int ENGINE_set_default_DSA(ENGINE e); int ENGINE_set_default_EC(ENGINE e); int ENGINE_set_default_DH(ENGINE e); int ENGINE_set_default_RAND(ENGINE e); int ENGINE_set_default_ciphers(ENGINE e); int ENGINE_set_default_digests(ENGINE e); int ENGINE_set_default_pkey_meths(ENGINE e); int ENGINE_set_default_pkey_asn1_meths(ENGINE e); / * The combination "set" - the flags are bitwise "OR"d from the * ENGINE_METHOD_*** defines above. As with the "ENGINE_register_complete()" * function, this function can result in unnecessary static linkage. If your * application requires only specific functionality, consider using more * selective functions. / int ENGINE_set_default(ENGINE e, unsigned int flags); void ENGINE_add_conf_module(void); /* Deprecated functions ... / / int ENGINE_clear_defaults(void); / /************************/ / DYNAMIC ENGINE SUPPORT / /************************/ / Binary/behaviour compatibility levels / # define OSSL_DYNAMIC_VERSION (unsigned long)0x00030000 / * Binary versions older than this are too old for us (whether we're a loader * or a loadee) / # define OSSL_DYNAMIC_OLDEST (unsigned long)0x00030000 / * When compiling an ENGINE entirely as an external shared library, loadable * by the "dynamic" ENGINE, these types are needed. The 'dynamic_fns' * structure type provides the calling application's (or library's) error * functionality and memory management function pointers to the loaded * library. These should be used/set in the loaded library code so that the * loading application's 'state' will be used/changed in all operations. The * 'static_state' pointer allows the loaded library to know if it shares the * same static data as the calling application (or library), and thus whether * these callbacks need to be set or not. / typedef void (dyn_MEM_malloc_fn) (size_t, const char , int); typedef void (dyn_MEM_realloc_fn) (void , size_t, const char , int); typedef void (dyn_MEM_free_fn) (void , const char , int); typedef struct st_dynamic_MEM_fns { dyn_MEM_malloc_fn malloc_fn; dyn_MEM_realloc_fn realloc_fn; dyn_MEM_free_fn free_fn; } dynamic_MEM_fns; / * FIXME: Perhaps the memory and locking code (crypto.h) should declare and * use these types so we (and any other dependent code) can simplify a bit?? / / The top-level structure / typedef struct st_dynamic_fns { void static_state; dynamic_MEM_fns mem_fns; } dynamic_fns; /* * The version checking function should be of this prototype. NB: The * ossl_version value passed in is the OSSL_DYNAMIC_VERSION of the loading * code. If this function returns zero, it indicates a (potential) version * incompatibility and the loaded library doesn't believe it can proceed. * Otherwise, the returned value is the (latest) version supported by the * loading library. The loader may still decide that the loaded code's * version is unsatisfactory and could veto the load. The function is * expected to be implemented with the symbol name "v_check", and a default * implementation can be fully instantiated with * IMPLEMENT_DYNAMIC_CHECK_FN(). / typedef unsigned long (dynamic_v_check_fn) (unsigned long ossl_version); # define IMPLEMENT_DYNAMIC_CHECK_FN() \ OPENSSL_EXPORT unsigned long v_check(unsigned long v); \ OPENSSL_EXPORT unsigned long v_check(unsigned long v) { \ if (v >= OSSL_DYNAMIC_OLDEST) return OSSL_DYNAMIC_VERSION; \ return 0; } /* * This function is passed the ENGINE structure to initialise with its own * function and command settings. It should not adjust the structural or * functional reference counts. If this function returns zero, (a) the load * will be aborted, (b) the previous ENGINE state will be memcpy'd back onto * the structure, and (c) the shared library will be unloaded. So * implementations should do their own internal cleanup in failure * circumstances otherwise they could leak. The 'id' parameter, if non-NULL, * represents the ENGINE id that the loader is looking for. If this is NULL, * the shared library can choose to return failure or to initialise a * 'default' ENGINE. If non-NULL, the shared library must initialise only an * ENGINE matching the passed 'id'. The function is expected to be * implemented with the symbol name "bind_engine". A standard implementation * can be instantiated with IMPLEMENT_DYNAMIC_BIND_FN(fn) where the parameter * 'fn' is a callback function that populates the ENGINE structure and * returns an int value (zero for failure). 'fn' should have prototype; * [static] int fn(ENGINE e, const char id); / typedef int (dynamic_bind_engine) (ENGINE e, const char id, const dynamic_fns fns); # define IMPLEMENT_DYNAMIC_BIND_FN(fn) \ OPENSSL_EXPORT \ int bind_engine(ENGINE e, const char id, const dynamic_fns fns); \ OPENSSL_EXPORT \ int bind_engine(ENGINE e, const char id, const dynamic_fns fns) { \ if (ENGINE_get_static_state() == fns->static_state) goto skip_cbs; \ CRYPTO_set_mem_functions(fns->mem_fns.malloc_fn, \ fns->mem_fns.realloc_fn, \ fns->mem_fns.free_fn); \ OPENSSL_init_crypto(OPENSSL_INIT_NO_ATEXIT, NULL); \ skip_cbs: \ if (!fn(e, id)) return 0; \ return 1; } / * If the loading application (or library) and the loaded ENGINE library * share the same static data (eg. they're both dynamically linked to the * same libcrypto.so) we need a way to avoid trying to set system callbacks - * this would fail, and for the same reason that it's unnecessary to try. If * the loaded ENGINE has (or gets from through the loader) its own copy of * the libcrypto static data, we will need to set the callbacks. The easiest * way to detect this is to have a function that returns a pointer to some * static data and let the loading application and loaded ENGINE compare * their respective values. / void ENGINE_get_static_state(void); # if defined(__OpenBSD__) \|\| defined(__FreeBSD__) \|\| defined(__DragonFly__) DEPRECATEDIN_1_1_0(void ENGINE_setup_bsd_cryptodev(void)) # endif # ifdef __cplusplus } # endif # endif #endif Back

Edit File : engine.h | Size : 33.91 KB

/*
 * Copyright 2000-2022 The OpenSSL Project Authors. All Rights Reserved.
 * Copyright (c) 2002, Oracle and/or its affiliates. All rights reserved
 *
 * Licensed under the OpenSSL license (the "License").  You may not use
 * this file except in compliance with the License.  You can obtain a copy
 * in the file LICENSE in the source distribution or at
 * https://www.openssl.org/source/license.html
 */

#ifndef HEADER_ENGINE_H
# define HEADER_ENGINE_H

# include <openssl/opensslconf.h>

# ifndef OPENSSL_NO_ENGINE
# if OPENSSL_API_COMPAT < 0x10100000L
#  include <openssl/bn.h>
#  include <openssl/rsa.h>
#  include <openssl/dsa.h>
#  include <openssl/dh.h>
#  include <openssl/ec.h>
#  include <openssl/rand.h>
#  include <openssl/ui.h>
#  include <openssl/err.h>
# endif
# include <openssl/ossl_typ.h>
# include <openssl/symhacks.h>
# include <openssl/x509.h>
# include <openssl/engineerr.h>
# ifdef  __cplusplus
extern "C" {
# endif

/*
 * These flags are used to control combinations of algorithm (methods) by
 * bitwise "OR"ing.
 */
# define ENGINE_METHOD_RSA               (unsigned int)0x0001
# define ENGINE_METHOD_DSA               (unsigned int)0x0002
# define ENGINE_METHOD_DH                (unsigned int)0x0004
# define ENGINE_METHOD_RAND              (unsigned int)0x0008
# define ENGINE_METHOD_CIPHERS           (unsigned int)0x0040
# define ENGINE_METHOD_DIGESTS           (unsigned int)0x0080
# define ENGINE_METHOD_PKEY_METHS        (unsigned int)0x0200
# define ENGINE_METHOD_PKEY_ASN1_METHS   (unsigned int)0x0400
# define ENGINE_METHOD_EC                (unsigned int)0x0800
/* Obvious all-or-nothing cases. */
# define ENGINE_METHOD_ALL               (unsigned int)0xFFFF
# define ENGINE_METHOD_NONE              (unsigned int)0x0000

/*
 * This(ese) flag(s) controls behaviour of the ENGINE_TABLE mechanism used
 * internally to control registration of ENGINE implementations, and can be
 * set by ENGINE_set_table_flags(). The "NOINIT" flag prevents attempts to
 * initialise registered ENGINEs if they are not already initialised.
 */
# define ENGINE_TABLE_FLAG_NOINIT        (unsigned int)0x0001

/* ENGINE flags that can be set by ENGINE_set_flags(). */
/* Not used */
/* #define ENGINE_FLAGS_MALLOCED        0x0001 */

/*
 * This flag is for ENGINEs that wish to handle the various 'CMD'-related
 * control commands on their own. Without this flag, ENGINE_ctrl() handles
 * these control commands on behalf of the ENGINE using their "cmd_defns"
 * data.
 */
# define ENGINE_FLAGS_MANUAL_CMD_CTRL    (int)0x0002

/*
 * This flag is for ENGINEs who return new duplicate structures when found
 * via "ENGINE_by_id()". When an ENGINE must store state (eg. if
 * ENGINE_ctrl() commands are called in sequence as part of some stateful
 * process like key-generation setup and execution), it can set this flag -
 * then each attempt to obtain the ENGINE will result in it being copied into
 * a new structure. Normally, ENGINEs don't declare this flag so
 * ENGINE_by_id() just increments the existing ENGINE's structural reference
 * count.
 */
# define ENGINE_FLAGS_BY_ID_COPY         (int)0x0004

/*
 * This flag if for an ENGINE that does not want its methods registered as
 * part of ENGINE_register_all_complete() for example if the methods are not
 * usable as default methods.
 */

# define ENGINE_FLAGS_NO_REGISTER_ALL    (int)0x0008

/*
 * ENGINEs can support their own command types, and these flags are used in
 * ENGINE_CTRL_GET_CMD_FLAGS to indicate to the caller what kind of input
 * each command expects. Currently only numeric and string input is
 * supported. If a control command supports none of the _NUMERIC, _STRING, or
 * _NO_INPUT options, then it is regarded as an "internal" control command -
 * and not for use in config setting situations. As such, they're not
 * available to the ENGINE_ctrl_cmd_string() function, only raw ENGINE_ctrl()
 * access. Changes to this list of 'command types' should be reflected
 * carefully in ENGINE_cmd_is_executable() and ENGINE_ctrl_cmd_string().
 */

/* accepts a 'long' input value (3rd parameter to ENGINE_ctrl) */
# define ENGINE_CMD_FLAG_NUMERIC         (unsigned int)0x0001
/*
 * accepts string input (cast from 'void*' to 'const char *', 4th parameter
 * to ENGINE_ctrl)
 */
# define ENGINE_CMD_FLAG_STRING          (unsigned int)0x0002
/*
 * Indicates that the control command takes *no* input. Ie. the control
 * command is unparameterised.
 */
# define ENGINE_CMD_FLAG_NO_INPUT        (unsigned int)0x0004
/*
 * Indicates that the control command is internal. This control command won't
 * be shown in any output, and is only usable through the ENGINE_ctrl_cmd()
 * function.
 */
# define ENGINE_CMD_FLAG_INTERNAL        (unsigned int)0x0008

/*
 * NB: These 3 control commands are deprecated and should not be used.
 * ENGINEs relying on these commands should compile conditional support for
 * compatibility (eg. if these symbols are defined) but should also migrate
 * the same functionality to their own ENGINE-specific control functions that
 * can be "discovered" by calling applications. The fact these control
 * commands wouldn't be "executable" (ie. usable by text-based config)
 * doesn't change the fact that application code can find and use them
 * without requiring per-ENGINE hacking.
 */

/*
 * These flags are used to tell the ctrl function what should be done. All
 * command numbers are shared between all engines, even if some don't make
 * sense to some engines.  In such a case, they do nothing but return the
 * error ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED.
 */
# define ENGINE_CTRL_SET_LOGSTREAM               1
# define ENGINE_CTRL_SET_PASSWORD_CALLBACK       2
# define ENGINE_CTRL_HUP                         3/* Close and reinitialise
                                                   * any handles/connections
                                                   * etc. */
# define ENGINE_CTRL_SET_USER_INTERFACE          4/* Alternative to callback */
# define ENGINE_CTRL_SET_CALLBACK_DATA           5/* User-specific data, used
                                                   * when calling the password
                                                   * callback and the user
                                                   * interface */
# define ENGINE_CTRL_LOAD_CONFIGURATION          6/* Load a configuration,
                                                   * given a string that
                                                   * represents a file name
                                                   * or so */
# define ENGINE_CTRL_LOAD_SECTION                7/* Load data from a given
                                                   * section in the already
                                                   * loaded configuration */

/*
 * These control commands allow an application to deal with an arbitrary
 * engine in a dynamic way. Warn: Negative return values indicate errors FOR
 * THESE COMMANDS because zero is used to indicate 'end-of-list'. Other
 * commands, including ENGINE-specific command types, return zero for an
 * error. An ENGINE can choose to implement these ctrl functions, and can
 * internally manage things however it chooses - it does so by setting the
 * ENGINE_FLAGS_MANUAL_CMD_CTRL flag (using ENGINE_set_flags()). Otherwise
 * the ENGINE_ctrl() code handles this on the ENGINE's behalf using the
 * cmd_defns data (set using ENGINE_set_cmd_defns()). This means an ENGINE's
 * ctrl() handler need only implement its own commands - the above "meta"
 * commands will be taken care of.
 */

/*
 * Returns non-zero if the supplied ENGINE has a ctrl() handler. If "not",
 * then all the remaining control commands will return failure, so it is
 * worth checking this first if the caller is trying to "discover" the
 * engine's capabilities and doesn't want errors generated unnecessarily.
 */
# define ENGINE_CTRL_HAS_CTRL_FUNCTION           10
/*
 * Returns a positive command number for the first command supported by the
 * engine. Returns zero if no ctrl commands are supported.
 */
# define ENGINE_CTRL_GET_FIRST_CMD_TYPE          11
/*
 * The 'long' argument specifies a command implemented by the engine, and the
 * return value is the next command supported, or zero if there are no more.
 */
# define ENGINE_CTRL_GET_NEXT_CMD_TYPE           12
/*
 * The 'void*' argument is a command name (cast from 'const char *'), and the
 * return value is the command that corresponds to it.
 */
# define ENGINE_CTRL_GET_CMD_FROM_NAME           13
/*
 * The next two allow a command to be converted into its corresponding string
 * form. In each case, the 'long' argument supplies the command. In the
 * NAME_LEN case, the return value is the length of the command name (not
 * counting a trailing EOL). In the NAME case, the 'void*' argument must be a
 * string buffer large enough, and it will be populated with the name of the
 * command (WITH a trailing EOL).
 */
# define ENGINE_CTRL_GET_NAME_LEN_FROM_CMD       14
# define ENGINE_CTRL_GET_NAME_FROM_CMD           15
/* The next two are similar but give a "short description" of a command. */
# define ENGINE_CTRL_GET_DESC_LEN_FROM_CMD       16
# define ENGINE_CTRL_GET_DESC_FROM_CMD           17
/*
 * With this command, the return value is the OR'd combination of
 * ENGINE_CMD_FLAG_*** values that indicate what kind of input a given
 * engine-specific ctrl command expects.
 */
# define ENGINE_CTRL_GET_CMD_FLAGS               18

/*
 * ENGINE implementations should start the numbering of their own control
 * commands from this value. (ie. ENGINE_CMD_BASE, ENGINE_CMD_BASE + 1, etc).
 */
# define ENGINE_CMD_BASE                         200

/*
 * NB: These 2 nCipher "chil" control commands are deprecated, and their
 * functionality is now available through ENGINE-specific control commands
 * (exposed through the above-mentioned 'CMD'-handling). Code using these 2
 * commands should be migrated to the more general command handling before
 * these are removed.
 */

/* Flags specific to the nCipher "chil" engine */
# define ENGINE_CTRL_CHIL_SET_FORKCHECK          100
        /*
         * Depending on the value of the (long)i argument, this sets or
         * unsets the SimpleForkCheck flag in the CHIL API to enable or
         * disable checking and workarounds for applications that fork().
         */
# define ENGINE_CTRL_CHIL_NO_LOCKING             101
        /*
         * This prevents the initialisation function from providing mutex
         * callbacks to the nCipher library.
         */

/*
 * If an ENGINE supports its own specific control commands and wishes the
 * framework to handle the above 'ENGINE_CMD_***'-manipulation commands on
 * its behalf, it should supply a null-terminated array of ENGINE_CMD_DEFN
 * entries to ENGINE_set_cmd_defns(). It should also implement a ctrl()
 * handler that supports the stated commands (ie. the "cmd_num" entries as
 * described by the array). NB: The array must be ordered in increasing order
 * of cmd_num. "null-terminated" means that the last ENGINE_CMD_DEFN element
 * has cmd_num set to zero and/or cmd_name set to NULL.
 */
typedef struct ENGINE_CMD_DEFN_st {
    unsigned int cmd_num;       /* The command number */
    const char *cmd_name;       /* The command name itself */
    const char *cmd_desc;       /* A short description of the command */
    unsigned int cmd_flags;     /* The input the command expects */
} ENGINE_CMD_DEFN;

/* Generic function pointer */
typedef int (*ENGINE_GEN_FUNC_PTR) (void);
/* Generic function pointer taking no arguments */
typedef int (*ENGINE_GEN_INT_FUNC_PTR) (ENGINE *);
/* Specific control function pointer */
typedef int (*ENGINE_CTRL_FUNC_PTR) (ENGINE *, int, long, void *,
                                     void (*f) (void));
/* Generic load_key function pointer */
typedef EVP_PKEY *(*ENGINE_LOAD_KEY_PTR)(ENGINE *, const char *,
                                         UI_METHOD *ui_method,
                                         void *callback_data);
typedef int (*ENGINE_SSL_CLIENT_CERT_PTR) (ENGINE *, SSL *ssl,
                                           STACK_OF(X509_NAME) *ca_dn,
                                           X509 **pcert, EVP_PKEY **pkey,
                                           STACK_OF(X509) **pother,
                                           UI_METHOD *ui_method,
                                           void *callback_data);
/*-
 * These callback types are for an ENGINE's handler for cipher and digest logic.
 * These handlers have these prototypes;
 *   int foo(ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid);
 *   int foo(ENGINE *e, const EVP_MD **digest, const int **nids, int nid);
 * Looking at how to implement these handlers in the case of cipher support, if
 * the framework wants the EVP_CIPHER for 'nid', it will call;
 *   foo(e, &p_evp_cipher, NULL, nid);    (return zero for failure)
 * If the framework wants a list of supported 'nid's, it will call;
 *   foo(e, NULL, &p_nids, 0); (returns number of 'nids' or -1 for error)
 */
/*
 * Returns to a pointer to the array of supported cipher 'nid's. If the
 * second parameter is non-NULL it is set to the size of the returned array.
 */
typedef int (*ENGINE_CIPHERS_PTR) (ENGINE *, const EVP_CIPHER **,
                                   const int **, int);
typedef int (*ENGINE_DIGESTS_PTR) (ENGINE *, const EVP_MD **, const int **,
                                   int);
typedef int (*ENGINE_PKEY_METHS_PTR) (ENGINE *, EVP_PKEY_METHOD **,
                                      const int **, int);
typedef int (*ENGINE_PKEY_ASN1_METHS_PTR) (ENGINE *, EVP_PKEY_ASN1_METHOD **,
                                           const int **, int);
/*
 * STRUCTURE functions ... all of these functions deal with pointers to
 * ENGINE structures where the pointers have a "structural reference". This
 * means that their reference is to allowed access to the structure but it
 * does not imply that the structure is functional. To simply increment or
 * decrement the structural reference count, use ENGINE_by_id and
 * ENGINE_free. NB: This is not required when iterating using ENGINE_get_next
 * as it will automatically decrement the structural reference count of the
 * "current" ENGINE and increment the structural reference count of the
 * ENGINE it returns (unless it is NULL).
 */

/* Get the first/last "ENGINE" type available. */
ENGINE *ENGINE_get_first(void);
ENGINE *ENGINE_get_last(void);
/* Iterate to the next/previous "ENGINE" type (NULL = end of the list). */
ENGINE *ENGINE_get_next(ENGINE *e);
ENGINE *ENGINE_get_prev(ENGINE *e);
/* Add another "ENGINE" type into the array. */
int ENGINE_add(ENGINE *e);
/* Remove an existing "ENGINE" type from the array. */
int ENGINE_remove(ENGINE *e);
/* Retrieve an engine from the list by its unique "id" value. */
ENGINE *ENGINE_by_id(const char *id);

#if OPENSSL_API_COMPAT < 0x10100000L
# define ENGINE_load_openssl() \
    OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_OPENSSL, NULL)
# define ENGINE_load_dynamic() \
    OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_DYNAMIC, NULL)
# ifndef OPENSSL_NO_STATIC_ENGINE
#  define ENGINE_load_padlock() \
    OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_PADLOCK, NULL)
#  define ENGINE_load_capi() \
    OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_CAPI, NULL)
#  define ENGINE_load_afalg() \
    OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_AFALG, NULL)
# endif
# define ENGINE_load_cryptodev() \
    OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_CRYPTODEV, NULL)
# define ENGINE_load_rdrand() \
    OPENSSL_init_crypto(OPENSSL_INIT_ENGINE_RDRAND, NULL)
#endif
void ENGINE_load_builtin_engines(void);

/*
 * Get and set global flags (ENGINE_TABLE_FLAG_***) for the implementation
 * "registry" handling.
 */
unsigned int ENGINE_get_table_flags(void);
void ENGINE_set_table_flags(unsigned int flags);

/*- Manage registration of ENGINEs per "table". For each type, there are 3
 * functions;
 *   ENGINE_register_***(e) - registers the implementation from 'e' (if it has one)
 *   ENGINE_unregister_***(e) - unregister the implementation from 'e'
 *   ENGINE_register_all_***() - call ENGINE_register_***() for each 'e' in the list
 * Cleanup is automatically registered from each table when required.
 */

int ENGINE_register_RSA(ENGINE *e);
void ENGINE_unregister_RSA(ENGINE *e);
void ENGINE_register_all_RSA(void);

int ENGINE_register_DSA(ENGINE *e);
void ENGINE_unregister_DSA(ENGINE *e);
void ENGINE_register_all_DSA(void);

int ENGINE_register_EC(ENGINE *e);
void ENGINE_unregister_EC(ENGINE *e);
void ENGINE_register_all_EC(void);

int ENGINE_register_DH(ENGINE *e);
void ENGINE_unregister_DH(ENGINE *e);
void ENGINE_register_all_DH(void);

int ENGINE_register_RAND(ENGINE *e);
void ENGINE_unregister_RAND(ENGINE *e);
void ENGINE_register_all_RAND(void);

int ENGINE_register_ciphers(ENGINE *e);
void ENGINE_unregister_ciphers(ENGINE *e);
void ENGINE_register_all_ciphers(void);

int ENGINE_register_digests(ENGINE *e);
void ENGINE_unregister_digests(ENGINE *e);
void ENGINE_register_all_digests(void);

int ENGINE_register_pkey_meths(ENGINE *e);
void ENGINE_unregister_pkey_meths(ENGINE *e);
void ENGINE_register_all_pkey_meths(void);

int ENGINE_register_pkey_asn1_meths(ENGINE *e);
void ENGINE_unregister_pkey_asn1_meths(ENGINE *e);
void ENGINE_register_all_pkey_asn1_meths(void);

/*
 * These functions register all support from the above categories. Note, use
 * of these functions can result in static linkage of code your application
 * may not need. If you only need a subset of functionality, consider using
 * more selective initialisation.
 */
int ENGINE_register_complete(ENGINE *e);
int ENGINE_register_all_complete(void);

/*
 * Send parameterised control commands to the engine. The possibilities to
 * send down an integer, a pointer to data or a function pointer are
 * provided. Any of the parameters may or may not be NULL, depending on the
 * command number. In actuality, this function only requires a structural
 * (rather than functional) reference to an engine, but many control commands
 * may require the engine be functional. The caller should be aware of trying
 * commands that require an operational ENGINE, and only use functional
 * references in such situations.
 */
int ENGINE_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f) (void));

/*
 * This function tests if an ENGINE-specific command is usable as a
 * "setting". Eg. in an application's config file that gets processed through
 * ENGINE_ctrl_cmd_string(). If this returns zero, it is not available to
 * ENGINE_ctrl_cmd_string(), only ENGINE_ctrl().
 */
int ENGINE_cmd_is_executable(ENGINE *e, int cmd);

/*
 * This function works like ENGINE_ctrl() with the exception of taking a
 * command name instead of a command number, and can handle optional
 * commands. See the comment on ENGINE_ctrl_cmd_string() for an explanation
 * on how to use the cmd_name and cmd_optional.
 */
int ENGINE_ctrl_cmd(ENGINE *e, const char *cmd_name,
                    long i, void *p, void (*f) (void), int cmd_optional);

/*
 * This function passes a command-name and argument to an ENGINE. The
 * cmd_name is converted to a command number and the control command is
 * called using 'arg' as an argument (unless the ENGINE doesn't support such
 * a command, in which case no control command is called). The command is
 * checked for input flags, and if necessary the argument will be converted
 * to a numeric value. If cmd_optional is non-zero, then if the ENGINE
 * doesn't support the given cmd_name the return value will be success
 * anyway. This function is intended for applications to use so that users
 * (or config files) can supply engine-specific config data to the ENGINE at
 * run-time to control behaviour of specific engines. As such, it shouldn't
 * be used for calling ENGINE_ctrl() functions that return data, deal with
 * binary data, or that are otherwise supposed to be used directly through
 * ENGINE_ctrl() in application code. Any "return" data from an ENGINE_ctrl()
 * operation in this function will be lost - the return value is interpreted
 * as failure if the return value is zero, success otherwise, and this
 * function returns a boolean value as a result. In other words, vendors of
 * 'ENGINE'-enabled devices should write ENGINE implementations with
 * parameterisations that work in this scheme, so that compliant ENGINE-based
 * applications can work consistently with the same configuration for the
 * same ENGINE-enabled devices, across applications.
 */
int ENGINE_ctrl_cmd_string(ENGINE *e, const char *cmd_name, const char *arg,
                           int cmd_optional);

/*
 * These functions are useful for manufacturing new ENGINE structures. They
 * don't address reference counting at all - one uses them to populate an
 * ENGINE structure with personalised implementations of things prior to
 * using it directly or adding it to the builtin ENGINE list in OpenSSL.
 * These are also here so that the ENGINE structure doesn't have to be
 * exposed and break binary compatibility!
 */
ENGINE *ENGINE_new(void);
int ENGINE_free(ENGINE *e);
int ENGINE_up_ref(ENGINE *e);
int ENGINE_set_id(ENGINE *e, const char *id);
int ENGINE_set_name(ENGINE *e, const char *name);
int ENGINE_set_RSA(ENGINE *e, const RSA_METHOD *rsa_meth);
int ENGINE_set_DSA(ENGINE *e, const DSA_METHOD *dsa_meth);
int ENGINE_set_EC(ENGINE *e, const EC_KEY_METHOD *ecdsa_meth);
int ENGINE_set_DH(ENGINE *e, const DH_METHOD *dh_meth);
int ENGINE_set_RAND(ENGINE *e, const RAND_METHOD *rand_meth);
int ENGINE_set_destroy_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR destroy_f);
int ENGINE_set_init_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR init_f);
int ENGINE_set_finish_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR finish_f);
int ENGINE_set_ctrl_function(ENGINE *e, ENGINE_CTRL_FUNC_PTR ctrl_f);
int ENGINE_set_load_privkey_function(ENGINE *e,
                                     ENGINE_LOAD_KEY_PTR loadpriv_f);
int ENGINE_set_load_pubkey_function(ENGINE *e, ENGINE_LOAD_KEY_PTR loadpub_f);
int ENGINE_set_load_ssl_client_cert_function(ENGINE *e,
                                             ENGINE_SSL_CLIENT_CERT_PTR
                                             loadssl_f);
int ENGINE_set_ciphers(ENGINE *e, ENGINE_CIPHERS_PTR f);
int ENGINE_set_digests(ENGINE *e, ENGINE_DIGESTS_PTR f);
int ENGINE_set_pkey_meths(ENGINE *e, ENGINE_PKEY_METHS_PTR f);
int ENGINE_set_pkey_asn1_meths(ENGINE *e, ENGINE_PKEY_ASN1_METHS_PTR f);
int ENGINE_set_flags(ENGINE *e, int flags);
int ENGINE_set_cmd_defns(ENGINE *e, const ENGINE_CMD_DEFN *defns);
/* These functions allow control over any per-structure ENGINE data. */
#define ENGINE_get_ex_new_index(l, p, newf, dupf, freef) \
    CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_ENGINE, l, p, newf, dupf, freef)
int ENGINE_set_ex_data(ENGINE *e, int idx, void *arg);
void *ENGINE_get_ex_data(const ENGINE *e, int idx);

#if OPENSSL_API_COMPAT < 0x10100000L
/*
 * This function previously cleaned up anything that needs it. Auto-deinit will
 * now take care of it so it is no longer required to call this function.
 */
# define ENGINE_cleanup() while(0) continue
#endif

/*
 * These return values from within the ENGINE structure. These can be useful
 * with functional references as well as structural references - it depends
 * which you obtained. Using the result for functional purposes if you only
 * obtained a structural reference may be problematic!
 */
const char *ENGINE_get_id(const ENGINE *e);
const char *ENGINE_get_name(const ENGINE *e);
const RSA_METHOD *ENGINE_get_RSA(const ENGINE *e);
const DSA_METHOD *ENGINE_get_DSA(const ENGINE *e);
const EC_KEY_METHOD *ENGINE_get_EC(const ENGINE *e);
const DH_METHOD *ENGINE_get_DH(const ENGINE *e);
const RAND_METHOD *ENGINE_get_RAND(const ENGINE *e);
ENGINE_GEN_INT_FUNC_PTR ENGINE_get_destroy_function(const ENGINE *e);
ENGINE_GEN_INT_FUNC_PTR ENGINE_get_init_function(const ENGINE *e);
ENGINE_GEN_INT_FUNC_PTR ENGINE_get_finish_function(const ENGINE *e);
ENGINE_CTRL_FUNC_PTR ENGINE_get_ctrl_function(const ENGINE *e);
ENGINE_LOAD_KEY_PTR ENGINE_get_load_privkey_function(const ENGINE *e);
ENGINE_LOAD_KEY_PTR ENGINE_get_load_pubkey_function(const ENGINE *e);
ENGINE_SSL_CLIENT_CERT_PTR ENGINE_get_ssl_client_cert_function(const ENGINE
                                                               *e);
ENGINE_CIPHERS_PTR ENGINE_get_ciphers(const ENGINE *e);
ENGINE_DIGESTS_PTR ENGINE_get_digests(const ENGINE *e);
ENGINE_PKEY_METHS_PTR ENGINE_get_pkey_meths(const ENGINE *e);
ENGINE_PKEY_ASN1_METHS_PTR ENGINE_get_pkey_asn1_meths(const ENGINE *e);
const EVP_CIPHER *ENGINE_get_cipher(ENGINE *e, int nid);
const EVP_MD *ENGINE_get_digest(ENGINE *e, int nid);
const EVP_PKEY_METHOD *ENGINE_get_pkey_meth(ENGINE *e, int nid);
const EVP_PKEY_ASN1_METHOD *ENGINE_get_pkey_asn1_meth(ENGINE *e, int nid);
const EVP_PKEY_ASN1_METHOD *ENGINE_get_pkey_asn1_meth_str(ENGINE *e,
                                                          const char *str,
                                                          int len);
const EVP_PKEY_ASN1_METHOD *ENGINE_pkey_asn1_find_str(ENGINE **pe,
                                                      const char *str,
                                                      int len);
const ENGINE_CMD_DEFN *ENGINE_get_cmd_defns(const ENGINE *e);
int ENGINE_get_flags(const ENGINE *e);

/*
 * FUNCTIONAL functions. These functions deal with ENGINE structures that
 * have (or will) be initialised for use. Broadly speaking, the structural
 * functions are useful for iterating the list of available engine types,
 * creating new engine types, and other "list" operations. These functions
 * actually deal with ENGINEs that are to be used. As such these functions
 * can fail (if applicable) when particular engines are unavailable - eg. if
 * a hardware accelerator is not attached or not functioning correctly. Each
 * ENGINE has 2 reference counts; structural and functional. Every time a
 * functional reference is obtained or released, a corresponding structural
 * reference is automatically obtained or released too.
 */

/*
 * Initialise a engine type for use (or up its reference count if it's
 * already in use). This will fail if the engine is not currently operational
 * and cannot initialise.
 */
int ENGINE_init(ENGINE *e);
/*
 * Free a functional reference to a engine type. This does not require a
 * corresponding call to ENGINE_free as it also releases a structural
 * reference.
 */
int ENGINE_finish(ENGINE *e);

/*
 * The following functions handle keys that are stored in some secondary
 * location, handled by the engine.  The storage may be on a card or
 * whatever.
 */
EVP_PKEY *ENGINE_load_private_key(ENGINE *e, const char *key_id,
                                  UI_METHOD *ui_method, void *callback_data);
EVP_PKEY *ENGINE_load_public_key(ENGINE *e, const char *key_id,
                                 UI_METHOD *ui_method, void *callback_data);
int ENGINE_load_ssl_client_cert(ENGINE *e, SSL *s,
                                STACK_OF(X509_NAME) *ca_dn, X509 **pcert,
                                EVP_PKEY **ppkey, STACK_OF(X509) **pother,
                                UI_METHOD *ui_method, void *callback_data);

/*
 * This returns a pointer for the current ENGINE structure that is (by
 * default) performing any RSA operations. The value returned is an
 * incremented reference, so it should be free'd (ENGINE_finish) before it is
 * discarded.
 */
ENGINE *ENGINE_get_default_RSA(void);
/* Same for the other "methods" */
ENGINE *ENGINE_get_default_DSA(void);
ENGINE *ENGINE_get_default_EC(void);
ENGINE *ENGINE_get_default_DH(void);
ENGINE *ENGINE_get_default_RAND(void);
/*
 * These functions can be used to get a functional reference to perform
 * ciphering or digesting corresponding to "nid".
 */
ENGINE *ENGINE_get_cipher_engine(int nid);
ENGINE *ENGINE_get_digest_engine(int nid);
ENGINE *ENGINE_get_pkey_meth_engine(int nid);
ENGINE *ENGINE_get_pkey_asn1_meth_engine(int nid);

/*
 * This sets a new default ENGINE structure for performing RSA operations. If
 * the result is non-zero (success) then the ENGINE structure will have had
 * its reference count up'd so the caller should still free their own
 * reference 'e'.
 */
int ENGINE_set_default_RSA(ENGINE *e);
int ENGINE_set_default_string(ENGINE *e, const char *def_list);
/* Same for the other "methods" */
int ENGINE_set_default_DSA(ENGINE *e);
int ENGINE_set_default_EC(ENGINE *e);
int ENGINE_set_default_DH(ENGINE *e);
int ENGINE_set_default_RAND(ENGINE *e);
int ENGINE_set_default_ciphers(ENGINE *e);
int ENGINE_set_default_digests(ENGINE *e);
int ENGINE_set_default_pkey_meths(ENGINE *e);
int ENGINE_set_default_pkey_asn1_meths(ENGINE *e);

/*
 * The combination "set" - the flags are bitwise "OR"d from the
 * ENGINE_METHOD_*** defines above. As with the "ENGINE_register_complete()"
 * function, this function can result in unnecessary static linkage. If your
 * application requires only specific functionality, consider using more
 * selective functions.
 */
int ENGINE_set_default(ENGINE *e, unsigned int flags);

void ENGINE_add_conf_module(void);

/* Deprecated functions ... */
/* int ENGINE_clear_defaults(void); */

/**************************/
/* DYNAMIC ENGINE SUPPORT */
/**************************/

/* Binary/behaviour compatibility levels */
# define OSSL_DYNAMIC_VERSION            (unsigned long)0x00030000
/*
 * Binary versions older than this are too old for us (whether we're a loader
 * or a loadee)
 */
# define OSSL_DYNAMIC_OLDEST             (unsigned long)0x00030000

/*
 * When compiling an ENGINE entirely as an external shared library, loadable
 * by the "dynamic" ENGINE, these types are needed. The 'dynamic_fns'
 * structure type provides the calling application's (or library's) error
 * functionality and memory management function pointers to the loaded
 * library. These should be used/set in the loaded library code so that the
 * loading application's 'state' will be used/changed in all operations. The
 * 'static_state' pointer allows the loaded library to know if it shares the
 * same static data as the calling application (or library), and thus whether
 * these callbacks need to be set or not.
 */
typedef void *(*dyn_MEM_malloc_fn) (size_t, const char *, int);
typedef void *(*dyn_MEM_realloc_fn) (void *, size_t, const char *, int);
typedef void (*dyn_MEM_free_fn) (void *, const char *, int);
typedef struct st_dynamic_MEM_fns {
    dyn_MEM_malloc_fn malloc_fn;
    dyn_MEM_realloc_fn realloc_fn;
    dyn_MEM_free_fn free_fn;
} dynamic_MEM_fns;
/*
 * FIXME: Perhaps the memory and locking code (crypto.h) should declare and
 * use these types so we (and any other dependent code) can simplify a bit??
 */
/* The top-level structure */
typedef struct st_dynamic_fns {
    void *static_state;
    dynamic_MEM_fns mem_fns;
} dynamic_fns;

/*
 * The version checking function should be of this prototype. NB: The
 * ossl_version value passed in is the OSSL_DYNAMIC_VERSION of the loading
 * code. If this function returns zero, it indicates a (potential) version
 * incompatibility and the loaded library doesn't believe it can proceed.
 * Otherwise, the returned value is the (latest) version supported by the
 * loading library. The loader may still decide that the loaded code's
 * version is unsatisfactory and could veto the load. The function is
 * expected to be implemented with the symbol name "v_check", and a default
 * implementation can be fully instantiated with
 * IMPLEMENT_DYNAMIC_CHECK_FN().
 */
typedef unsigned long (*dynamic_v_check_fn) (unsigned long ossl_version);
# define IMPLEMENT_DYNAMIC_CHECK_FN() \
        OPENSSL_EXPORT unsigned long v_check(unsigned long v); \
        OPENSSL_EXPORT unsigned long v_check(unsigned long v) { \
                if (v >= OSSL_DYNAMIC_OLDEST) return OSSL_DYNAMIC_VERSION; \
                return 0; }

/*
 * This function is passed the ENGINE structure to initialise with its own
 * function and command settings. It should not adjust the structural or
 * functional reference counts. If this function returns zero, (a) the load
 * will be aborted, (b) the previous ENGINE state will be memcpy'd back onto
 * the structure, and (c) the shared library will be unloaded. So
 * implementations should do their own internal cleanup in failure
 * circumstances otherwise they could leak. The 'id' parameter, if non-NULL,
 * represents the ENGINE id that the loader is looking for. If this is NULL,
 * the shared library can choose to return failure or to initialise a
 * 'default' ENGINE. If non-NULL, the shared library must initialise only an
 * ENGINE matching the passed 'id'. The function is expected to be
 * implemented with the symbol name "bind_engine". A standard implementation
 * can be instantiated with IMPLEMENT_DYNAMIC_BIND_FN(fn) where the parameter
 * 'fn' is a callback function that populates the ENGINE structure and
 * returns an int value (zero for failure). 'fn' should have prototype;
 * [static] int fn(ENGINE *e, const char *id);
 */
typedef int (*dynamic_bind_engine) (ENGINE *e, const char *id,
                                    const dynamic_fns *fns);
# define IMPLEMENT_DYNAMIC_BIND_FN(fn) \
        OPENSSL_EXPORT \
        int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns); \
        OPENSSL_EXPORT \
        int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns) { \
            if (ENGINE_get_static_state() == fns->static_state) goto skip_cbs; \
            CRYPTO_set_mem_functions(fns->mem_fns.malloc_fn, \
                                     fns->mem_fns.realloc_fn, \
                                     fns->mem_fns.free_fn); \
            OPENSSL_init_crypto(OPENSSL_INIT_NO_ATEXIT, NULL); \
        skip_cbs: \
            if (!fn(e, id)) return 0; \
            return 1; }

/*
 * If the loading application (or library) and the loaded ENGINE library
 * share the same static data (eg. they're both dynamically linked to the
 * same libcrypto.so) we need a way to avoid trying to set system callbacks -
 * this would fail, and for the same reason that it's unnecessary to try. If
 * the loaded ENGINE has (or gets from through the loader) its own copy of
 * the libcrypto static data, we will need to set the callbacks. The easiest
 * way to detect this is to have a function that returns a pointer to some
 * static data and let the loading application and loaded ENGINE compare
 * their respective values.
 */
void *ENGINE_get_static_state(void);

# if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(__DragonFly__)
DEPRECATEDIN_1_1_0(void ENGINE_setup_bsd_cryptodev(void))
# endif

#  ifdef  __cplusplus
}
#  endif
# endif
#endif

Back