#$@%#$%!

Ngiler SH3LL 360
: / proc / thread-self / root / proc / thread-self / root / bin /

Information Server
MySQL : OFF Perl : OFF CURL : ON WGET : OFF PKEXEC : OFF

Directive	Local Value
IP Address	162.0.209.101
System	Linux premium169.web-hosting.com 4.18.0-553.50.1.lve.el8.x86_64 #1 SMP Thu Apr 17 19:10:24 UTC 2025 x86_64
User	luxeelil
PHP Version	8.0.30
Software	LiteSpeed
Doc root	Writable

Edit File : splain \| Size : 18.70 KB
#!/usr/bin/perl eval 'exec /usr/bin/perl -S $0 ${1+"$@"}' if $running_under_some_shell; BEGIN { pop @INC if $INC[-1] eq '.' } =head1 NAME diagnostics, splain - produce verbose warning diagnostics =head1 SYNOPSIS Using the C<diagnostics> pragma: use diagnostics; use diagnostics -verbose; enable diagnostics; disable diagnostics; Using the C<splain> standalone filter program: perl program 2>diag.out splain [-v] [-p] diag.out Using diagnostics to get stack traces from a misbehaving script: perl -Mdiagnostics=-traceonly my_script.pl =head1 DESCRIPTION =head2 The C<diagnostics> Pragma This module extends the terse diagnostics normally emitted by both the perl compiler and the perl interpreter (from running perl with a -w switch or C<use warnings>), augmenting them with the more explicative and endearing descriptions found in L<perldiag>. Like the other pragmata, it affects the compilation phase of your program rather than merely the execution phase. To use in your program as a pragma, merely invoke use diagnostics; at the start (or near the start) of your program. (Note that this I<does> enable perl's B<-w> flag.) Your whole compilation will then be subject(ed :-) to the enhanced diagnostics. These still go out B<STDERR>. Due to the interaction between runtime and compiletime issues, and because it's probably not a very good idea anyway, you may not use C<no diagnostics> to turn them off at compiletime. However, you may control their behaviour at runtime using the disable() and enable() methods to turn them off and on respectively. The B<-verbose> flag first prints out the L<perldiag> introduction before any other diagnostics. The $diagnostics::PRETTY variable can generate nicer escape sequences for pagers. Warnings dispatched from perl itself (or more accurately, those that match descriptions found in L<perldiag>) are only displayed once (no duplicate descriptions). User code generated warnings a la warn() are unaffected, allowing duplicate user messages to be displayed. This module also adds a stack trace to the error message when perl dies. This is useful for pinpointing what caused the death. The B<-traceonly> (or just B<-t>) flag turns off the explanations of warning messages leaving just the stack traces. So if your script is dieing, run it again with perl -Mdiagnostics=-traceonly my_bad_script to see the call stack at the time of death. By supplying the B<-warntrace> (or just B<-w>) flag, any warnings emitted will also come with a stack trace. =head2 The I<splain> Program While apparently a whole nuther program, I<splain> is actually nothing more than a link to the (executable) F<diagnostics.pm> module, as well as a link to the F<diagnostics.pod> documentation. The B<-v> flag is like the C<use diagnostics -verbose> directive. The B<-p> flag is like the $diagnostics::PRETTY variable. Since you're post-processing with I<splain>, there's no sense in being able to enable() or disable() processing. Output from I<splain> is directed to B<STDOUT>, unlike the pragma. =head1 EXAMPLES The following file is certain to trigger a few errors at both runtime and compiletime: use diagnostics; print NOWHERE "nothing\n"; print STDERR "\n\tThis message should be unadorned.\n"; warn "\tThis is a user warning"; print "\nDIAGNOSTIC TESTER: Please enter a <CR> here: "; my $a, $b = scalar <STDIN>; print "\n"; print $x/$y; If you prefer to run your program first and look at its problem afterwards, do this: perl -w test.pl 2>test.out ./splain < test.out Note that this is not in general possible in shells of more dubious heritage, as the theoretical (perl -w test.pl >/dev/tty) >& test.out ./splain < test.out Because you just moved the existing B<stdout> to somewhere else. If you don't want to modify your source code, but still have on-the-fly warnings, do this: exec 3>&1; perl -w test.pl 2>&1 1>&3 3>&- \| splain 1>&2 3>&- Nifty, eh? If you want to control warnings on the fly, do something like this. Make sure you do the C<use> first, or you won't be able to get at the enable() or disable() methods. use diagnostics; # checks entire compilation phase print "\ntime for 1st bogus diags: SQUAWKINGS\n"; print BOGUS1 'nada'; print "done with 1st bogus\n"; disable diagnostics; # only turns off runtime warnings print "\ntime for 2nd bogus: (squelched)\n"; print BOGUS2 'nada'; print "done with 2nd bogus\n"; enable diagnostics; # turns back on runtime warnings print "\ntime for 3rd bogus: SQUAWKINGS\n"; print BOGUS3 'nada'; print "done with 3rd bogus\n"; disable diagnostics; print "\ntime for 4th bogus: (squelched)\n"; print BOGUS4 'nada'; print "done with 4th bogus\n"; =head1 INTERNALS Diagnostic messages derive from the F<perldiag.pod> file when available at runtime. Otherwise, they may be embedded in the file itself when the splain package is built. See the F<Makefile> for details. If an extant $SIG{__WARN__} handler is discovered, it will continue to be honored, but only after the diagnostics::splainthis() function (the module's $SIG{__WARN__} interceptor) has had its way with your warnings. There is a $diagnostics::DEBUG variable you may set if you're desperately curious what sorts of things are being intercepted. BEGIN { $diagnostics::DEBUG = 1 } =head1 BUGS Not being able to say "no diagnostics" is annoying, but may not be insurmountable. The C<-pretty> directive is called too late to affect matters. You have to do this instead, and I<before> you load the module. BEGIN { $diagnostics::PRETTY = 1 } I could start up faster by delaying compilation until it should be needed, but this gets a "panic: top_level" when using the pragma form in Perl 5.001e. While it's true that this documentation is somewhat subserious, if you use a program named I<splain>, you should expect a bit of whimsy. =head1 AUTHOR Tom Christiansen <F<tchrist@mox.perl.com>>, 25 June 1995. =cut use strict; use 5.009001; use Carp; $Carp::Internal{__PACKAGE__.""}++; our $VERSION = '1.36'; our $DEBUG; our $VERBOSE; our $PRETTY; our $TRACEONLY = 0; our $WARNTRACE = 0; use Config; use Text::Tabs 'expand'; my $privlib = $Config{privlibexp}; if ($^O eq 'VMS') { require VMS::Filespec; $privlib = VMS::Filespec::unixify($privlib); } my @trypod = ( "$privlib/pod/perldiag.pod", "$privlib/pods/perldiag.pod", ); # handy for development testing of new warnings etc unshift @trypod, "./pod/perldiag.pod" if -e "pod/perldiag.pod"; (my $PODFILE) = ((grep { -e } @trypod), $trypod[$#trypod])[0]; $DEBUG \|\|= 0; local $\| = 1; local $_; local $.; my $standalone; my(%HTML_2_Troff, %HTML_2_Latin_1, %HTML_2_ASCII_7); CONFIG: { our $opt_p = our $opt_d = our $opt_v = our $opt_f = ''; unless (caller) { $standalone++; require Getopt::Std; Getopt::Std::getopts('pdvf:') or die "Usage: $0 [-v] [-p] [-f splainpod]"; $PODFILE = $opt_f if $opt_f; $DEBUG = 2 if $opt_d; $VERBOSE = $opt_v; $PRETTY = $opt_p; } if (open(POD_DIAG, '<', $PODFILE)) { warn "Happy happy podfile from real $PODFILE\n" if $DEBUG; last CONFIG; } if (caller) { INCPATH: { for my $file ( (map { "$_/".__PACKAGE__.".pm" } @INC), $0) { warn "Checking $file\n" if $DEBUG; if (open(POD_DIAG, '<', $file)) { while (<POD_DIAG>) { next unless /^__END__\s# wish diag dbase were more accessible/; print STDERR "podfile is $file\n" if $DEBUG; last INCPATH; } } } } } else { print STDERR "podfile is <DATA>\n" if $DEBUG; POD_DIAG = main::DATA; } } if (eof(POD_DIAG)) { die "couldn't find diagnostic data in $PODFILE @INC $0"; } %HTML_2_Troff = ( 'amp' => '&', # ampersand 'lt' => '<', # left chevron, less-than 'gt' => '>', # right chevron, greater-than 'quot' => '"', # double quote "Aacute" => "A\\'", # capital A, acute accent # etc ); %HTML_2_Latin_1 = ( 'amp' => '&', # ampersand 'lt' => '<', # left chevron, less-than 'gt' => '>', # right chevron, greater-than 'quot' => '"', # double quote "Aacute" => "\xC1" # capital A, acute accent # etc ); %HTML_2_ASCII_7 = ( 'amp' => '&', # ampersand 'lt' => '<', # left chevron, less-than 'gt' => '>', # right chevron, greater-than 'quot' => '"', # double quote "Aacute" => "A" # capital A, acute accent # etc ); our %HTML_Escapes; HTML_Escapes = do { if ($standalone) { $PRETTY ? \%HTML_2_Latin_1 : \%HTML_2_ASCII_7; } else { \%HTML_2_Latin_1; } }; THITHER = $standalone ? STDOUT : STDERR; my %transfmt = (); my $transmo = <<EOFUNC; sub transmo { #local \$^W = 0; # recursive warnings we do NOT need! EOFUNC my %msg; my $over_level = 0; # We look only at =item lines at the first =over level { print STDERR "FINISHING COMPILATION for $_\n" if $DEBUG; local $/ = ''; local $_; my $header; my @headers; my $for_item; my $seen_body; while (<POD_DIAG>) { sub _split_pod_link { $_[0] =~ m'(?:([^\|])\\|)?([^/])(?:/("?)(.)\3)?'s; ($1,$2,$4); } unescape(); if ($PRETTY) { sub noop { return $_[0] } # spensive for a noop sub bold { my $str =$_[0]; $str =~ s/(.)/$1\b$1/g; return $str; } sub italic { my $str = $_[0]; $str =~ s/(.)/_\b$1/g; return $str; } s/C<<< (.?) >>>\|C<< (.?) >>\|[BC]<(.?)>/bold($+)/ges; s/[IF]<(.?)>/italic($1)/ges; s/L<(.?)>/ my($text,$page,$sect) = _split_pod_link($1); defined $text ? $text : defined $sect ? italic($sect) . ' in ' . italic($page) : italic($page) /ges; s/S<(.?)>/ $1 /ges; } else { s/C<<< (.?) >>>\|C<< (.?) >>\|[BC]<(.?)>/$+/gs; s/[IF]<(.?)>/$1/gs; s/L<(.?)>/ my($text,$page,$sect) = _split_pod_link($1); defined $text ? $text : defined $sect ? qq '"$sect" in $page' : $page /ges; s/S<(.?)>/ $1 /ges; } unless (/^=/) { if (defined $header) { if ( $header eq 'DESCRIPTION' && ( /Optional warnings are enabled/ \|\| /Some of these messages are generic./ ) ) { next; } $_ = expand $_; s/^/ /gm; $msg{$header} .= $_; for my $h(@headers) { $msg{$h} .= $_ } ++$seen_body; undef $for_item; } next; } # If we have not come across the body of the description yet, then # the previous header needs to share the same description. if ($seen_body) { @headers = (); } else { push @headers, $header if defined $header; } if ( ! s/=item (.?)\s\z//s \|\| $over_level != 1) { if ( s/=head1\sDESCRIPTION//) { $msg{$header = 'DESCRIPTION'} = ''; undef $for_item; } elsif( s/^=for\s+diagnostics\s\n(.?)\s\z// ) { $for_item = $1; } elsif( /^=over\b/ ) { $over_level++; } elsif( /^=back\b/ ) { # Stop processing body here $over_level--; if ($over_level == 0) { undef $header; undef $for_item; $seen_body = 0; next; } } next; } if( $for_item ) { $header = $for_item; undef $for_item } else { $header = $1; $header =~ s/\n/ /gs; # Allow multi-line headers } # strip formatting directives from =item line $header =~ s/[A-Z]<(.?)>/$1/g; # Since we strip "(\.\s)\n" when we search a warning, strip it here as well $header =~ s/(\.\s)?$//; my @toks = split( /(%l?[dxX]\|%[ucp]\|%(?:\.\d+)?[fs])/, $header ); if (@toks > 1) { my $conlen = 0; for my $i (0..$#toks){ if( $i % 2 ){ if( $toks[$i] eq '%c' ){ $toks[$i] = '.'; } elsif( $toks[$i] =~ /^%(?:d\|u)$/ ){ $toks[$i] = '\d+'; } elsif( $toks[$i] =~ '^%(?:s\|.f)$' ){ $toks[$i] = $i == $#toks ? '.' : '.?'; } elsif( $toks[$i] =~ '%.(\d+)s' ){ $toks[$i] = ".{$1}"; } elsif( $toks[$i] =~ '^%l([pxX])$' ){ $toks[$i] = $1 eq 'X' ? '[\dA-F]+' : '[\da-f]+'; } } elsif( length( $toks[$i] ) ){ $toks[$i] = quotemeta $toks[$i]; $conlen += length( $toks[$i] ); } } my $lhs = join( '', @toks ); $lhs =~ s/(\\\s)+/\\s+/g; # Replace lit space with multi-space match $transfmt{$header}{pat} = " s^\\s$lhs\\s\Q$header\Es\n\t&& return 1;\n"; $transfmt{$header}{len} = $conlen; } else { my $lhs = "\Q$header\E"; $lhs =~ s/(\\\s)+/\\s+/g; # Replace lit space with multi-space match $transfmt{$header}{pat} = " s^\\s$lhs\\s\Q$header\E\n\t && return 1;\n"; $transfmt{$header}{len} = length( $header ); } print STDERR __PACKAGE__.": Duplicate entry: \"$header\"\n" if $msg{$header}; $msg{$header} = ''; $seen_body = 0; } close POD_DIAG unless main::DATA eq POD_DIAG; die "No diagnostics?" unless %msg; # Apply patterns in order of decreasing sum of lengths of fixed parts # Seems the best way of hitting the right one. for my $hdr ( sort { $transfmt{$b}{len} <=> $transfmt{$a}{len} } keys %transfmt ){ $transmo .= $transfmt{$hdr}{pat}; } $transmo .= " return 0;\n}\n"; print STDERR $transmo if $DEBUG; eval $transmo; die $@ if $@; } if ($standalone) { if (!@ARGV and -t STDIN) { print STDERR "$0: Reading from STDIN\n" } while (defined (my $error = <>)) { splainthis($error) \|\| print THITHER $error; } exit; } my $olddie; my $oldwarn; sub import { shift; $^W = 1; # yup, clobbered the global variable; # tough, if you want diags, you want diags. return if defined $SIG{__WARN__} && ($SIG{__WARN__} eq \&warn_trap); for (@_) { /^-d(ebug)?$/ && do { $DEBUG++; next; }; /^-v(erbose)?$/ && do { $VERBOSE++; next; }; /^-p(retty)?$/ && do { print STDERR "$0: I'm afraid it's too late for prettiness.\n"; $PRETTY++; next; }; # matches trace and traceonly for legacy doc mixup reasons /^-t(race(only)?)?$/ && do { $TRACEONLY++; next; }; /^-w(arntrace)?$/ && do { $WARNTRACE++; next; }; warn "Unknown flag: $_"; } $oldwarn = $SIG{__WARN__}; $olddie = $SIG{__DIE__}; $SIG{__WARN__} = \&warn_trap; $SIG{__DIE__} = \&death_trap; } sub enable { &import } sub disable { shift; return unless $SIG{__WARN__} eq \&warn_trap; $SIG{__WARN__} = $oldwarn \|\| ''; $SIG{__DIE__} = $olddie \|\| ''; } sub warn_trap { my $warning = $_[0]; if (caller eq __PACKAGE__ or !splainthis($warning)) { if ($WARNTRACE) { print STDERR Carp::longmess($warning); } else { print STDERR $warning; } } goto &$oldwarn if defined $oldwarn and $oldwarn and $oldwarn ne \&warn_trap; }; sub death_trap { my $exception = $_[0]; # See if we are coming from anywhere within an eval. If so we don't # want to explain the exception because it's going to get caught. my $in_eval = 0; my $i = 0; while (my $caller = (caller($i++))[3]) { if ($caller eq '(eval)') { $in_eval = 1; last; } } splainthis($exception) unless $in_eval; if (caller eq __PACKAGE__) { print STDERR "INTERNAL EXCEPTION: $exception"; } &$olddie if defined $olddie and $olddie and $olddie ne \&death_trap; return if $in_eval; # We don't want to unset these if we're coming from an eval because # then we've turned off diagnostics. # Switch off our die/warn handlers so we don't wind up in our own # traps. $SIG{__DIE__} = $SIG{__WARN__} = ''; $exception =~ s/\n(?=.)/\n\t/gas; die Carp::longmess("__diagnostics__") =~ s/^__diagnostics__.?line \d+\.?\n/ "Uncaught exception from user code:\n\t$exception" /re; # up we go; where we stop, nobody knows, but i think we die now # but i'm deeply afraid of the &$olddie guy reraising and us getting # into an indirect recursion loop }; my %exact_duplicate; my %old_diag; my $count; my $wantspace; sub splainthis { return 0 if $TRACEONLY; for (my $tmp = shift) { local $\; local $!; ### &finish_compilation unless %msg; s/(\.\s)?\n+$//; my $orig = $_; # return unless defined; # get rid of the where-are-we-in-input part s/, <.?> (?:line\|chunk).$//; # Discard 1st " at <file> line <no>" and all text beyond # but be aware of messages containing " at this-or-that" my $real = 0; my @secs = split( / at / ); return unless @secs; $_ = $secs[0]; for my $i ( 1..$#secs ){ if( $secs[$i] =~ /.+? (?:line\|chunk) \d+/ ){ $real = 1; last; } else { $_ .= ' at ' . $secs[$i]; } } # remove parenthesis occurring at the end of some messages s/^\((.)\)$/$1/; if ($exact_duplicate{$orig}++) { return &transmo; } else { return 0 unless &transmo; } my $short = shorten($orig); if ($old_diag{$_}) { autodescribe(); print THITHER "$short (#$old_diag{$_})\n"; $wantspace = 1; } elsif (!$msg{$_} && $orig =~ /\n./s) { # A multiline message, like "Attempt to reload / # Compilation failed" my $found; for (split /^/, $orig) { splainthis($_) and $found = 1; } return $found; } else { autodescribe(); $old_diag{$_} = ++$count; print THITHER "\n" if $wantspace; $wantspace = 0; print THITHER "$short (#$old_diag{$_})\n"; if ($msg{$_}) { print THITHER $msg{$_}; } else { if (0 and $standalone) { print THITHER " **** Error #$old_diag{$_} ", ($real ? "is" : "appears to be"), " an unknown diagnostic message.\n\n"; } return 0; } } return 1; } } sub autodescribe { if ($VERBOSE and not $count) { print THITHER &{$PRETTY ? \&bold : \&noop}("DESCRIPTION OF DIAGNOSTICS"), "\n$msg{DESCRIPTION}\n"; } } sub unescape { s { E< ( [A-Za-z]+ ) > } { do { exists $HTML_Escapes{$1} ? do { $HTML_Escapes{$1} } : do { warn "Unknown escape: E<$1> in $_"; "E<$1>"; } } }egx; } sub shorten { my $line = $_[0]; if (length($line) > 79 and index($line, "\n") == -1) { my $space_place = rindex($line, ' ', 79); if ($space_place != -1) { substr($line, $space_place, 1) = "\n\t"; } } return $line; } 1 unless $standalone; # or it'll complain about itself __END__ # wish diag dbase were more accessible Back

Edit File : splain | Size : 18.70 KB

#!/usr/bin/perl
    eval 'exec /usr/bin/perl -S $0 ${1+"$@"}'
	if $running_under_some_shell;

BEGIN { pop @INC if $INC[-1] eq '.' }

=head1 NAME

diagnostics, splain - produce verbose warning diagnostics

=head1 SYNOPSIS

Using the C<diagnostics> pragma:

use diagnostics;
    use diagnostics -verbose;

enable  diagnostics;
    disable diagnostics;

Using the C<splain> standalone filter program:

perl program 2>diag.out
    splain [-v] [-p] diag.out

Using diagnostics to get stack traces from a misbehaving script:

perl -Mdiagnostics=-traceonly my_script.pl

=head1 DESCRIPTION

=head2 The C<diagnostics> Pragma

This module extends the terse diagnostics normally emitted by both the
perl compiler and the perl interpreter (from running perl with a -w 
switch or C<use warnings>), augmenting them with the more
explicative and endearing descriptions found in L<perldiag>.  Like the
other pragmata, it affects the compilation phase of your program rather
than merely the execution phase.

To use in your program as a pragma, merely invoke

use diagnostics;

at the start (or near the start) of your program.  (Note 
that this I<does> enable perl's B<-w> flag.)  Your whole
compilation will then be subject(ed :-) to the enhanced diagnostics.
These still go out B<STDERR>.

Due to the interaction between runtime and compiletime issues,
and because it's probably not a very good idea anyway,
you may not use C<no diagnostics> to turn them off at compiletime.
However, you may control their behaviour at runtime using the 
disable() and enable() methods to turn them off and on respectively.

The B<-verbose> flag first prints out the L<perldiag> introduction before
any other diagnostics.  The $diagnostics::PRETTY variable can generate nicer
escape sequences for pagers.

Warnings dispatched from perl itself (or more accurately, those that match
descriptions found in L<perldiag>) are only displayed once (no duplicate
descriptions).  User code generated warnings a la warn() are unaffected,
allowing duplicate user messages to be displayed.

This module also adds a stack trace to the error message when perl dies.
This is useful for pinpointing what
caused the death.  The B<-traceonly> (or
just B<-t>) flag turns off the explanations of warning messages leaving just
the stack traces.  So if your script is dieing, run it again with

perl -Mdiagnostics=-traceonly my_bad_script

to see the call stack at the time of death.  By supplying the B<-warntrace>
(or just B<-w>) flag, any warnings emitted will also come with a stack
trace.

=head2 The I<splain> Program

While apparently a whole nuther program, I<splain> is actually nothing
more than a link to the (executable) F<diagnostics.pm> module, as well as
a link to the F<diagnostics.pod> documentation.  The B<-v> flag is like
the C<use diagnostics -verbose> directive.
The B<-p> flag is like the
$diagnostics::PRETTY variable.  Since you're post-processing with 
I<splain>, there's no sense in being able to enable() or disable() processing.

Output from I<splain> is directed to B<STDOUT>, unlike the pragma.

=head1 EXAMPLES

The following file is certain to trigger a few errors at both
runtime and compiletime:

use diagnostics;
    print NOWHERE "nothing\n";
    print STDERR "\n\tThis message should be unadorned.\n";
    warn "\tThis is a user warning";
    print "\nDIAGNOSTIC TESTER: Please enter a <CR> here: ";
    my $a, $b = scalar <STDIN>;
    print "\n";
    print $x/$y;

If you prefer to run your program first and look at its problem
afterwards, do this:

perl -w test.pl 2>test.out
    ./splain < test.out

Note that this is not in general possible in shells of more dubious heritage, 
as the theoretical

(perl -w test.pl >/dev/tty) >& test.out
    ./splain < test.out

Because you just moved the existing B<stdout> to somewhere else.

If you don't want to modify your source code, but still have on-the-fly
warnings, do this:

exec 3>&1; perl -w test.pl 2>&1 1>&3 3>&- | splain 1>&2 3>&-

Nifty, eh?

If you want to control warnings on the fly, do something like this.
Make sure you do the C<use> first, or you won't be able to get
at the enable() or disable() methods.

use diagnostics; # checks entire compilation phase 
	print "\ntime for 1st bogus diags: SQUAWKINGS\n";
	print BOGUS1 'nada';
	print "done with 1st bogus\n";

disable diagnostics; # only turns off runtime warnings
	print "\ntime for 2nd bogus: (squelched)\n";
	print BOGUS2 'nada';
	print "done with 2nd bogus\n";

enable diagnostics; # turns back on runtime warnings
	print "\ntime for 3rd bogus: SQUAWKINGS\n";
	print BOGUS3 'nada';
	print "done with 3rd bogus\n";

disable diagnostics;
	print "\ntime for 4th bogus: (squelched)\n";
	print BOGUS4 'nada';
	print "done with 4th bogus\n";

=head1 INTERNALS

Diagnostic messages derive from the F<perldiag.pod> file when available at
runtime.  Otherwise, they may be embedded in the file itself when the
splain package is built.   See the F<Makefile> for details.

If an extant $SIG{__WARN__} handler is discovered, it will continue
to be honored, but only after the diagnostics::splainthis() function 
(the module's $SIG{__WARN__} interceptor) has had its way with your
warnings.

There is a $diagnostics::DEBUG variable you may set if you're desperately
curious what sorts of things are being intercepted.

BEGIN { $diagnostics::DEBUG = 1 }

=head1 BUGS

Not being able to say "no diagnostics" is annoying, but may not be
insurmountable.

The C<-pretty> directive is called too late to affect matters.
You have to do this instead, and I<before> you load the module.

BEGIN { $diagnostics::PRETTY = 1 }

I could start up faster by delaying compilation until it should be
needed, but this gets a "panic: top_level" when using the pragma form
in Perl 5.001e.

While it's true that this documentation is somewhat subserious, if you use
a program named I<splain>, you should expect a bit of whimsy.

=head1 AUTHOR

Tom Christiansen <F<tchrist@mox.perl.com>>, 25 June 1995.

=cut

use strict;
use 5.009001;
use Carp;
$Carp::Internal{__PACKAGE__.""}++;

our $VERSION = '1.36';
our $DEBUG;
our $VERBOSE;
our $PRETTY;
our $TRACEONLY = 0;
our $WARNTRACE = 0;

use Config;
use Text::Tabs 'expand';
my $privlib = $Config{privlibexp};
if ($^O eq 'VMS') {
    require VMS::Filespec;
    $privlib = VMS::Filespec::unixify($privlib);
}
my @trypod = (
	   "$privlib/pod/perldiag.pod",
	   "$privlib/pods/perldiag.pod",
	  );
# handy for development testing of new warnings etc
unshift @trypod, "./pod/perldiag.pod" if -e "pod/perldiag.pod";
(my $PODFILE) = ((grep { -e } @trypod), $trypod[$#trypod])[0];

$DEBUG ||= 0;

local $| = 1;
local $_;
local $.;

my $standalone;
my(%HTML_2_Troff, %HTML_2_Latin_1, %HTML_2_ASCII_7);

CONFIG: {
    our $opt_p = our $opt_d = our $opt_v = our $opt_f = '';

unless (caller) {
	$standalone++;
	require Getopt::Std;
	Getopt::Std::getopts('pdvf:')
	    or die "Usage: $0 [-v] [-p] [-f splainpod]";
	$PODFILE = $opt_f if $opt_f;
	$DEBUG = 2 if $opt_d;
	$VERBOSE = $opt_v;
	$PRETTY = $opt_p;
    }

if (open(POD_DIAG, '<', $PODFILE)) {
	warn "Happy happy podfile from real $PODFILE\n" if $DEBUG;
	last CONFIG;
    }

if (caller) {
	INCPATH: {
	    for my $file ( (map { "$_/".__PACKAGE__.".pm" } @INC), $0) {
		warn "Checking $file\n" if $DEBUG;
		if (open(POD_DIAG, '<', $file)) {
		    while (<POD_DIAG>) {
			next unless
			    /^__END__\s*# wish diag dbase were more accessible/;
			print STDERR "podfile is $file\n" if $DEBUG;
			last INCPATH;
		    }
		}
	    } 
	}
    } else { 
	print STDERR "podfile is <DATA>\n" if $DEBUG;
	*POD_DIAG = *main::DATA;
    }
}
if (eof(POD_DIAG)) { 
    die "couldn't find diagnostic data in $PODFILE @INC $0";
}

%HTML_2_Troff = (
    'amp'	=>	'&',	#   ampersand
    'lt'	=>	'<',	#   left chevron, less-than
    'gt'	=>	'>',	#   right chevron, greater-than
    'quot'	=>	'"',	#   double quote

"Aacute"	=>	"A\\*'",	#   capital A, acute accent
    # etc

);

%HTML_2_Latin_1 = (
    'amp'	=>	'&',	#   ampersand
    'lt'	=>	'<',	#   left chevron, less-than
    'gt'	=>	'>',	#   right chevron, greater-than
    'quot'	=>	'"',	#   double quote

"Aacute"	=>	"\xC1"	#   capital A, acute accent

# etc
);

%HTML_2_ASCII_7 = (
    'amp'	=>	'&',	#   ampersand
    'lt'	=>	'<',	#   left chevron, less-than
    'gt'	=>	'>',	#   right chevron, greater-than
    'quot'	=>	'"',	#   double quote

"Aacute"	=>	"A"	#   capital A, acute accent
    # etc
);

our %HTML_Escapes;
*HTML_Escapes = do {
    if ($standalone) {
	$PRETTY ? \%HTML_2_Latin_1 : \%HTML_2_ASCII_7; 
    } else {
	\%HTML_2_Latin_1; 
    }
};

*THITHER = $standalone ? *STDOUT : *STDERR;

my %transfmt = (); 
my $transmo = <<EOFUNC;
sub transmo {
    #local \$^W = 0;  # recursive warnings we do NOT need!
EOFUNC

my %msg;
my $over_level = 0;     # We look only at =item lines at the first =over level
{
    print STDERR "FINISHING COMPILATION for $_\n" if $DEBUG;
    local $/ = '';
    local $_;
    my $header;
    my @headers;
    my $for_item;
    my $seen_body;
    while (<POD_DIAG>) {

sub _split_pod_link {
	    $_[0] =~ m'(?:([^|]*)\|)?([^/]*)(?:/("?)(.*)\3)?'s;
	    ($1,$2,$4);
	}

unescape();
	if ($PRETTY) {
	    sub noop   { return $_[0] }  # spensive for a noop
	    sub bold   { my $str =$_[0];  $str =~ s/(.)/$1\b$1/g; return $str; } 
	    sub italic { my $str = $_[0]; $str =~ s/(.)/_\b$1/g;  return $str; } 
	    s/C<<< (.*?) >>>|C<< (.*?) >>|[BC]<(.*?)>/bold($+)/ges;
	    s/[IF]<(.*?)>/italic($1)/ges;
	    s/L<(.*?)>/
	       my($text,$page,$sect) = _split_pod_link($1);
	       defined $text
	        ? $text
	        : defined $sect
	           ? italic($sect) . ' in ' . italic($page)
	           : italic($page)
	     /ges;
	     s/S<(.*?)>/
               $1
             /ges;
	} else {
	    s/C<<< (.*?) >>>|C<< (.*?) >>|[BC]<(.*?)>/$+/gs;
	    s/[IF]<(.*?)>/$1/gs;
	    s/L<(.*?)>/
	       my($text,$page,$sect) = _split_pod_link($1);
	       defined $text
	        ? $text
	        : defined $sect
	           ? qq '"$sect" in $page'
	           : $page
	     /ges;
	    s/S<(.*?)>/
               $1
             /ges;
	} 
	unless (/^=/) {
	    if (defined $header) { 
		if ( $header eq 'DESCRIPTION' && 
		    (   /Optional warnings are enabled/ 
		     || /Some of these messages are generic./
		    ) )
		{
		    next;
		}
		$_ = expand $_;
		s/^/    /gm;
		$msg{$header} .= $_;
		for my $h(@headers) { $msg{$h} .= $_ }
		++$seen_body;
	 	undef $for_item;	
	    }
	    next;
	}

# If we have not come across the body of the description yet, then
	# the previous header needs to share the same description.
	if ($seen_body) {
	    @headers = ();
	}
	else {
	    push @headers, $header if defined $header;
	}

if ( ! s/=item (.*?)\s*\z//s || $over_level != 1) {

if ( s/=head1\sDESCRIPTION//) {
		$msg{$header = 'DESCRIPTION'} = '';
		undef $for_item;
	    }
	    elsif( s/^=for\s+diagnostics\s*\n(.*?)\s*\z// ) {
		$for_item = $1;
	    }
	    elsif( /^=over\b/ ) {
                $over_level++;
            }
	    elsif( /^=back\b/ ) { # Stop processing body here
                $over_level--;
                if ($over_level == 0) {
                    undef $header;
                    undef $for_item;
                    $seen_body = 0;
                    next;
                }
	    }
	    next;
	}

if( $for_item ) { $header = $for_item; undef $for_item } 
	else {
	    $header = $1;

$header =~ s/\n/ /gs; # Allow multi-line headers
	}

# strip formatting directives from =item line
	$header =~ s/[A-Z]<(.*?)>/$1/g;

# Since we strip "(\.\s*)\n" when we search a warning, strip it here as well
	$header =~ s/(\.\s*)?$//;

my @toks = split( /(%l?[dxX]|%[ucp]|%(?:\.\d+)?[fs])/, $header );
	if (@toks > 1) {
            my $conlen = 0;
            for my $i (0..$#toks){
                if( $i % 2 ){
                    if(      $toks[$i] eq '%c' ){
                        $toks[$i] = '.';
                    } elsif( $toks[$i] =~ /^%(?:d|u)$/ ){
                        $toks[$i] = '\d+';
                    } elsif( $toks[$i] =~ '^%(?:s|.*f)$' ){
                        $toks[$i] = $i == $#toks ? '.*' : '.*?';
                    } elsif( $toks[$i] =~ '%.(\d+)s' ){
                        $toks[$i] = ".{$1}";
                    } elsif( $toks[$i] =~ '^%l*([pxX])$' ){
                        $toks[$i] = $1 eq 'X' ? '[\dA-F]+' : '[\da-f]+';
                    }
                } elsif( length( $toks[$i] ) ){
                    $toks[$i] = quotemeta $toks[$i];
                    $conlen += length( $toks[$i] );
                }
            }  
            my $lhs = join( '', @toks );
            $lhs =~ s/(\\\s)+/\\s+/g; # Replace lit space with multi-space match
	    $transfmt{$header}{pat} =
              "    s^\\s*$lhs\\s*\Q$header\Es\n\t&& return 1;\n";
            $transfmt{$header}{len} = $conlen;
	} else {
            my $lhs = "\Q$header\E";
            $lhs =~ s/(\\\s)+/\\s+/g; # Replace lit space with multi-space match
            $transfmt{$header}{pat} =
	      "    s^\\s*$lhs\\s*\Q$header\E\n\t && return 1;\n";
            $transfmt{$header}{len} = length( $header );
	}

print STDERR __PACKAGE__.": Duplicate entry: \"$header\"\n"
	    if $msg{$header};

$msg{$header} = '';
	$seen_body = 0;
    }

close POD_DIAG unless *main::DATA eq *POD_DIAG;

die "No diagnostics?" unless %msg;

# Apply patterns in order of decreasing sum of lengths of fixed parts
    # Seems the best way of hitting the right one.
    for my $hdr ( sort { $transfmt{$b}{len} <=> $transfmt{$a}{len} }
                  keys %transfmt ){
        $transmo .= $transfmt{$hdr}{pat};
    }
    $transmo .= "    return 0;\n}\n";
    print STDERR $transmo if $DEBUG;
    eval $transmo;
    die $@ if $@;
}

if ($standalone) {
    if (!@ARGV and -t STDIN) { print STDERR "$0: Reading from STDIN\n" } 
    while (defined (my $error = <>)) {
	splainthis($error) || print THITHER $error;
    } 
    exit;
}

my $olddie;
my $oldwarn;

sub import {
    shift;
    $^W = 1; # yup, clobbered the global variable; 
	     # tough, if you want diags, you want diags.
    return if defined $SIG{__WARN__} && ($SIG{__WARN__} eq \&warn_trap);

for (@_) {

/^-d(ebug)?$/ 	   	&& do {
				    $DEBUG++;
				    next;
				   };

/^-v(erbose)?$/ 	&& do {
				    $VERBOSE++;
				    next;
				   };

/^-p(retty)?$/ 		&& do {
				    print STDERR "$0: I'm afraid it's too late for prettiness.\n";
				    $PRETTY++;
				    next;
			       };
	# matches trace and traceonly for legacy doc mixup reasons
	/^-t(race(only)?)?$/	&& do {
				    $TRACEONLY++;
				    next;
			       };
	/^-w(arntrace)?$/ 	&& do {
				    $WARNTRACE++;
				    next;
			       };

warn "Unknown flag: $_";
    }

$oldwarn = $SIG{__WARN__};
    $olddie = $SIG{__DIE__};
    $SIG{__WARN__} = \&warn_trap;
    $SIG{__DIE__} = \&death_trap;
}

sub enable { &import }

sub disable {
    shift;
    return unless $SIG{__WARN__} eq \&warn_trap;
    $SIG{__WARN__} = $oldwarn || '';
    $SIG{__DIE__} = $olddie || '';
}

sub warn_trap {
    my $warning = $_[0];
    if (caller eq __PACKAGE__ or !splainthis($warning)) {
	if ($WARNTRACE) {
	    print STDERR Carp::longmess($warning);
	} else {
	    print STDERR $warning;
	}
    } 
    goto &$oldwarn if defined $oldwarn and $oldwarn and $oldwarn ne \&warn_trap;
};

sub death_trap {
    my $exception = $_[0];

# See if we are coming from anywhere within an eval. If so we don't
    # want to explain the exception because it's going to get caught.
    my $in_eval = 0;
    my $i = 0;
    while (my $caller = (caller($i++))[3]) {
      if ($caller eq '(eval)') {
	$in_eval = 1;
	last;
      }
    }

splainthis($exception) unless $in_eval;
    if (caller eq __PACKAGE__) {
	print STDERR "INTERNAL EXCEPTION: $exception";
    } 
    &$olddie if defined $olddie and $olddie and $olddie ne \&death_trap;

return if $in_eval;

# We don't want to unset these if we're coming from an eval because
    # then we've turned off diagnostics.

# Switch off our die/warn handlers so we don't wind up in our own
    # traps.
    $SIG{__DIE__} = $SIG{__WARN__} = '';

$exception =~ s/\n(?=.)/\n\t/gas;

die Carp::longmess("__diagnostics__")
	  =~ s/^__diagnostics__.*?line \d+\.?\n/
		  "Uncaught exception from user code:\n\t$exception"
	      /re;
	# up we go; where we stop, nobody knows, but i think we die now
	# but i'm deeply afraid of the &$olddie guy reraising and us getting
	# into an indirect recursion loop
};

my %exact_duplicate;
my %old_diag;
my $count;
my $wantspace;
sub splainthis {
  return 0 if $TRACEONLY;
  for (my $tmp = shift) {
    local $\;
    local $!;
    ### &finish_compilation unless %msg;
    s/(\.\s*)?\n+$//;
    my $orig = $_;
    # return unless defined;

# get rid of the where-are-we-in-input part
    s/, <.*?> (?:line|chunk).*$//;

# Discard 1st " at <file> line <no>" and all text beyond
    # but be aware of messages containing " at this-or-that"
    my $real = 0;
    my @secs = split( / at / );
    return unless @secs;
    $_ = $secs[0];
    for my $i ( 1..$#secs ){
        if( $secs[$i] =~ /.+? (?:line|chunk) \d+/ ){
            $real = 1;
            last;
        } else {
            $_ .= ' at ' . $secs[$i];
	}
    }

# remove parenthesis occurring at the end of some messages 
    s/^$(.*)$$/$1/;

if ($exact_duplicate{$orig}++) {
	return &transmo;
    } else {
	return 0 unless &transmo;
    }

my $short = shorten($orig);
    if ($old_diag{$_}) {
	autodescribe();
	print THITHER "$short (#$old_diag{$_})\n";
	$wantspace = 1;
    } elsif (!$msg{$_} && $orig =~ /\n./s) {
	# A multiline message, like "Attempt to reload /
	# Compilation failed"
	my $found;
	for (split /^/, $orig) {
	    splainthis($_) and $found = 1;
	}
	return $found;
    } else {
	autodescribe();
	$old_diag{$_} = ++$count;
	print THITHER "\n" if $wantspace;
	$wantspace = 0;
	print THITHER "$short (#$old_diag{$_})\n";
	if ($msg{$_}) {
	    print THITHER $msg{$_};
	} else {
	    if (0 and $standalone) { 
		print THITHER "    **** Error #$old_diag{$_} ",
			($real ? "is" : "appears to be"),
			" an unknown diagnostic message.\n\n";
	    }
	    return 0;
	} 
    }
    return 1;
  }
}

sub autodescribe {
    if ($VERBOSE and not $count) {
	print THITHER &{$PRETTY ? \&bold : \&noop}("DESCRIPTION OF DIAGNOSTICS"),
		"\n$msg{DESCRIPTION}\n";
    } 
}

sub unescape { 
    s {
            E<  
            ( [A-Za-z]+ )       
            >   
    } { 
         do {   
             exists $HTML_Escapes{$1}
                ? do { $HTML_Escapes{$1} }
                : do {
                    warn "Unknown escape: E<$1> in $_";
                    "E<$1>";
                } 
         } 
    }egx;
}

sub shorten {
    my $line = $_[0];
    if (length($line) > 79 and index($line, "\n") == -1) {
	my $space_place = rindex($line, ' ', 79);
	if ($space_place != -1) {
	    substr($line, $space_place, 1) = "\n\t";
	} 
    } 
    return $line;
}

1 unless $standalone;  # or it'll complain about itself
__END__ # wish diag dbase were more accessible

Back