#$@%#$%!

Ngiler SH3LL 360
: / lib / dracut / modules.d / 40network /

Information Server
MySQL : OFF Perl : OFF CURL : ON WGET : OFF PKEXEC : OFF

Directive	Local Value
IP Address	162.0.209.101
System	Linux premium169.web-hosting.com 4.18.0-553.50.1.lve.el8.x86_64 #1 SMP Thu Apr 17 19:10:24 UTC 2025 x86_64
User	luxeelil
PHP Version	8.0.30
Software	LiteSpeed
Doc root	Writable

Edit File : net-lib.sh \| Size : 25.09 KB
#!/bin/sh is_ip() { echo "$1" \| { IFS=. read a b c d test "$a" -ge 0 -a "$a" -le 255 \ -a "$b" -ge 0 -a "$b" -le 255 \ -a "$c" -ge 0 -a "$c" -le 255 \ -a "$d" -ge 0 -a "$d" -le 255 \ 2> /dev/null } && return 0 return 1 } get_ip() { local iface="$1" ip="" ip=$(ip -o -f inet addr show $iface) ip=${ip%%/} ip=${ip## } echo $ip } iface_for_remote_addr() { set -- $(ip -o route get to $1) echo $5 } iface_for_ip() { set -- $(ip -o addr show to $1) echo $2 } iface_for_mac() { local interface="" mac="$(echo $1 \| sed 'y/ABCDEF/abcdef/')" for interface in /sys/class/net/; do if [ $(cat $interface/address) = "$mac" ]; then echo ${interface##/} fi done } # get the iface name for the given identifier - either a MAC, IP, or iface name iface_name() { case $1 in ??:??:??:??:??:??\|??-??-??-??-??-??) iface_for_mac $1 ;; ::\|...) iface_for_ip $1 ;; ) echo $1 ;; esac } # list the configured interfaces configured_ifaces() { local IFACES="" iface_id="" rv=1 [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces if { pidof udevd \|\| pidof systemd-udevd; } > /dev/null; then for iface_id in $IFACES; do echo $(iface_name $iface_id) rv=0 done else warn "configured_ifaces called before udev is running" echo $IFACES [ -n "$IFACES" ] && rv=0 fi return $rv } all_ifaces_up() { local iface="" IFACES="" [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces for iface in $IFACES; do [ -e /tmp/net.$iface.up ] \|\| return 1 done } all_ifaces_setup() { local iface="" IFACES="" [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces for iface in $IFACES; do [ -e /tmp/net.$iface.did-setup ] \|\| return 1 done } get_netroot_ip() { local prefix="" server="" rest="" splitsep "$1" ":" prefix server rest case $server in [0-9]\.[0-9]\.[0-9]\.[0-9]) echo "$server"; return 0 ;; esac return 1 } ip_is_local() { strstr "$(ip route get $1 2>/dev/null)" " via " } ifdown() { local netif="$1" # ip down/flush ensures that routing info goes away as well ip link set $netif down ip addr flush dev $netif echo "#empty" > /etc/resolv.conf rm -f -- /tmp/net.$netif.did-setup [ -z "$DO_VLAN" ] && \ [ -e /sys/class/net/$netif/address ] && \ rm -f -- /tmp/net.$(cat /sys/class/net/$netif/address).did-setup # TODO: send "offline" uevent? } setup_net() { local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES="" local _p [ -e /tmp/net.$netif.did-setup ] && return [ -z "$DO_VLAN" ] && \ [ -e /sys/class/net/$netif/address ] && \ [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && return [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces [ -z "$IFACES" ] && IFACES="$netif" # run the scripts written by ifup [ -e /tmp/net.$netif.hostname ] && . /tmp/net.$netif.hostname [ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts # set up resolv.conf [ -e /tmp/net.$netif.resolv.conf ] && \ awk '!array[$0]++' /tmp/net.$netif.resolv.conf > /etc/resolv.conf [ -e /tmp/net.$netif.gw ] && . /tmp/net.$netif.gw # add static route for _p in $(getargs rd.route); do route_to_var "$_p" \|\| continue [ -n "$route_dev" ] && [ "$route_dev" != "$netif" ] && continue ip route add "$route_mask" ${route_gw:+via "$route_gw"} ${route_dev:+dev "$route_dev"} if strstr "$route_mask" ":"; then printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \ > /tmp/net.route6."$netif" else printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \ > /tmp/net.route."$netif" fi done # If a static route was necessary to reach the gateway, the # first gateway setup call will have failed with # RTNETLINK answers: Network is unreachable # Replace the default route again after static routes to cover # this scenario. [ -e /tmp/net.$netif.gw ] && . /tmp/net.$netif.gw # Handle STP Timeout: arping the default gateway. # (or the root server, if a) it's local or b) there's no gateway.) # Note: This assumes that if no router is present the # root server is on the same subnet. # Get DHCP-provided router IP, or the cmdline-provided "gw=" argument [ -n "$new_routers" ] && gw_ip=${new_routers%%,} [ -n "$gw" ] && gw_ip=$gw # Get the "netroot" IP (if there's an IP address in there) netroot_ip=$(get_netroot_ip $netroot) # try netroot if it's local (or there's no gateway) if ip_is_local $netroot_ip \|\| [ -z "$gw_ip" ]; then dest="$netroot_ip" else dest="$gw_ip" fi unset layer2 if [ -f /sys/class/net/$netif/device/layer2 ]; then read layer2 < /sys/class/net/$netif/device/layer2 fi if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! strstr "$dest" ":"; then if command -v arping2 >/dev/null; then arping2 -q -C 1 -c 60 -I $netif $dest \|\| info "Resolving $dest via ARP on $netif failed" else arping -q -f -w 60 -I $netif $dest \|\| info "Resolving $dest via ARP on $netif failed" fi fi unset layer2 > /tmp/net.$netif.did-setup [ -z "$DO_VLAN" ] && \ [ -e /sys/class/net/$netif/address ] && \ > /tmp/net.$(cat /sys/class/net/$netif/address).did-setup } save_netinfo() { local netif="$1" IFACES="" f="" i="" [ -e /tmp/net.ifaces ] && read IFACES < /tmp/net.ifaces # Add $netif to the front of IFACES (if it's not there already). set -- "$netif" for i in $IFACES; do [ "$i" != "$netif" ] && set -- "$@" "$i"; done IFACES="$" for i in $IFACES; do for f in /tmp/dhclient.$i.; do [ -f $f ] && cp -f $f /tmp/net.${f#/tmp/dhclient.} done done echo $IFACES > /tmp/.net.ifaces.new mv /tmp/.net.ifaces.new /tmp/net.ifaces } set_ifname() { local name="$1" mac="$2" num=-1 n="" # if it's already set, return the existing name for n in $(getargs ifname=); do strstr "$n" "$mac" && echo ${n%%:} && return done # otherwise, pick a new name and use that while :; do num=$(($num+1)); [ -e /sys/class/net/$name$num ] && continue for n in $(getargs ifname=); do [ "$name$num" = "${n%%:}" ] && continue 2 done break done echo "ifname=$name$num:$mac" >> /etc/cmdline.d/45-ifname.conf echo "$name$num" } # pxelinux provides macaddr '-' separated, but we need ':' fix_bootif() { local macaddr=${1} local IFS='-' macaddr=$(printf '%s:' ${macaddr}) macaddr=${macaddr%:} # strip hardware type field from pxelinux [ -n "${macaddr%??:??:??:??:??:??}" ] && macaddr=${macaddr#??:} # return macaddr with lowercase alpha characters expected by udev echo $macaddr \| sed 'y/ABCDEF/abcdef/' } ibft_to_cmdline() { local iface="" modprobe -q iscsi_ibft ( for iface in /sys/firmware/ibft/ethernet; do local mac="" dev="" local dhcp="" ip="" gw="" mask="" hostname="" local dns1 dns2 [ -e ${iface}/mac ] \|\| continue mac=$(read a < ${iface}/mac; echo $a) [ -z "$mac" ] && continue dev=$(set_ifname ibft $mac) [ -e /tmp/net.${dev}.has_ibft_config ] && continue [ -e ${iface}/flags ] && flags=$(read a < ${iface}/flags; echo $a) # Skip invalid interfaces (( $flags & 1 )) \|\| continue # Skip interfaces not used for booting unless using multipath if ! getargbool 0 rd.iscsi.mp ; then (( $flags & 2 )) \|\| continue fi [ -e ${iface}/dhcp ] && dhcp=$(read a < ${iface}/dhcp; echo $a) [ -e ${iface}/origin ] && origin=$(read a < ${iface}/origin; echo $a) [ -e ${iface}/ip-addr ] && ip=$(read a < ${iface}/ip-addr; echo $a) if [ -n "$ip" ] ; then case "$ip" in ...) family=ipv4 ;; :) family=ipv6 ;; esac fi if [ -n "$dhcp" ] \|\| [ "$origin" -eq 3 ]; then if [ "$family" = "ipv6" ] ; then echo "ip=$dev:dhcp6" else echo "ip=$dev:dhcp" fi elif [ -e ${iface}/ip-addr ]; then # skip not assigned ip adresses [ "$ip" = "0.0.0.0" ] && continue [ -e ${iface}/gateway ] && gw=$(read a < ${iface}/gateway; echo $a) [ "$gateway" = "0.0.0.0" ] && unset $gateway [ -e ${iface}/subnet-mask ] && mask=$(read a < ${iface}/subnet-mask; echo $a) [ -e ${iface}/prefix-len ] && prefix=$(read a < ${iface}/prefix-len; echo $a) [ -e ${iface}/primary-dns ] && dns1=$(read a < ${iface}/primary-dns; echo $a) [ "$dns1" = "0.0.0.0" ] && unset $dns1 [ -e ${iface}/secondary-dns ] && dns2=$(read a < ${iface}/secondary-dns; echo $a) [ "$dns2" = "0.0.0.0" ] && unset $dns2 [ -e ${iface}/hostname ] && hostname=$(read a < ${iface}/hostname; echo $a) if [ "$family" = "ipv6" ] ; then if [ -n "$ip" ] ; then ip="[$ip]" [ -n "$prefix" ] \|\| prefix=64 ip="[${ip}/${prefix}]" mask= fi if [ -n "$gw" ] ; then gw="[${gw}]" fi fi if [ -n "$ip" ] && [ -n "$mask" -o -n "$prefix" ]; then echo "ip=$ip::$gw:$mask:$hostname:$dev:none${dns1:+:$dns1}${dns2:+:$dns2}" else warn "${iface} does not contain a valid iBFT configuration" warn "ip-addr=$ip" warn "gateway=$gw" warn "subnet-mask=$mask" warn "hostname=$hostname" fi else info "${iface} does not contain a valid iBFT configuration" ls -l ${iface} \| vinfo fi if [ -e ${iface}/vlan ]; then vlan=$(read a < ${iface}/vlan; echo $a) if [ "$vlan" -ne "0" ]; then case "$vlan" in [0-9]) echo "vlan=$dev.$vlan:$dev" echo $mac > /tmp/net.${dev}.${vlan}.has_ibft_config ;; ) echo "vlan=$vlan:$dev" echo $mac > /tmp/net.${vlan}.has_ibft_config ;; esac else echo $mac > /tmp/net.${dev}.has_ibft_config fi else echo $mac > /tmp/net.${dev}.has_ibft_config fi done ) >> /etc/cmdline.d/40-ibft.conf } parse_iscsi_root() { local v v=${1#iscsi:} # extract authentication info case "$v" in @::::) authinfo=${v%%@} v=${v#@} # allow empty authinfo to allow having an @ in iscsi_target_name like this: # netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk if [ -n "$authinfo" ]; then OLDIFS="$IFS" IFS=: set $authinfo IFS="$OLDIFS" if [ $# -gt 4 ]; then warn "Wrong authentication info in iscsi: parameter!" return 1 fi iscsi_username=$1 iscsi_password=$2 if [ $# -gt 2 ]; then iscsi_in_username=$3 iscsi_in_password=$4 fi fi ;; esac # extract target ip case "$v" in [[][]]:) iscsi_target_ip=${v#[[]} iscsi_target_ip=${iscsi_target_ip%%[]]} v=${v#[[]$iscsi_target_ip[]]:} ;; ) iscsi_target_ip=${v%%[:]} v=${v#$iscsi_target_ip:} ;; esac unset iscsi_target_name # extract target name case "$v" in :iqn.) iscsi_target_name=iqn.${v##:iqn.} v=${v%:iqn.}: ;; :eui.) iscsi_target_name=eui.${v##:eui.} v=${v%:eui.}: ;; :naa.) iscsi_target_name=naa.${v##:naa.} v=${v%:naa.}: ;; esac # parse the rest OLDIFS="$IFS" IFS=: set $v IFS="$OLDIFS" iscsi_protocol=$1; shift # ignored iscsi_target_port=$1; shift if [ -n "$iscsi_target_name" ]; then if [ $# -eq 3 ]; then iscsi_iface_name=$1; shift fi if [ $# -eq 2 ]; then iscsi_netdev_name=$1; shift fi iscsi_lun=$1; shift if [ $# -ne 0 ]; then warn "Invalid parameter in iscsi: parameter!" return 1 fi return 0 fi if [ $# -gt 3 ] && [ -n "$1$2" ]; then if [ -z "$3" ] \|\| [ "$3" -ge 0 ] 2>/dev/null ; then iscsi_iface_name=$1; shift iscsi_netdev_name=$1; shift fi fi iscsi_lun=$1; shift iscsi_target_name=$(printf "%s:" "$@") iscsi_target_name=${iscsi_target_name%:} } ip_to_var() { local v=${1}: local i set -- while [ -n "$v" ]; do if [ "${v#\[::\]:}" != "$v" ]; then # handle IPv6 address i="${v%%\]:}" i="${i##\[}" set -- "$@" "$i" v=${v#\[$i\]:} else set -- "$@" "${v%%:}" v=${v#:} fi done unset ip srv gw mask hostname dev autoconf macaddr mtu dns1 dns2 if [ $# -eq 0 ]; then autoconf="error" return 0 fi if [ $# -eq 1 ]; then # format: ip={dhcp\|on\|any\|dhcp6\|auto6\|either6} # or # ip=<ipv4-address> means anaconda-style static config argument cluster autoconf="$1" if strglob "$autoconf" "..."; then # ip=<ipv4-address> means anaconda-style static config argument cluster: # ip=<ip> gateway=<gw> netmask=<nm> hostname=<host> mtu=<mtu> # ksdevice={link\|bootif\|ibft\|<MAC>\|<ifname>} ip="$autoconf" gw=$(getarg gateway=) mask=$(getarg netmask=) hostname=$(getarg hostname=) dev=$(getarg ksdevice=) autoconf="none" mtu=$(getarg mtu=) # handle special values for ksdevice case "$dev" in bootif\|BOOTIF) dev=$(fix_bootif $(getarg BOOTIF=)) ;; link) dev="" ;; # FIXME: do something useful with this ibft) dev="" ;; # ignore - ibft is handled elsewhere esac fi return 0 fi if [ "$2" = "dhcp" -o "$2" = "on" -o "$2" = "any" -o "$2" = "dhcp6" -o "$2" = "auto6" -o "$2" = "either6" ]; then # format: ip=<interface>:{dhcp\|on\|any\|dhcp6\|auto6}[:[<mtu>][:<macaddr>]] [ -n "$1" ] && dev="$1" [ -n "$2" ] && autoconf="$2" [ -n "$3" ] && mtu=$3 if [ -z "$5" ]; then macaddr="$4" else macaddr="${4}:${5}:${6}:${7}:${8}:${9}" fi return 0 fi # format: ip=<client-IP>:[<peer>]:<gateway-IP>:<netmask>:<client_hostname>:<interface>:{none\|off\|dhcp\|on\|any\|dhcp6\|auto6\|ibft}:[:[<mtu>][:<macaddr>]] [ -n "$1" ] && ip=$1 [ -n "$2" ] && srv=$2 [ -n "$3" ] && gw=$3 [ -n "$4" ] && mask=$4 [ -n "$5" ] && hostname=$5 [ -n "$6" ] && dev=$6 [ -n "$7" ] && autoconf=$7 case "$8" in [0-9a-fA-F]:\|[0-9].[0-9].[0-9].[0-9]) dns1="$8" [ -n "$9" ] && dns2="$9" ;; [0-9]) mtu="$8" if [ -n "${9}" -a -z "${10}" ]; then macaddr="${9}" elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then macaddr="${9}:${10}:${11}:${12}:${13}:${14}" fi ;; ) if [ -n "${9}" -a -z "${10}" ]; then macaddr="${9}" elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then macaddr="${9}:${10}:${11}:${12}:${13}:${14}" fi ;; esac return 0 } route_to_var() { local v=${1}: local i set -- while [ -n "$v" ]; do if [ "${v#\[::\]:}" != "$v" ]; then # handle IPv6 address i="${v%%\]:}" i="${i##\[}" set -- "$@" "$i" v=${v#\[$i\]:} else set -- "$@" "${v%%:}" v=${v#:} fi done unset route_mask route_gw route_dev case $# in 2) [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2" return 0;; 3) [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"; [ -n "$3" ] && route_dev="$3" return 0;; ) return 1;; esac } parse_ifname_opts() { local IFS=: set $1 case $# in 7) ifname_if=$1 # udev requires MAC addresses to be lower case ifname_mac=$(echo $2:$3:$4:$5:$6:$7 \| sed 'y/ABCDEF/abcdef/') ;; 21) ifname_if=$1 # udev requires MAC addresses to be lower case ifname_mac=$(echo $2:$3:$4:$5:$6:$7:$8:$9:${10}:${11}:${12}:${13}:${14}:${15}:${16}:${17}:${18}:${19}:${20}:${21} \| sed 'y/ABCDEF/abcdef/') ;; ) die "Invalid arguments for ifname=" ;; esac case $ifname_if in eth[0-9]\|eth[0-9][0-9]\|eth[0-9][0-9][0-9]\|eth[0-9][0-9][0-9][0-9]) warn "ifname=$ifname_if uses the kernel name space for interfaces" warn "This can fail for multiple network interfaces and is discouraged!" warn "Please use a custom name like \"netboot\" or \"bluesocket\"" warn "or use biosdevname and no ifname= at all." ;; esac } # some network driver need long time to initialize, wait before it's ready. wait_for_if_link() { local cnt=0 local li local timeout="$(getargs rd.net.timeout.iflink=)" timeout=${timeout:-60} timeout=$(($timeout10)) while [ $cnt -lt $timeout ]; do li=$(ip -o link show dev $1 2>/dev/null) [ -n "$li" ] && return 0 sleep 0.1 cnt=$(($cnt+1)) done return 1 } wait_for_if_up() { local cnt=0 local li local timeout="$(getargs rd.net.timeout.ifup=)" timeout=${timeout:-20} timeout=$(($timeout10)) while [ $cnt -lt $timeout ]; do li=$(ip -o link show up dev $1) if [ -n "$li" ]; then case "$li" in \<UP) return 0;; \<,UP\>) return 0;; \<,UP,\>) return 0;; esac fi if strstr "$li" "LOWER_UP" \ && strstr "$li" "state UNKNOWN" \ && ! strstr "$li" "DORMANT"; then return 0 fi sleep 0.1 cnt=$(($cnt+1)) done return 1 } wait_for_route_ok() { local cnt=0 local timeout="$(getargs rd.net.timeout.route=)" timeout=${timeout:-20} timeout=$(($timeout10)) while [ $cnt -lt $timeout ]; do li=$(ip route show) [ -n "$li" ] && [ -z "${li##$1}" ] && return 0 sleep 0.1 cnt=$(($cnt+1)) done return 1 } wait_for_ipv6_dad_link() { local cnt=0 local timeout="$(getargs rd.net.timeout.ipv6dad=)" timeout=${timeout:-50} timeout=$(($timeout10)) while [ $cnt -lt $timeout ]; do [ -n "$(ip -6 addr show dev "$1" scope link)" ] \ && [ -z "$(ip -6 addr show dev "$1" scope link tentative)" ] \ && return 0 [ -n "$(ip -6 addr show dev "$1" scope link dadfailed)" ] \ && return 1 sleep 0.1 cnt=$(($cnt+1)) done return 1 } wait_for_ipv6_dad() { local cnt=0 local timeout="$(getargs rd.net.timeout.ipv6dad=)" timeout=${timeout:-50} timeout=$(($timeout10)) while [ $cnt -lt $timeout ]; do [ -n "$(ip -6 addr show dev "$1")" ] \ && [ -z "$(ip -6 addr show dev "$1" tentative)" ] \ && [ -n "$(ip -6 route list proto ra dev "$1" \| grep ^default)" ] \ && return 0 [ -n "$(ip -6 addr show dev "$1" dadfailed)" ] \ && return 1 sleep 0.1 cnt=$(($cnt+1)) done return 1 } wait_for_ipv6_auto() { local cnt=0 local timeout="$(getargs rd.net.timeout.ipv6auto=)" timeout=${timeout:-40} timeout=$(($timeout10)) while [ $cnt -lt $timeout ]; do [ -z "$(ip -6 addr show dev "$1" tentative)" ] \ && [ -n "$(ip -6 route list proto ra dev "$1" \| grep ^default)" ] \ && return 0 sleep 0.1 cnt=$(($cnt+1)) done return 1 } linkup() { wait_for_if_link $1 2>/dev/null\ && ip link set $1 up 2>/dev/null\ && wait_for_if_up $1 2>/dev/null } type hostname >/dev/null 2>&1 \|\| \ hostname() { cat /proc/sys/kernel/hostname } iface_has_carrier() { local cnt=0 local interface="$1" flags="" [ -n "$interface" ] \|\| return 2 interface="/sys/class/net/$interface" [ -d "$interface" ] \|\| return 2 local timeout="$(getargs rd.net.timeout.carrier=)" timeout=${timeout:-10} timeout=$(($timeout10)) linkup "$1" li=$(ip -o link show up dev $1) strstr "$li" "NO-CARRIER" && _no_carrier_flag=1 while [ $cnt -lt $timeout ]; do if [ -n "$_no_carrier_flag" ]; then li=$(ip -o link show up dev $1) # NO-CARRIER flag was cleared strstr "$li" "NO-CARRIER" \|\| return 0 elif ! [ -e "$interface/carrier" ]; then # sysfs not available and "NO-CARRIER" not displayed return 0 fi # double check the syscfs carrier flag [ -e "$interface/carrier" ] && [ "$(cat $interface/carrier)" = 1 ] && return 0 sleep 0.1 cnt=$(($cnt+1)) done return 1 } iface_has_link() { iface_has_carrier "$@" } iface_is_enslaved() { local _li _li=$(ip -o link show dev $1) strstr "$_li" " master " \|\| return 1 return 0 } find_iface_with_link() { local iface_path="" iface="" for iface_path in /sys/class/net/; do iface=${iface_path##/} str_starts "$iface" "lo" && continue if iface_has_link $iface; then echo "$iface" return 0 fi done return 1 } is_persistent_ethernet_name() { local _netif="$1" local _name_assign_type="0" [ -f "/sys/class/net/$_netif/name_assign_type" ] \ && _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type") # NET_NAME_ENUM 1 [ "$_name_assign_type" = "1" ] && return 1 # NET_NAME_PREDICTABLE 2 [ "$_name_assign_type" = "2" ] && return 0 case "$_netif" in # udev persistent interface names eno[0-9]\|eno[0-9][0-9]\|eno[0-9][0-9][0-9]) ;; ens[0-9]\|ens[0-9][0-9]\|ens[0-9][0-9][0-9]) ;; enp[0-9]s[0-9]\|enp[0-9][0-9]s[0-9]\|enp[0-9][0-9][0-9]s[0-9]) ;; enPp[0-9]s[0-9]\|enPp[0-9][0-9]s[0-9]\|enPp[0-9][0-9][0-9]s[0-9]) ;; # biosdevname em[0-9]\|em[0-9][0-9]\|em[0-9][0-9][0-9]) ;; p[0-9]p[0-9]\|p[0-9][0-9]p[0-9]\|p[0-9][0-9][0-9]p[0-9]) ;; ) return 1 esac return 0 } is_kernel_ethernet_name() { local _netif="$1" local _name_assign_type="1" if [ -e "/sys/class/net/$_netif/name_assign_type" ]; then _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type") case "$_name_assign_type" in 2\|3\|4) # NET_NAME_PREDICTABLE 2 # NET_NAME_USER 3 # NET_NAME_RENAMED 4 return 1 ;; 1\|) # NET_NAME_ENUM 1 return 0 ;; esac fi # fallback to error prone manual name check case "$_netif" in eth[0-9]\|eth[0-9][0-9]\|eth[0-9][0-9][0-9]) return 0 ;; ) return 1 esac } iface_get_subchannels() { local _netif local _subchannels _netif="$1" _subchannels=$({ for i in /sys/class/net/$_netif/device/cdev[0-9]; do [ -e $i ] \|\| continue channel=$(readlink -f $i) printf -- "%s" "${channel##*/}," done }) [ -n "$_subchannels" ] \|\| return 1 printf -- "%s" ${_subchannels%,} } Back

Edit File : net-lib.sh | Size : 25.09 KB

#!/bin/sh

is_ip() {
    echo "$1" | {
        IFS=. read a b c d
        test "$a" -ge 0 -a "$a" -le 255 \
             -a "$b" -ge 0 -a "$b" -le 255 \
             -a "$c" -ge 0 -a "$c" -le 255 \
             -a "$d" -ge 0 -a "$d" -le 255 \
             2> /dev/null
    } && return 0
    return 1
}

get_ip() {
    local iface="$1" ip=""
    ip=$(ip -o -f inet addr show $iface)
    ip=${ip%%/*}
    ip=${ip##* }
    echo $ip
}

iface_for_remote_addr() {
    set -- $(ip -o route get to $1)
    echo $5
}

iface_for_ip() {
    set -- $(ip -o addr show to $1)
    echo $2
}

iface_for_mac() {
    local interface="" mac="$(echo $1 | sed 'y/ABCDEF/abcdef/')"
    for interface in /sys/class/net/*; do
        if [ $(cat $interface/address) = "$mac" ]; then
            echo ${interface##*/}
        fi
    done
}

# get the iface name for the given identifier - either a MAC, IP, or iface name
iface_name() {
    case $1 in
        ??:??:??:??:??:??|??-??-??-??-??-??) iface_for_mac $1 ;;
        *:*:*|*.*.*.*) iface_for_ip $1 ;;
        *) echo $1 ;;
    esac
}

# list the configured interfaces
configured_ifaces() {
    local IFACES="" iface_id="" rv=1
    [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
    if { pidof udevd || pidof systemd-udevd; } > /dev/null; then
        for iface_id in $IFACES; do
            echo $(iface_name $iface_id)
            rv=0
        done
    else
        warn "configured_ifaces called before udev is running"
        echo $IFACES
        [ -n "$IFACES" ] && rv=0
    fi
    return $rv
}

all_ifaces_up() {
    local iface="" IFACES=""
    [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
    for iface in $IFACES; do
        [ -e /tmp/net.$iface.up ] || return 1
    done
}

all_ifaces_setup() {
    local iface="" IFACES=""
    [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
    for iface in $IFACES; do
        [ -e /tmp/net.$iface.did-setup ] || return 1
    done
}

get_netroot_ip() {
    local prefix="" server="" rest=""
    splitsep "$1" ":" prefix server rest
    case $server in
        [0-9]*\.[0-9]*\.[0-9]*\.[0-9]*) echo "$server"; return 0 ;;
    esac
    return 1
}

ip_is_local() {
    strstr "$(ip route get $1 2>/dev/null)" " via "
}

ifdown() {
    local netif="$1"
    # ip down/flush ensures that routing info goes away as well
    ip link set $netif down
    ip addr flush dev $netif
    echo "#empty" > /etc/resolv.conf
    rm -f -- /tmp/net.$netif.did-setup
    [ -z "$DO_VLAN" ] && \
	[ -e /sys/class/net/$netif/address ] && \
        rm -f -- /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
    # TODO: send "offline" uevent?
}

setup_net() {
    local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES=""
    local _p
    [ -e /tmp/net.$netif.did-setup ] && return
    [ -z "$DO_VLAN" ] && \
	[ -e /sys/class/net/$netif/address ] && \
        [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && return
    [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
    [ -z "$IFACES" ] && IFACES="$netif"
    # run the scripts written by ifup
    [ -e /tmp/net.$netif.hostname ]      && . /tmp/net.$netif.hostname
    [ -e /tmp/net.$netif.override ]      && . /tmp/net.$netif.override
    [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
    # set up resolv.conf
    [ -e /tmp/net.$netif.resolv.conf ] && \
        awk '!array[$0]++' /tmp/net.$netif.resolv.conf > /etc/resolv.conf
    [ -e /tmp/net.$netif.gw ]            && . /tmp/net.$netif.gw

# add static route
    for _p in $(getargs rd.route); do
        route_to_var "$_p" || continue
        [ -n "$route_dev" ] && [ "$route_dev" != "$netif" ] && continue
        ip route add "$route_mask" ${route_gw:+via "$route_gw"} ${route_dev:+dev "$route_dev"}
        if strstr "$route_mask" ":"; then
            printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
                > /tmp/net.route6."$netif"
        else
            printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
                > /tmp/net.route."$netif"
        fi
    done

# If a static route was necessary to reach the gateway, the
    # first gateway setup call will have failed with
    #     RTNETLINK answers: Network is unreachable
    # Replace the default route again after static routes to cover
    # this scenario.
    [ -e /tmp/net.$netif.gw ]            && . /tmp/net.$netif.gw

# Handle STP Timeout: arping the default gateway.
    # (or the root server, if a) it's local or b) there's no gateway.)
    # Note: This assumes that if no router is present the
    # root server is on the same subnet.

# Get DHCP-provided router IP, or the cmdline-provided "gw=" argument
    [ -n "$new_routers" ] && gw_ip=${new_routers%%,*}
    [ -n "$gw" ] && gw_ip=$gw

# Get the "netroot" IP (if there's an IP address in there)
    netroot_ip=$(get_netroot_ip $netroot)

# try netroot if it's local (or there's no gateway)
    if ip_is_local $netroot_ip || [ -z "$gw_ip" ]; then
        dest="$netroot_ip"
    else
        dest="$gw_ip"
    fi

unset layer2
    if [ -f /sys/class/net/$netif/device/layer2 ]; then
        read layer2 < /sys/class/net/$netif/device/layer2
    fi

if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! strstr "$dest" ":"; then
        if command -v arping2 >/dev/null; then
            arping2 -q -C 1 -c 60 -I $netif $dest || info "Resolving $dest via ARP on $netif failed"
        else
            arping -q -f -w 60 -I $netif $dest || info "Resolving $dest via ARP on $netif failed"
        fi
    fi
    unset layer2

> /tmp/net.$netif.did-setup
    [ -z "$DO_VLAN" ] && \
	[ -e /sys/class/net/$netif/address ] && \
        > /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
}

save_netinfo() {
    local netif="$1" IFACES="" f="" i=""
    [ -e /tmp/net.ifaces ] && read IFACES < /tmp/net.ifaces
    # Add $netif to the front of IFACES (if it's not there already).
    set -- "$netif"
    for i in $IFACES; do [ "$i" != "$netif" ] && set -- "$@" "$i"; done
    IFACES="$*"
    for i in $IFACES; do
        for f in /tmp/dhclient.$i.*; do
            [ -f $f ] && cp -f $f /tmp/net.${f#/tmp/dhclient.}
        done
    done
    echo $IFACES > /tmp/.net.ifaces.new
    mv /tmp/.net.ifaces.new /tmp/net.ifaces
}

set_ifname() {
    local name="$1" mac="$2" num=-1 n=""
    # if it's already set, return the existing name
    for n in $(getargs ifname=); do
        strstr "$n" "$mac" && echo ${n%%:*} && return
    done
    # otherwise, pick a new name and use that
    while :; do
        num=$(($num+1));
        [ -e /sys/class/net/$name$num ] && continue
        for n in $(getargs ifname=); do
            [ "$name$num" = "${n%%:*}" ] && continue 2
        done
        break
    done
    echo "ifname=$name$num:$mac" >> /etc/cmdline.d/45-ifname.conf
    echo "$name$num"
}

# pxelinux provides macaddr '-' separated, but we need ':'
fix_bootif() {
    local macaddr=${1}
    local IFS='-'
    macaddr=$(printf '%s:' ${macaddr})
    macaddr=${macaddr%:}
    # strip hardware type field from pxelinux
    [ -n "${macaddr%??:??:??:??:??:??}" ] && macaddr=${macaddr#??:}
    # return macaddr with lowercase alpha characters expected by udev
    echo $macaddr | sed 'y/ABCDEF/abcdef/'
}

ibft_to_cmdline() {
    local iface=""
    modprobe -q iscsi_ibft
    (
        for iface in /sys/firmware/ibft/ethernet*; do
            local mac="" dev=""
            local dhcp="" ip="" gw="" mask="" hostname=""
            local dns1 dns2

[ -e ${iface}/mac ] || continue
            mac=$(read a < ${iface}/mac; echo $a)
            [ -z "$mac" ] && continue
            dev=$(set_ifname ibft $mac)

[ -e /tmp/net.${dev}.has_ibft_config ] && continue

[ -e ${iface}/flags ] && flags=$(read a < ${iface}/flags; echo $a)
            # Skip invalid interfaces
            (( $flags & 1 )) || continue
            # Skip interfaces not used for booting unless using multipath
            if ! getargbool 0 rd.iscsi.mp ; then
                (( $flags & 2 )) || continue
            fi
            [ -e ${iface}/dhcp ] && dhcp=$(read a < ${iface}/dhcp; echo $a)
            [ -e ${iface}/origin ] && origin=$(read a < ${iface}/origin; echo $a)
            [ -e ${iface}/ip-addr ] && ip=$(read a < ${iface}/ip-addr; echo $a)

if [ -n "$ip" ] ; then
                case "$ip" in
                    *.*.*.*)
                        family=ipv4
                        ;;
                    *:*)
                        family=ipv6
                        ;;
                esac
            fi
            if [ -n "$dhcp" ] || [ "$origin" -eq 3 ]; then
                if [ "$family" = "ipv6" ] ; then
                    echo "ip=$dev:dhcp6"
                else
                    echo "ip=$dev:dhcp"
                fi
            elif [ -e ${iface}/ip-addr ]; then
                # skip not assigned ip adresses
                [ "$ip" = "0.0.0.0" ] && continue
                [ -e ${iface}/gateway ] && gw=$(read a < ${iface}/gateway; echo $a)
                [ "$gateway" = "0.0.0.0" ] && unset $gateway
                [ -e ${iface}/subnet-mask ] && mask=$(read a < ${iface}/subnet-mask; echo $a)
                [ -e ${iface}/prefix-len ] && prefix=$(read a < ${iface}/prefix-len; echo $a)
                [ -e ${iface}/primary-dns ] && dns1=$(read a < ${iface}/primary-dns; echo $a)
                [ "$dns1" = "0.0.0.0" ] && unset $dns1
                [ -e ${iface}/secondary-dns ] && dns2=$(read a < ${iface}/secondary-dns; echo $a)
                [ "$dns2" = "0.0.0.0" ] && unset $dns2
                [ -e ${iface}/hostname ] && hostname=$(read a < ${iface}/hostname; echo $a)
                if [ "$family" = "ipv6" ] ; then
                    if [ -n "$ip" ] ; then
                        ip="[$ip]"
                        [ -n "$prefix" ] || prefix=64
                        ip="[${ip}/${prefix}]"
                        mask=
                    fi
                    if [ -n "$gw" ] ; then
                        gw="[${gw}]"
                    fi
                fi
                if [ -n "$ip" ] && [ -n "$mask" -o -n "$prefix" ]; then
                    echo "ip=$ip::$gw:$mask:$hostname:$dev:none${dns1:+:$dns1}${dns2:+:$dns2}"
                else
                    warn "${iface} does not contain a valid iBFT configuration"
                    warn "ip-addr=$ip"
                    warn "gateway=$gw"
                    warn "subnet-mask=$mask"
                    warn "hostname=$hostname"
                fi
            else
                info "${iface} does not contain a valid iBFT configuration"
                ls -l ${iface} | vinfo
            fi

if [ -e ${iface}/vlan ]; then
                vlan=$(read a < ${iface}/vlan; echo $a)
                if [ "$vlan" -ne "0" ]; then
                    case "$vlan" in
                        [0-9]*)
                            echo "vlan=$dev.$vlan:$dev"
                            echo $mac > /tmp/net.${dev}.${vlan}.has_ibft_config
                            ;;
                        *)
                            echo "vlan=$vlan:$dev"
                            echo $mac > /tmp/net.${vlan}.has_ibft_config
                            ;;
                    esac
                else
                    echo $mac > /tmp/net.${dev}.has_ibft_config
                fi
            else
                echo $mac > /tmp/net.${dev}.has_ibft_config
            fi

done
    ) >> /etc/cmdline.d/40-ibft.conf
}

parse_iscsi_root()
{
    local v
    v=${1#iscsi:}

# extract authentication info
    case "$v" in
        *@*:*:*:*:*)
            authinfo=${v%%@*}
            v=${v#*@}
            # allow empty authinfo to allow having an @ in iscsi_target_name like this:
            # netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
            if [ -n "$authinfo" ]; then
                OLDIFS="$IFS"
                IFS=:
                set $authinfo
                IFS="$OLDIFS"
                if [ $# -gt 4 ]; then
                    warn "Wrong authentication info in iscsi: parameter!"
                    return 1
                fi
                iscsi_username=$1
                iscsi_password=$2
                if [ $# -gt 2 ]; then
                    iscsi_in_username=$3
                    iscsi_in_password=$4
                fi
            fi
            ;;
    esac

# extract target ip
    case "$v" in
        [[]*[]]:*)
            iscsi_target_ip=${v#[[]}
                iscsi_target_ip=${iscsi_target_ip%%[]]*}
            v=${v#[[]$iscsi_target_ip[]]:}
            ;;
        *)
            iscsi_target_ip=${v%%[:]*}
            v=${v#$iscsi_target_ip:}
            ;;
    esac

unset iscsi_target_name
    # extract target name
    case "$v" in
        *:iqn.*)
            iscsi_target_name=iqn.${v##*:iqn.}
            v=${v%:iqn.*}:
            ;;
        *:eui.*)
            iscsi_target_name=eui.${v##*:eui.}
            v=${v%:eui.*}:
            ;;
        *:naa.*)
            iscsi_target_name=naa.${v##*:naa.}
            v=${v%:naa.*}:
            ;;
    esac

# parse the rest
    OLDIFS="$IFS"
    IFS=:
    set $v
    IFS="$OLDIFS"

iscsi_protocol=$1; shift # ignored
    iscsi_target_port=$1; shift

if [ -n "$iscsi_target_name" ]; then
        if [ $# -eq 3 ]; then
            iscsi_iface_name=$1; shift
        fi
        if [ $# -eq 2 ]; then
            iscsi_netdev_name=$1; shift
        fi
        iscsi_lun=$1; shift
        if [ $# -ne 0 ]; then
            warn "Invalid parameter in iscsi: parameter!"
            return 1
        fi
        return 0
    fi

if [ $# -gt 3 ] && [ -n "$1$2" ]; then
        if [ -z "$3" ] || [ "$3" -ge 0 ]  2>/dev/null ; then
            iscsi_iface_name=$1; shift
            iscsi_netdev_name=$1; shift
        fi
    fi

iscsi_lun=$1; shift

iscsi_target_name=$(printf "%s:" "$@")
    iscsi_target_name=${iscsi_target_name%:}
}

ip_to_var() {
    local v=${1}:
    local i
    set --
    while [ -n "$v" ]; do
        if [ "${v#\[*:*:*\]:}" != "$v" ]; then
            # handle IPv6 address
            i="${v%%\]:*}"
            i="${i##\[}"
            set -- "$@" "$i"
            v=${v#\[$i\]:}
        else
            set -- "$@" "${v%%:*}"
            v=${v#*:}
        fi
    done

unset ip srv gw mask hostname dev autoconf macaddr mtu dns1 dns2

if [ $# -eq 0 ]; then
        autoconf="error"
        return 0
    fi

if [ $# -eq 1 ]; then
        # format: ip={dhcp|on|any|dhcp6|auto6|either6}
        # or
        #         ip=<ipv4-address> means anaconda-style static config argument cluster
        autoconf="$1"

if strglob "$autoconf" "*.*.*.*"; then
            # ip=<ipv4-address> means anaconda-style static config argument cluster:
            # ip=<ip> gateway=<gw> netmask=<nm> hostname=<host> mtu=<mtu>
            # ksdevice={link|bootif|ibft|<MAC>|<ifname>}
            ip="$autoconf"
            gw=$(getarg gateway=)
            mask=$(getarg netmask=)
            hostname=$(getarg hostname=)
            dev=$(getarg ksdevice=)
            autoconf="none"
            mtu=$(getarg mtu=)

# handle special values for ksdevice
            case "$dev" in
                bootif|BOOTIF) dev=$(fix_bootif $(getarg BOOTIF=)) ;;
                link) dev="" ;; # FIXME: do something useful with this
                ibft) dev="" ;; # ignore - ibft is handled elsewhere
            esac
        fi
        return 0
    fi

if [ "$2" = "dhcp" -o "$2" = "on" -o "$2" = "any" -o "$2" = "dhcp6" -o "$2" = "auto6" -o "$2" = "either6" ]; then
        # format: ip=<interface>:{dhcp|on|any|dhcp6|auto6}[:[<mtu>][:<macaddr>]]
        [ -n "$1" ] && dev="$1"
        [ -n "$2" ] && autoconf="$2"
        [ -n "$3" ] && mtu=$3
        if [ -z "$5" ]; then
            macaddr="$4"
        else
            macaddr="${4}:${5}:${6}:${7}:${8}:${9}"
        fi
        return 0
    fi

# format: ip=<client-IP>:[<peer>]:<gateway-IP>:<netmask>:<client_hostname>:<interface>:{none|off|dhcp|on|any|dhcp6|auto6|ibft}:[:[<mtu>][:<macaddr>]]

[ -n "$1" ] && ip=$1
    [ -n "$2" ] && srv=$2
    [ -n "$3" ] && gw=$3
    [ -n "$4" ] && mask=$4
    [ -n "$5" ] && hostname=$5
    [ -n "$6" ] && dev=$6
    [ -n "$7" ] && autoconf=$7
    case "$8" in
        [0-9a-fA-F]*:*|[0-9]*.[0-9]*.[0-9]*.[0-9]*)
            dns1="$8"
            [ -n "$9" ] && dns2="$9"
            ;;
        [0-9]*)
            mtu="$8"
            if [ -n "${9}" -a -z "${10}" ]; then
                macaddr="${9}"
            elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
                macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
            fi
            ;;
        *)
            if [ -n "${9}" -a -z "${10}" ]; then
                macaddr="${9}"
            elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
                macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
            fi
	    ;;
    esac
    return 0
}

route_to_var() {
    local v=${1}:
    local i
    set --
    while [ -n "$v" ]; do
        if [ "${v#\[*:*:*\]:}" != "$v" ]; then
            # handle IPv6 address
            i="${v%%\]:*}"
            i="${i##\[}"
            set -- "$@" "$i"
            v=${v#\[$i\]:}
        else
            set -- "$@" "${v%%:*}"
            v=${v#*:}
        fi
    done

unset route_mask route_gw route_dev
    case $# in
        2)  [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"
            return 0;;
        3)  [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"; [ -n "$3" ] && route_dev="$3"
            return 0;;
        *)  return 1;;
    esac
}

parse_ifname_opts() {
    local IFS=:
    set $1

case $# in
        7)
            ifname_if=$1
            # udev requires MAC addresses to be lower case
            ifname_mac=$(echo $2:$3:$4:$5:$6:$7 | sed 'y/ABCDEF/abcdef/')
            ;;
        21)
            ifname_if=$1
            # udev requires MAC addresses to be lower case
            ifname_mac=$(echo $2:$3:$4:$5:$6:$7:$8:$9:${10}:${11}:${12}:${13}:${14}:${15}:${16}:${17}:${18}:${19}:${20}:${21} | sed 'y/ABCDEF/abcdef/')
            ;;
        *)
            die "Invalid arguments for ifname="
            ;;
    esac

case $ifname_if in
        eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]|eth[0-9][0-9][0-9][0-9])
            warn "ifname=$ifname_if uses the kernel name space for interfaces"
            warn "This can fail for multiple network interfaces and is discouraged!"
            warn "Please use a custom name like \"netboot\" or \"bluesocket\""
            warn "or use biosdevname and no ifname= at all."
            ;;
    esac

}

# some network driver need long time to initialize, wait before it's ready.
wait_for_if_link() {
    local cnt=0
    local li
    local timeout="$(getargs rd.net.timeout.iflink=)"
    timeout=${timeout:-60}
    timeout=$(($timeout*10))

while [ $cnt -lt $timeout ]; do
        li=$(ip -o link show dev $1 2>/dev/null)
        [ -n "$li" ] && return 0
        sleep 0.1
        cnt=$(($cnt+1))
    done
    return 1
}

wait_for_if_up() {
    local cnt=0
    local li
    local timeout="$(getargs rd.net.timeout.ifup=)"
    timeout=${timeout:-20}
    timeout=$(($timeout*10))

while [ $cnt -lt $timeout ]; do
        li=$(ip -o link show up dev $1)
        if [ -n "$li" ]; then
            case "$li" in
                *\<UP*)
                    return 0;;
                *\<*,UP\>*)
                    return 0;;
                *\<*,UP,*\>*)
                    return 0;;
            esac
        fi
        if strstr "$li" "LOWER_UP" \
                && strstr "$li" "state UNKNOWN" \
                && ! strstr "$li" "DORMANT"; then
            return 0
        fi
        sleep 0.1
        cnt=$(($cnt+1))
    done
    return 1
}

wait_for_route_ok() {
    local cnt=0
    local timeout="$(getargs rd.net.timeout.route=)"
    timeout=${timeout:-20}
    timeout=$(($timeout*10))

while [ $cnt -lt $timeout ]; do
        li=$(ip route show)
        [ -n "$li" ] && [ -z "${li##*$1*}" ] && return 0
        sleep 0.1
        cnt=$(($cnt+1))
    done
    return 1
}

wait_for_ipv6_dad_link() {
    local cnt=0
    local timeout="$(getargs rd.net.timeout.ipv6dad=)"
    timeout=${timeout:-50}
    timeout=$(($timeout*10))

while [ $cnt -lt $timeout ]; do
        [ -n "$(ip -6 addr show dev "$1" scope link)" ] \
            && [ -z "$(ip -6 addr show dev "$1" scope link tentative)" ] \
            && return 0
        [ -n "$(ip -6 addr show dev "$1" scope link dadfailed)" ] \
            && return 1
        sleep 0.1
        cnt=$(($cnt+1))
    done
    return 1
}

wait_for_ipv6_dad() {
    local cnt=0
    local timeout="$(getargs rd.net.timeout.ipv6dad=)"
    timeout=${timeout:-50}
    timeout=$(($timeout*10))

while [ $cnt -lt $timeout ]; do
        [ -n "$(ip -6 addr show dev "$1")" ] \
            && [ -z "$(ip -6 addr show dev "$1" tentative)" ] \
            && [ -n "$(ip -6 route list proto ra dev "$1" | grep ^default)" ] \
            && return 0
        [ -n "$(ip -6 addr show dev "$1" dadfailed)" ] \
            && return 1
        sleep 0.1
        cnt=$(($cnt+1))
    done
    return 1
}

wait_for_ipv6_auto() {
    local cnt=0
    local timeout="$(getargs rd.net.timeout.ipv6auto=)"
    timeout=${timeout:-40}
    timeout=$(($timeout*10))

while [ $cnt -lt $timeout ]; do
        [ -z "$(ip -6 addr show dev "$1" tentative)" ] \
            && [ -n "$(ip -6 route list proto ra dev "$1" | grep ^default)" ] \
            && return 0
        sleep 0.1
        cnt=$(($cnt+1))
    done
    return 1
}

linkup() {
    wait_for_if_link $1 2>/dev/null\
     && ip link set $1 up 2>/dev/null\
     && wait_for_if_up $1 2>/dev/null
}

type hostname >/dev/null 2>&1 || \
    hostname() {
    cat /proc/sys/kernel/hostname
}

iface_has_carrier() {
    local cnt=0
    local interface="$1" flags=""
    [ -n "$interface" ] || return 2
    interface="/sys/class/net/$interface"
    [ -d "$interface" ] || return 2
    local timeout="$(getargs rd.net.timeout.carrier=)"
    timeout=${timeout:-10}
    timeout=$(($timeout*10))

linkup "$1"

li=$(ip -o link show up dev $1)
    strstr "$li" "NO-CARRIER" && _no_carrier_flag=1

while [ $cnt -lt $timeout ]; do
        if [ -n "$_no_carrier_flag" ]; then
            li=$(ip -o link show up dev $1)
            # NO-CARRIER flag was cleared
            strstr "$li" "NO-CARRIER" || return 0
        elif ! [ -e "$interface/carrier" ]; then
            # sysfs not available and "NO-CARRIER" not displayed
            return 0
        fi
        # double check the syscfs carrier flag
        [ -e "$interface/carrier" ] && [ "$(cat $interface/carrier)" = 1 ] && return 0
        sleep 0.1
        cnt=$(($cnt+1))
    done
    return 1
}

iface_has_link() {
    iface_has_carrier "$@"
}

iface_is_enslaved() {
    local _li
    _li=$(ip -o link show dev $1)
    strstr "$_li" " master " || return 1
    return 0
}

find_iface_with_link() {
    local iface_path="" iface=""
    for iface_path in /sys/class/net/*; do
        iface=${iface_path##*/}
        str_starts "$iface" "lo" && continue
        if iface_has_link $iface; then
            echo "$iface"
            return 0
        fi
    done
    return 1
}

is_persistent_ethernet_name() {
    local _netif="$1"
    local _name_assign_type="0"

[ -f "/sys/class/net/$_netif/name_assign_type" ] \
        && _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")

# NET_NAME_ENUM 1
    [ "$_name_assign_type" = "1" ] && return 1

# NET_NAME_PREDICTABLE 2
    [ "$_name_assign_type" = "2" ] && return 0

case "$_netif" in
        # udev persistent interface names
        eno[0-9]|eno[0-9][0-9]|eno[0-9][0-9][0-9]*)
            ;;
        ens[0-9]|ens[0-9][0-9]|ens[0-9][0-9][0-9]*)
            ;;
        enp[0-9]s[0-9]*|enp[0-9][0-9]s[0-9]*|enp[0-9][0-9][0-9]*s[0-9]*)
            ;;
        enP*p[0-9]s[0-9]*|enP*p[0-9][0-9]s[0-9]*|enP*p[0-9][0-9][0-9]*s[0-9]*)
            ;;
        # biosdevname
        em[0-9]|em[0-9][0-9]|em[0-9][0-9][0-9]*)
            ;;
        p[0-9]p[0-9]*|p[0-9][0-9]p[0-9]*|p[0-9][0-9][0-9]*p[0-9]*)
            ;;
        *)
            return 1
    esac
    return 0
}

is_kernel_ethernet_name() {
    local _netif="$1"
    local _name_assign_type="1"

if [ -e "/sys/class/net/$_netif/name_assign_type" ]; then
        _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")

case "$_name_assign_type" in
            2|3|4)
                # NET_NAME_PREDICTABLE 2
                # NET_NAME_USER 3
                # NET_NAME_RENAMED 4
                return 1
                ;;
            1|*)
                # NET_NAME_ENUM 1
                return 0
                ;;
        esac
    fi

# fallback to error prone manual name check
    case "$_netif" in
        eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]*)
            return 0
            ;;
        *)
            return 1
    esac

}

iface_get_subchannels() {
    local _netif
    local _subchannels

_netif="$1"

_subchannels=$({
                      for i in /sys/class/net/$_netif/device/cdev[0-9]*; do
                          [ -e $i ] || continue
                          channel=$(readlink -f $i)
                          printf -- "%s" "${channel##*/},"
                      done
                  })
    [ -n "$_subchannels" ] || return 1

printf -- "%s" ${_subchannels%,}
}

Back